Search results

This paper aims to present the application of a tailored systematic engineering design procedure to the concept design of a small production plant for compostable packaging made by straw fibres and bioplastic. In particular, the obtained boxes are intended to be used for wine bottles.

A systematic procedure has been adopted, which underpins on a comprehensive analysis of the design requirements and the function modelling of the process. By considering well-known models of the engineering design process, the work focuses on the early design stages that precede the embodiment design of the whole components of the plant.

The followed design approach allowed to preliminarily evaluate different alternatives of the process from a functional point of view, thus allowing to identify the preferred conceptual process solution. Based on the identified functional sequence, a first evaluation of the potential productivity and the required human resources has been performed.

The procedure shown in this work has been applied only for the considered case of compostable packaging, and other applications are needed to optimize it. Nevertheless, the adopted systematic approach can be adapted for any context where it is necessary to conceive a new production plant for artefacts made by innovative materials.

The work presented in this paper represents one of the few practical examples available in the literature where systematic conceptual design procedures are presented. More specifically, to the best of the authors’ knowledge, this is the very first application of systematic design methods to compostable packaging production.

This study aims to get rid of non-degradable polyvinyl chloride (PVC) waste as well as sunflower seed cake (SSC) waste by preparing eco-friendly composites from both in different proportions to reach good mechanical and insulating properties for antimicrobial and antistatic applications.

Eco-friendly composite films based on waste polyvinylchloride (WPVC) and SSC of concentrations (0, 10, 20, 30 and 40 Wt.%) were prepared using solution casting method. Further, the effect of sunflower seed oil (SSO) on the biophysical properties of the prepared composites is also investigated. Fourier transform infrared spectroscopy, X-ray diffraction (XRD), scanning electron microscope, mechanical, thermal, dielectric properties were assessed. Besides, the antimicrobial and biodegradation tests were also studied.

The crystallinity increases by rising SSC concentration as revealed by XRD results. Additionally, the permittivity (ε′) increases by increasing SSC filler and SSO as well. A remarkable increase in dc conductivity was attained after the addition of SSO. While raw WPVC has very low bacterial activity. The composite films are found to be very effective against staphylococcus epidermidis, staphylococcus aureus bacteria and against candida albicans as well. On the other hand, the weight loss of WPVC increases by adding of SSC and SSO, as disclosed by biodegradation studies.

The study aims to reach the optimum method for safe and beneficial disposal of PVC waste as well as SSC for antistatic and antimicrobial application.

The purpose of this article is twofold. First, this study characterises the current state of the bio-packaging market's development. Second, it identifies key factors influencing and possible scenarios of the bio-packaging market transition to increase the market share of compostable packaging.

The results of 29 in-depth interviews (IDIs) with representatives of the key groups of bio-packaging supply chains' (SCs') stakeholders were the input for the consideration of the research problem.

The main economic, legal, social and technological enablers and barriers to the bio-packaging regime transition are recognised, and their impact at the market level is explained. The authors recognised the hybrid transition scenario towards an increase in the market share of compostable packaging related to the three traditional pathways of transformation, reconfiguration and technological substitution.

This study contributes to a better understanding of the socio-technical system theory by examining interdependencies between landscape (external environment), market regime (bio-packaging market) and niche innovations (compostable packaging) as well as system transition pathways. The findings and conclusions on bio-packaging market developments can be important lessons learnt to be applied in different countries due to the same current development stage of the compostable packaging lifecycle worldwide.

The purpose of this study is to improve the mechanical property and processing performance and reduce the cost of the polylacticacid/polybutyleneadipate-co-terephthalate(PLA/PBAT) composites, the calcium carbonate (CaCO₃) and compatibilizer styrene-maleicanhydride copolymer (SMA-2025) were added to the PLA/PBAT system, and the effect of CaCO₃ and SMA-2025 on the morphology, structure, mechanical property, thermal property, thermalstability and shape memory property of the CaCO₃/PLA/PBAT composites were studied and discussed.

The CaCO₃/PLA/PBAT shape memory composites were prepared via melt-blending and hot-pressing methods, and the effect of CaCO₃ and SMA-2025 on the property of the composites was investigated via scanning electron microscope, universal testing instrument, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis and DMA, respectively.

