Search results

1 – 10 of 11
Article
Publication date: 2 February 2022

Munir Ahmed, Muhammad Shakaib and Mubashir Ali Siddiqui

Combustion of fuel with oxidizer inside a combustion chamber of an internal combustion engine forms inevitable oxides of nitrogen (NOx) due to high temperature at different…

Abstract

Purpose

Combustion of fuel with oxidizer inside a combustion chamber of an internal combustion engine forms inevitable oxides of nitrogen (NOx) due to high temperature at different locations of the combustion chamber. This study aims to quantify NOx formed inside the combustion chamber using two fuels, a conventional diesel (n-heptane) and a biodiesel (methyl oleate).

Design/methodology/approach

This research uses a computational fluid dynamics simulation of chemically reacting fluid flow to quantify and compare oxides of nitrogen (NOx) in a compression ignition (CI) engine. The study expends species transport model of ANSYS FLUENT. The simulation model has provided the temperature profile inside the combustion chamber, which is subsequently used to calculate NOx using the NOx model. The simulation uses a single component hydrocarbon and oxygenated hydrocarbon to represent fuels; for instance, it uses n-heptane (C7H16) for diesel and methyl-oleate (C19H36O2) for biodiesel. A stoichiometric air–fuel mixture is used for both fuels. The simulation runs a single cylinder CI engine of 650 cm3 swept volume with inlet and exhaust valves closed.

Findings

The pattern for variation of velocity, an important flow parameter, which affects combustion and subsequently oxides of nitrogen (NOx) formation at different piston locations, is similar for the two fuels. The variations of in-cylinder temperature and NOx formation with crank angles have similar patterns for the fuels, diesel and biodiesel. However, the numerical values of in-cylinder temperature and mass fraction of NOx are different. The volume averaged static peak temperatures are 1,013 K in case of diesel and 1,121 K in case of biodiesel, while the mass averaged mass fractions of NOx are 15 ppm for diesel and 141 ppm for biodiesel. The temperature rise after combustion is more in case of biodiesel, which augments the oxides of nitrogen formation. A new parameter, relative mass fraction of NOx, yields 28% lower value for biodiesel than for diesel.

Originality/value

This work uses a new concept of simulating simple chemical reacting system model to quantify oxides of NOx using single component fuels. Simplification has captured required fluid flow data to analyse NOx emission from CI engine while reducing computational time and expensive experimental tests.

Details

Journal of Engineering, Design and Technology , vol. 22 no. 2
Type: Research Article
ISSN: 1726-0531

Keywords

Article
Publication date: 13 September 2022

Yufang Cheng, Meng-Han Lee, Chung-Sung Yang and Pei-Yu Wu

The purpose of this study was to develop the augmented reality (AR) educational program combined with the instructional guidance for supportive learning, which enhanced the…

Abstract

Purpose

The purpose of this study was to develop the augmented reality (AR) educational program combined with the instructional guidance for supportive learning, which enhanced the thinking process cooperative discussion and problem-solving skills in chemistry subject.

Design/methodology/approach

The method used the quasi-experimental research design. Of the 45 students who attended this experiment, only 25 with low achievement qualified in operating the AR learning system of saponification and transesterification environment (ARLS-STE) system.

Findings

These results confirmed that the AR educational program could have increased substantial benefits in improvements of students’ knowledge and the ability of the thinking process for the participants with the lowest score. In semi-structured interviews, most of participants enjoyed manipulating the ARLS-STE system, which was realistic, motived and interesting for learning science subjects.

Originality/value

The low-achieving students have often been known with a low learning capability, and they lack in developing constructional knowledge, despite being keen for learning. Regarding educational concerns for this population, providing orientated learning and supportive materials could increase their learning effects. Virtual worlds are an efficient learning tool in educational setting. The AR can offer visual concepts and physical interaction for students with low achievement in learning. Thus, this study investigates the acceptability of an educational program designed in the ARLS-STE, which involves the learning effects of academic knowledge and the capability of thinking process for students with low achievement. The ARLS-STE system was developed for this proposal, based upon the marker-based AR technologies combined with hands-on manipulation.

