Search results

Metaheuristic algorithms based on biology, evolutionary theory and physical principles, have been widely developed for complex global optimization. This paper aims to present a new hybrid optimization algorithm that combines the characteristics of biogeography-based optimization (BBO), invasive weed optimization (IWO) and genetic algorithms (GAs).

The significant difference between the new algorithm and original optimizers is a periodic selection scheme for offspring. The selection criterion is a function of cyclic discharge and the fitness of populations. It differs from traditional optimization methods where the elite always gains advantages. With this method, fitter populations may still be rejected, while poorer ones might be likely retained. The selection scheme is applied to help escape from local optima and maintain solution diversity.

The efficiency of the proposed method is tested on 13 high-dimensional, nonlinear benchmark functions and a homogenous slope stability problem. The results of the benchmark function show that the new method performs well in terms of accuracy and solution diversity. The algorithm converges with a magnitude of 10-4, compared to 102 in BBO and 10-2 in IWO. In the slope stability problem, the safety factor acquired by the analogy of slope erosion (ASE) is closer to the recommended value.

This paper introduces a periodic selection strategy and constructs a hybrid optimizer, which enhances the global exploration capacity of metaheuristic algorithms.

This study aims to modify a nature-based numerical method named the invasive weed optimization (IWO) method for mobile robot path planning in various complex environments.

The existing IWO method is quick in converging to a feasible solution but in a complex environment; it takes more time as well as computational resources. So, in this paper, the computational part of this artificial intelligence technique is modified with the help of recently developed evolution algorithms like particle swarm optimization, genetic algorithm, etc. Some conditional logic statements were used while doing sensor-based mapping for exploring complex paths. Implementation of sensor-based exploration, mathematical IWO method and prioritizing them for better efficiency made this modified IWO method take complex dynamic decisions.

The proposed modified IWO is better for dynamic obstacle avoidance and navigating a long complex map. The deviation of results in simulation and experiments is less than 5.5%, which validates a good agreement between simulation and real-time testing platforms.

As per a deep literature review, it has found that the proposed approach has not been implemented on the Khepera-III robot for smooth motion planning. Here a dynamic obstacle mapping feature is implemented. A method to selectively distribute seeds instead of a random normal distribution is also implemented in this work. The modified version of IWO is coded in MATLAB and simulated through V-Rep simulation software. The integration of sensors was done through logical conditioning. The simulation results are validated using real-time experiments.

As a strand in industrialization movement in architecture, engineering and construction (AEC) industry, prefabricated construction (PC) has gained widespread popularity due to high efficiency, energy saving, low environmental impacts, safety and other advantages of PC. Well-managed supply chain can further leverage the advantages of PC. However, there is a lack of more systematically overview of the prefabricated construction supply chain (PCSC). This paper aims to comb the current status and look into the future direction of PCSC by reviewing the existing research.

In total, 131 articles related to prefabricated construction supply chain management (PCSCM) from 2000 to 2022 have been collated to (1) conduct a bibliometric analysis by using VOSviewer, including the literature sources, keywords co-occurrence, co-authorships, authorship citation and country active in the field of PCSCM; (2) classify and summarize the status of research in PCSCM through qualitative discussion and (3) point out the future research directions.

In total, 131 articles are carried out for bibliometric analysis and in-depth qualitative discussion, the visualization maps and the main research themes in the field of PCSCM are obtained. The results show that supply chain intelligentization and informatization are hot topics. Finally, future research directions that should be paid attention to in the field of PCSCM are pointed out.

This study can help project managers understand the current status and problems of PCSC operations and provide a basis for future management decisions.

Compared with previous studies, this study adds the dimension of “article authorship” to the quantitative analysis and discusses the research themes in the field of PCSCM in a comprehensive manner. In addition, this paper deeply discusses the main research topics from both the specific contents and research methods adopted.

This research aims to create a methodology that integrates optimization techniques into preliminary cost estimates and predicts the impacts of design alternatives of steel pedestrian bridges (SPBs). The cost estimation process uses two main parameters, but the main goal is to create a cost estimation model.

This study explores a flexible model design that uses computing capabilities for decision-making. Using cost optimization techniques, the model can select an optimal pedestrian bridge system based on multiple criteria that may change independently. This research focuses on four types of SPB systems prevalent in Egypt and worldwide. The study also suggests developing a computerized cost and weight optimization model that enables decision-makers to select the optimal system for SPBs in keeping up with the criteria established for that system.

In this paper, the authors developed an optimization model for cost estimates of SPBs. The model considers two main parameters: weight and cost. The main contribution of this study based on a parametric study is to propose an approach that enables structural engineers and designers to select the optimum system for SPBs.

The implications of this research from a practical perspective are that the study outlines a feasible approach to develop a computerized model that utilizes the capabilities of computing for quick cost optimization that enables decision-makers to select the optimal system for four common SPBs based on multiple criteria that may change independently and in concert with cost optimization during the preliminary design stage.