The interface property, mechanical property, thermal stability, shape memory recovery ratios and recovery stresses, and processing performance of the CaCO₃/PLA/PBAT shape memory composites were significantly improved by adding of CaCO₃ and SMA-2025. Moreover, the CaCO₃/PLA/PBAT composites have good blowing film processing performance.

This study will provide a reference for the research, processing and application of the high-performance CaCO₃/PLA/PBAT shape memory composites.

This study aims to focus on the main materials used in consolidation processes of illuminated paper manuscripts and leather binding.

For each material, chemical structure, chemical composition, molecular formula, solubility, advantages, disadvantages and its role in treatment process are presented.

This study concluded that carboxy methyl cellulose, hydroxy propyl cellulose, methyl cellulose, cellulose acetate, nanocrystalline cellulose, funori, sturgeon glue, poly vinyl alcohol, chitosan, chitosan nanoparticles (NPs), gelatin, aquazol, paraloid B72 and hydroxyapatite NPs were the most common and important materials used for the consolidation of illuminated paper manuscripts. For the leather bindings, hydroxy propyl cellulose, polyethylene glycol, oligomeric melamine-formaldehyde resin, acrylic wax SC6000, pliantex, paraloid B67 and B72, silicone oil and collagen NPs are the most consolidants used.

Illuminated paper manuscripts with leather binding are considered one of the most important objects in libraries, museums and storehouses. The uncontrolled conditions and other deterioration factors inside the libraries and storehouses lead to degradation of these artifacts. The brittleness, fragility and weakness are considered the most common deterioration aspects of illuminated paper manuscripts and leather binding. Therefore, the consolidation process became vital and important to solve this problem. This study presents the main materials used for consolidation process of illuminated paper manuscripts and leather bindings.

The purpose of this study is to investigate starch mucor (SM) in potassium iodide (KI) as corrosion inhibitor of aluminium in hydrochloric acid (HCl) medium.

The SM in KI was characterized by gravimetric, scanning electron microscopy, electrochemical impedance spectroscopy measurements, potentiodynamic polarization and gas chromatography-mass spectrometer techniques. The inhibition efficiency was optimized using response surface methodology.

The result revealed that the inhibitor inhibited corrosion at a low concentration with the rate of inhibition increasing as the concentration of the inhibitor increased. The inhibition efficiency increases as the temperature was increased with slight incorporation of the inhibitor (SM in KI). This indicates that the corrosion control is both inhibitor (SM in KI) and temperature dependent.

The research results can provide the basis for using SM in KI as corrosion inhibitor of aluminium in HCL medium. Mixed-type inhibitor nature of SM was proved by cathodic and anodic nature of the polarization curves.

Intense interest has been shown in creating new and effective biocide agents as a result of changes in bacterial isolates, bacterial susceptibility to antibiotics, an increase in patients with burns and wounds and the difficulty of treating infections and antimicrobial resistance. Woven, nonwoven and knitted materials are used to make dressings; however, nonwoven dressings are becoming more popular because of their softness and high absorption capacity. Additionally, textiles have excellent geometrical, physical and mechanical features including three-dimensional structure availability, air, vapor and liquid permeability, strength, extensibility, flexibility and diversity of fiber length, fineness and cross-sectional shapes. It is necessary to treat every burn according to international protocol and along with it has to focus on particular problems of patients and the best possible results.

The objective of this paper is to conduct a thorough examination of research pertaining to the utilization of textiles, as well as alternative materials and innovative techniques, in the context of burn wound dressings. Through a critical analysis of the findings, this study intends to provide valuable insights that can inform and guide future research endeavors in this field.

In the past years, there have been several dressings such as xeroform petrolatum gauze, silver-impregnated dressings, biological dressings, hydrocolloid dressings, polyurethane film dressings, silicon-coated nylon dressings, dressings for biosynthetic skin substitutes, hydrogel dressings, newly developed dressings, scaffold bandages, Sorbalgon wound dressing, negative pressure therapy, enzymatic debridement and high-pressure water irrigation developed for the fast healing of burn wounds.

This research conducts a thorough analysis of the role of textiles in modern burn wound dressings.