Details

Interactive Technology and Smart Education, vol. 21 no. 1
Type: Research Article
ISSN: 1741-5659

Keywords

Open Access
Article
Publication date: 15 January 2024

Marcello Braglia, Francesco Di Paco, Roberto Gabbrielli and Leonardo Marrazzini

This paper presents a new and well-structured framework that aims to assess the current environmental impact from a Greenhouse Gas (GHG) emissions perspective. This tool includes…

431

Abstract

Purpose

This paper presents a new and well-structured framework that aims to assess the current environmental impact from a Greenhouse Gas (GHG) emissions perspective. This tool includes a new set of Lean Key Performance Indicators (KPIs), which translates the well-known logic of Overall Equipment Effectiveness in the field of GHG emissions, that can progressively detect industrial losses that cause GHG emissions and support decision-making for implementing improvements.

Design/methodology/approach

The new metrics are presented with reference to two different perspectives: (1) to highlight the deviation of the current value of emissions from the target; (2) to adopt a diagnostic orientation not only to provide an assessment of current performance but also to search for the main causes of inefficiencies and to direct improvement implementations.

Findings

The proposed framework was applied to a major company operating in the plywood production sector. It identified emission-related losses at each stage of the production process, providing an overall performance evaluation of 53.1%. The industrial application shows how the indicators work in practice, and the framework as a whole, to assess GHG emissions related to industrial losses and to proper address improvement actions.

Originality/value

This paper scrutinizes a new set of Lean KPIs to assess the industrial losses causing GHG emissions and identifies some significant drawbacks. Then it proposes a new structure of losses and KPIs that not only quantify efficiency but also allow to identify viable countermeasures.

Details

International Journal of Productivity and Performance Management, vol. 73 no. 11
Type: Research Article
ISSN: 1741-0401

Keywords

Open Access
Article
Publication date: 2 February 2024

Shahryar Sorooshian, Navidreza Ahadi and Ahmed Zainul Abideen

This study aims to assess the response of the Association of Southeast Asian Nations (ASEAN) to cleaner production and environmental sustainability, with a specific focus on…

368

Abstract

Purpose

This study aims to assess the response of the Association of Southeast Asian Nations (ASEAN) to cleaner production and environmental sustainability, with a specific focus on identifying the leading countries and research networks driving these efforts.

Design/methodology/approach

A benchmarking academic journal was chosen, and the journal’s archive was comprehensively examined. To construct the data set, a conventional keyword search technique was applied in February 2023 to filter for ASEAN affiliations. The study used hybrid bibliometric analyses and multi-criteria decision analysis (MCDA) to analyze the collected data and address the research purpose.

Findings

The data analysis revealed a rising research trend, particularly after 2014. Malaysia had the most publications, followed by Thailand and Singapore, and their publications had the most cumulative citations among ASEAN countries. Research collaborations between Malaysia, Thailand and Singapore were frequent, but participation from other countries was low. The research topics on which ASEAN members focused were also identified, but it became apparent that there was little coordination. A scant few collaborations involving more than two countries were observed; thus, the MCDA analysis concluded that research leadership was absent in ASEAN countries.

Originality/value

This study contributes insights to the existing literature and offers a valuable overview of the research direction and collaboration status of cleaner production and environmental sustainability in the ASEAN region, thus benefiting policymakers. Additionally, this study introduces a novel approach combining bibliometrics analysis with MCDA to assess research collaboration, thus providing a novel methodology for future research policy evaluations.

Article
Publication date: 21 March 2024

Camille J. Mora, Arunima Malik, Sruthi Shanmuga and Baljit Sidhu

Businesses are increasingly vulnerable and exposed to physical climate change risks, which can cascade through local, national and international supply chains. Currently, few…

Abstract

Purpose

Businesses are increasingly vulnerable and exposed to physical climate change risks, which can cascade through local, national and international supply chains. Currently, few methodologies can capture how physical risks impact businesses via the supply chains, yet outside the business literature, methodologies such as sustainability assessments can assess cascading impacts.

Design/methodology/approach

Adopting a scoping review framework by Arksey and O'Malley (2005) and the PRISMA extension for scoping reviews (PRISMA-ScR), this paper reviews 27 articles that assess climate risk in supply chains.

Findings

The literature on supply chain risks of climate change using quantitative techniques is limited. Our review confirms that no research adopts sustainability assessment methods to assess climate risk at a business-level.

Originality/value

Alongside the need to quantify physical risks to businesses is the growing awareness that climate change impacts traverse global supply chains. We review the state of the literature on methodological approaches and identify the opportunities for researchers to use sustainability assessment methods to assess climate risk in the supply chains of an individual business.