The model can choose an optimal system for SPBs based on multiple criteria that may change independently and in concert with cost optimization. The resulting optimization model can forecast the optimum cost of the SPBs for different structural spans and road spans based on local unit costs of materials cost of steel structures, fabrication, erection and painting works.

The authors developed a computerized model that uses spreadsheet software's capabilities for cost optimization, enabling decision-makers to select the optimal system for SPBs meeting the criteria established for such a system. Based on structural characteristics and material unit costs, this study shows that using the optimization model for estimating the total direct cost of SPB systems, the project cost can be accurately predicted based on the conceptual design status, and positive prediction outcomes are achieved.

Cloud computing (CC) refers to the usage of virtualization technology to share computing resources through the internet. Task scheduling (TS) is used to assign computational resources to requests that have a high volume of pending processing. CC relies on load balancing to ensure that resources like servers and virtual machines (VMs) running on real servers share the same amount of load. VMs are an important part of virtualization, where physical servers are transformed into VM and act as physical servers during the process. It is possible that a user’s request or data transmission in a cloud data centre may be the reason for the VM to be under or overloaded with data.

VMs are an important part of virtualization, where physical servers are transformed into VM and act as physical servers during the process. It is possible that a user’s request or data transmission in a cloud data centre may be the reason for the VM to be under or overloaded with data. With a large number of VM or jobs, this method has a long makespan and is very difficult. A new idea to cloud loads without decreasing implementation time or resource consumption is therefore encouraged. Equilibrium optimization is used to cluster the VM into underloaded and overloaded VMs initially in this research. Underloading VMs is used to improve load balance and resource utilization in the second stage. The hybrid algorithm of BAT and the artificial bee colony (ABC) helps with TS using a multi-objective-based system. The VM manager performs VM migration decisions to provide load balance among physical machines (PMs). When a PM is overburdened and another PM is underburdened, the decision to migrate VMs is made based on the appropriate conditions. Balanced load and reduced energy usage in PMs are achieved in the former case. Manta ray foraging (MRF) is used to migrate VMs, and its decisions are based on a variety of factors.

The proposed approach provides the best possible scheduling for both VMs and PMs. To complete the task, improved whale optimization algorithm for Cloud TS has 42 s of completion time, enhanced multi-verse optimizer has 48 s, hybrid electro search with a genetic algorithm has 50 s, adaptive benefit factor-based symbiotic organisms search has 38 s and, finally, the proposed model has 30 s, which shows better performance of the proposed model.

User’s request or data transmission in a cloud data centre may cause the VMs to be under or overloaded with data. To identify the load on VM, initially EQ algorithm is used for clustering process. To figure out how well the proposed method works when the system is very busy by implementing hybrid algorithm called BAT–ABC. After the TS process, VM migration is occurred at the final stage, where optimal VM is identified by using MRF algorithm. The experimental analysis is carried out by using various metrics such as execution time, transmission time, makespan for various iterations, resource utilization and load fairness. With its system load, the metric gives load fairness. How load fairness is worked out depends on how long each task takes to do. It has been added that a cloud system may be able to achieve more load fairness if tasks take less time to finish.

Collaborative Logistics (CL) and merging operations are crucial strategies for reducing costs and improving service in transportation companies. This study proposes a model for optimizing efficiency in supply chain networks through inbound and outbound Collaborative Logistics implementation among the carriers in centralized, coordinated networks with cross-docking.

A mixed-integer non-linear programming model is developed to determine the optimal truck-goods assignment while gaining economies of scale through mixing multiple less-than-truckload (LTL) products with different weight-to-volume ratios. Unlike the previous studies that have considered Collaborative Logistics from the cost and profit-sharing perspective, the proposed model seeks to determine an appropriate form of Collaborative Logistics in the VRP.

This article shows that in a three-echelon supply chain consisting of a set of suppliers, a set of customers and a cross-docking terminal, partial collaboration among the inbound carriers and outbound carriers outperforms no/complete collaboration. This approach enhances the supply chain efficiency by minimizing the total transportation costs, the total transportation miles and the total number of trucks and maximizing fleet utilization. While addressing the four points, the role of collaborative logistics among the carriers was discussed. In a three-echelon SC consisting of a set of suppliers, a set of customers and a cross-docking terminal, partial collaboration among the inbound carriers and outbound carriers outperforms no/complete collaboration. Using a combination of experimental analysis and optimization process, it was recommended that managers be cautious that too much (full or complete) or no collaboration can result in SC performance deterioration.

The suggested approach enhances the supply chain efficiency by minimizing the total transportation costs, the total transportation miles and the total number of trucks and maximizing fleet utilization. While addressing the four points, the role of Collaborative Logistics among the carriers was discussed.