This study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when incorporated into the nonpolar ethylene propylene diene (EPDFM) rubber matrix, focusing on its reinforcing and antioxidant effect on the resulting EPDM composites.

The structure of the prepared EPDM composites was confirmed by Fourier-transform infrared spectroscopy, and the dispersion of the additive fillers and antioxidants in the EPDM matrix was investigated using scanning electron microscopy. Also, the rheometric characteristics, mechanical properties, swelling behavior and thermal gravimetric analysis of all the prepared EPDM composites were explored as well.

Results revealed that the Cu-LSF complex dispersed well in the nonpolar EPDM rubber matrix, in thepresence of coupling system, with enhanced Cu-LSF-rubber interactions and increased cross-linking density, which reflected on the improved rheological and mechanical properties of the resulting EPDM composites. From the various investigations performed in the current study, the authors can suggest 7–11 phr is the optimal effective concentration of Cu-LSF complex loading. Interestingly, EPDM composites containing Cu-LSF complex showed better antiaging performance, thermal stability and fluid resistance, when compared with those containing the commercial antioxidants (2,2,4-trimethyl-1,2-dihydroquinoline and N-isopropyl-N’-phenyl-p-phenylenediamine). These findings are in good agreement with our previous study on polar nitrile butadiene rubber.

The current study suggests the green biomass-derived Cu-LSF complex to be a promising low-cost and environmentally safe alternative filler and antioxidant to the hazardous commercial ones.

The world is increasingly threatened by climate change. As the dimensions of this danger grow, it becomes essential to develop the most effective policies to mitigate its impacts and adapt to these new conditions. Technology is one of the most crucial components of this process, and this study focuses on examining climate change adaptation technologies. The aim of the study is to investigate the entire spectrum of technology actors and to concentrate on the technology citation network established from the past to the present, aiming to identify the core actors within this structure and provide a more comprehensive outlook.

The study explores patent citation relationships using social network analysis. It utilizes patent data published between 2000 and 2023 and registered by the US Patent and Trademark Office.

Study findings reveal that technologies related to greenhouse technologies in agriculture, technologies for combatting vector-borne diseases in the health sector, rainwater harvesting technologies for water management, and urban green infrastructure technologies for infrastructure systems emerge as the most suitable technologies for adaptation. For instance, greenhouse technologies hold significant potential for sustainable agricultural production and coping with the adverse effects of climate change. Additionally, ICTs establish intensive connections with nearly all other technologies, thus supporting our efforts in climate change adaptation. These technologies facilitate data collection, analysis, and management, contributing to a better understanding of the impacts of climate change.

Existing patent analysis methods often fall short in detailing the unique contributions of each technology within a technological network. This study addresses this deficiency by comprehensively examining and evaluating each technology within the network, thereby enabling us to better understand how these technologies interact with each other and contribute to the overall technological landscape.

The purpose of this study is to investigate the influence of light intensity and sources of carbon and nitrogen on the cultivation of Spirulina maxima.

Cultures were carried out in a modified Zarrouk medium using urea, sodium acetate and glycerol. A Taguchi experimental design was used to evaluate the effect on the production of biocompounds: productivities in biomass, carbohydrates, phycocyanin and biochar were analyzed.

Statistical data analysis revealed that light intensity and sodium acetate concentration were the most important factors, being significant in three of the four response variables studied. The highest productivities in biomass (46.94 mg.L⁻¹.d⁻¹), carbohydrates (6.11 mg.L⁻¹.d⁻¹), phycocyanin (3.62 mg.L⁻¹.d⁻¹) and biochar (22, 48 mg.L⁻¹.d⁻¹) were achieved in experiment 4 of the Taguchi matrix, highlighting as the ideal condition for the production of biomass, carbohydrates and phycocyanin.

Sodium acetate and urea can be considered, respectively, as potential sources of carbon and nitrogen to increase Spirulina maxima productivity. From the results, an optimized cultivation condition for the sustainable production of bioproducts was obtained.

This work focuses on the study of the influence of light intensity and the use of alternative sources of nitrogen and carbon on the growth of Spirulina maxima, as well as on the influence on the productivity of biomass and biocompounds. There are few studies in the literature focused on the phycocyanin production from microalgae, justifying the need to deepen the subject.