Details

Journal of Accounting Literature, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0737-4607

Keywords

Article
Publication date: 15 March 2024

Audu Ibrahim Ali, Mohd Kameil Abdul Hamid, Mohd Azman Bin Abas, Mohd Farid Muhamad Said, Anthony Chukwunonso Opia, Izhari Izmi Bin Mazali and Zul Hilmi Bin Che Daud

Due to the environmental issues caused by petroleum lubricants used in lubrication, the concept of creating various bio-lubricants requires research globally. Thus, this study…

Abstract

Purpose

Due to the environmental issues caused by petroleum lubricants used in lubrication, the concept of creating various bio-lubricants requires research globally. Thus, this study aims to develop, characterize and test the base ficus carica oil (fig oil) for its ethylene vinyl acetate copolymer (EVA) and sodium dodecylbenzene sulfonate (SDBS) content.

Design/methodology/approach

The sample characterization was done using the Fourier transmission infrared spectrum, whereas the morphologies of the EVA, SDBS particles and lubricated surfaces were carried out under scanning electron microscope equipment. To ensure the homogeneity of the solution (base oil and additives), the formulations were subjected to the sonication process. The anti-friction and anti-wear properties of EVA and SDBS particles as lubricant additives were investigated using a ball on a flat high-frequency reciprocating rig tribo-tester.

Findings

According to the findings, the base oil’s anti-friction and anti-wear capabilities can be greatly enhanced by the additions. revealed that the best results were obtained when 1.2% EVA + 2% SDBS was applied for the examination of wear (597.8 µm) and friction coefficient (0.106). Commercial references were used, nevertheless, and the results were excellent. This is because the particles in the contact area during lubrication have strong solubility and quickly penetrate the contact zone. The lubricating mechanisms were explained by a tribological model of the EVA + SDBS and SDBS particles.

Research limitations/implications

The coefficient of friction and wear reduction caused by the use of the additives will certainly enhance system performance and protect the machine components from excessive wear that could cause damage or failure.

Originality/value

The originality and uniqueness of this work are officially affirmed by the authors. The authors’ autonomous and original contribution to the development of sustainable lubrication is represented in this work. To the best of the authors’ knowledge, no other study has been published or made publicly available that duplicates the precise scope and goals of our research, and this conclusion is based on a thorough literature assessment.

Details

Industrial Lubrication and Tribology, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 12 September 2023

Myriam Ertz, Shashi Kashav, Tian Zeng and Shouheng Sun

Traditionally, life cycle assessment (LCA) has focused on environmental aspects, but integrating social aspects in LCA has gained traction among scholars and practitioners. This…

Abstract

Purpose

Traditionally, life cycle assessment (LCA) has focused on environmental aspects, but integrating social aspects in LCA has gained traction among scholars and practitioners. This study aims to review key social life cycle assessment (SLCA) themes, namely, drivers and barriers of SLCA implementation, methodology and measurement metrics, classification of initiatives to improve SLCA and customer perspectives in SLCA.

Design/methodology/approach

A total of 148 scientific papers extracted from the Web of Science database were used and analyzed using bibliometric and content analysis.

Findings

The findings suggest that the existing research ignores several aspects of SCLA, which impedes positive growth in topical scholarship, and the study proposes a classification of SLCA research paths to enrich future research. This study contributes positively to SLCA by further developing this area, and as such, this research is a primer to gain deeper knowledge about the state-of-the-art in SLCA as well as to foresee its future scope and challenges.

Originality/value

The study provides an up-to-date review of extant research pertaining to SLCA.

Open Access
Article
Publication date: 25 March 2024

Hossein Shakibaei, Seyyed Amirmohammad Moosavi, Amir Aghsami and Masoud Rabbani

Throughout human history, the occurrence of disasters has been inevitable, leading to significant human, financial and emotional consequences. Therefore, it is crucial to…

Abstract

Purpose

Throughout human history, the occurrence of disasters has been inevitable, leading to significant human, financial and emotional consequences. Therefore, it is crucial to establish a well-designed plan to efficiently manage such situations when disaster strikes. The purpose of this study is to develop a comprehensive program that encompasses multiple aspects of postdisaster relief.

Design/methodology/approach

A multiobjective model has been developed for postdisaster relief, with the aim of minimizing social dissatisfaction, economic costs and environmental damage. The model has been solved using exact methods for different scenarios. The objective is to achieve the most optimal outcomes in the context of postdisaster relief operations.

Findings

A real case study of an earthquake in Haiti has been conducted. The acquired results and subsequent management analysis have effectively assessed the logic of the model. As a result, the model’s performance has been validated and deemed reliable based on the findings and insights obtained.

Originality/value

Ultimately, the model provides the optimal quantities of each product to be shipped and determines the appropriate mode of transportation. Additionally, the application of the epsilon constraint method results in a set of Pareto optimal solutions. Through a comprehensive examination of the presented solutions, valuable insights and analyses can be obtained, contributing to a better understanding of the model’s effectiveness.

Details

Journal of Humanitarian Logistics and Supply Chain Management, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2042-6747

Keywords

Open Access
Article
Publication date: 6 February 2024

Italo Cesidio Fantozzi, Sebastiano Di Luozzo and Massimiliano Maria Schiraldi

The purpose of the study is to identify the soft skills and abilities that are crucial to success in the fields of operations management (OM) and supply chain management (SCM)…

Abstract

Purpose

The purpose of the study is to identify the soft skills and abilities that are crucial to success in the fields of operations management (OM) and supply chain management (SCM), using the O*NET database and the classification of a set of professional figures integrating values for task skills and abilities needed to operate successfully in these professions.

Design/methodology/approach

The study used the O*NET database to identify the soft skills and abilities required for success in OM and SCM industries. Correlation analysis was conducted to determine the tasks required for the job roles and their characteristics in terms of abilities and soft skills. ANOVA analysis was used to validate the findings. The study aims to help companies define specific assessments and tests for OM and SCM roles to measure individual attitudes and correlate them with the job position.

Findings

As a result of the work, a set of soft skills and abilities was defined that allow, through correlation analysis, to explain a large number of activities required to work in the operations and SCM (OSCM) environment.

Research limitations/implications

The work is inherently affected by the database used for the professional figures mapped and the scores that are attributed within O*NET to the analyzed elements.

Practical implications

The information resulting from this study can help companies develop specific assessments and tests for the roles of OM and SCM to measure individual attitudes and correlate them with the requirements of the job position. The study aims to address the need to identify soft skills in the human sphere and determine which of them have the most significant impact on the OM and SCM professions.

Originality/value

The originality of this study lies in its approach to identify the set of soft skills and abilities that determine success in the OM and SCM industries. The study used the O*NET database to correlate the tasks required for specific job roles with their corresponding soft skills and abilities. Furthermore, the study used ANOVA analysis to validate the findings in other sectors mapped by the same database. The identified soft skills and abilities can help companies develop specific assessments and tests for OM and SCM roles to measure individual attitudes and correlate them with the requirements of the job position. In addressing the necessity for enhanced clarity in the domain of human factor, this study contributes to identifying key success factors. Subsequent research can further investigate their practical application within companies to formulate targeted growth strategies and make appropriate resource selections for vacant positions.

Details

The TQM Journal, vol. 36 no. 9
Type: Research Article
ISSN: 1754-2731

Keywords

Article
Publication date: 14 November 2023

Yasir Abdullah Abbas, Nurwati A. Ahmad-Zaluki and Waqas Mehmood

This paper examines the relationship between the extent and quality of the four dimensions of corporate social responsibility disclosure (CSRD) namely community, environment…

Abstract

Purpose

This paper examines the relationship between the extent and quality of the four dimensions of corporate social responsibility disclosure (CSRD) namely community, environment, workplace and marketplace with the long-run share price performance of Malaysian initial public offering (IPO) companies.

Design/methodology/approach

This study utilised secondary data by the content analysis of the annual reports and Datastream of 115 IPOs listed from 2007 to 2015 in Malaysia. The IPO’s performance was determined by calculating the return measures under the equally weighted and value-weighted schemes of the mean abnormal returns and buy-and-hold abnormal returns covering the three years post-listing using the event-time approach.

Findings

The findings demonstrate that Malaysian IPOs experience substantial overperformance and underperformance when both the IPO performance measures are benchmarked against the matched companies and market. The results indicated that the extent and quality of the community and environment CSRD dimensions are positively and significantly correlated to the IPO’s performance. On the other hand, the extent and quality of the workplace and marketplace CSRD dimensions are negatively and significantly correlated to the IPO performance.

Practical implications

Malaysian regulators could benefit from these findings in their endeavour to carry out a reform process on CSRD to improve its quality. The results of this study are important to investors, regulators, non-government organisations, communities and policymakers. They also enhance the understanding of companies about the importance of disclosing greater CSR information to improve their performance and profitability.

Originality/value

To the researchers' best knowledge, this study provides new insights into the association between CSRD and the performance of Malaysian IPO companies, which is considered important.

Details

Management of Environmental Quality: An International Journal, vol. 35 no. 3
Type: Research Article
ISSN: 1477-7835

Keywords

1 – 10 of 11