Search results

The aim of this paper is to investigate the onset of bio‐thermal convection in a shallow fluid layer; the convection is thus driven by the combined effect of swimming of oxytactic microorganisms and inclined temperature gradient.

Linear stability analysis of the basic state is performed; the numerical problem is solved using the collocation method.

The most interesting outcome of this analysis is the correlation between three Rayleigh numbers, two traditional, “thermal” Rayleigh numbers, which are associated with the vertical and horizontal temperature gradients in the fluid layer, and the bioconvection Rayleigh number, which is associated with the density variation induced by the upswimming of microorganisms.

Further research should address the application of weakly nonlinear analysis to this problem.

The increase of the horizontal thermal Rayleigh number stabilizes the basic flow. The effect of increasing the horizontal thermal Rayleigh number is to distort the basic temperature profile away from the linear one. The increase of the Schmidt number stabilizes the basic flow. The increase of the Prandtl number first causes the bioconvection Rayleigh number to decrease and then to increase.

To the best of the authors’ knowledge, this is the first research dealing with the effect of inclined temperature gradient on the stability of bioconvection.

The purpose of this paper is to study the steady biomagnetic hybrid nanofluid (HNF) of oxytactic microorganisms taking place over a thin needle with a magnetic field using the modified Buongiorno’s nanoliquid model.

On applying the appropriate similarity transformations, the governing partial differential equations were transformed into a set of ordinary differential equations. These equations have been then solved numerically using Runge–Kutta–Fehlberg method of fourth–fifth order programming in MAPLE software. Features of the velocity profiles, temperature distribution, reduced skin friction coefficient, reduced Nusselt number and microorganisms’ flux, for different values of the governing parameters were analyzed and discussed.

It was observed that as the needle thickness and solid volume fraction increase, the temperature rises, but the velocity field decreases. For a higher Peclet number, the motile microorganism curve increases, and for a higher Schmidt number, the concentration curve rises.

On applying the modified Buongiorno’s model, the present results are original and new for the study of HNF flow and heat transfer past a permeable thin needle.

According to the previous research, bioconvection has been recognized as an important mechanism in current engineering and environmental systems. For example, researchers exploit this mechanism in modern green bioengineering to develop environmentally friendly fuels, fuel cells and photosynthetic microorganisms. This study aims to analyse how this type of convection affects the flow behaviour and heat transfer performance of mixed convection stagnation point flow in alumina-copper/water hybrid nanofluid. Also, the impact of a modified magnetic field on the boundary layer flow is considered.

By applying appropriate transformations, the multivariable differential equations are transformed into a specific sort of ordinary differential equations. Using the bvp4c procedure, the adjusted mathematical model is revealed. Once sufficient assumptions are provided, multiple solutions are able to be produced.

The skin friction coefficient is declined when the nanoparticle concentration is increased in the opposing flow. In contrast, the inclusion of aligned angles displays an upward trend in heat transfer performance. The presence of several solutions is established, which simply leads to a stability analysis, hence verifies the viability of the initial solution.

The current findings are unique and novel for the investigation of mixed bioconvection flow towards a vertical flat plate in a base fluid with the presence of hybrid nanoparticles.

The purpose of this paper is to investigate the stability of a suspension containing both gyrotactic and oxytactic microorganisms for the case when the suspension occupies a horizontal layer of finite depth. The lower boundary of the layer is assumed rigid while at the upper boundary both situations of rigid and stress‐free boundary conditions are considered.

Linear instability analysis is utilized, and the obtained eigenvalue problem is solved analytically using a one‐term Galerkin method.

The obtained eigenvalue equation relates three Rayleigh numbers, the traditional thermal Rayleigh number and two bioconvection Rayleigh numbers, for gyrotactic and oxytactic microorganisms.

Only the case of non‐oscillatory instability (which always occurs when heating from the bottom is considered) is analyzed. Further experimental research is needed to elucidate possible interaction between gyrotactic and oxytactic microorganisms. The developed theory is applicable only for dilute suspensions.

This paper extends the traditional theory of bio‐thermal convection to the case when the suspension contains two types of motile microorganisms exhibiting different behaviors.

A parabolic trough solar collector is an advanced concentrated solar power technology that significantly captures radiant energy. Solar power will help different sectors reach their energy needs in areas where traditional fuels are in use. This study aims to examine the sensitivity analysis for optimizing the heat transfer and entropy generation in the Jeffrey magnetohydrodynamic hybrid nanofluid flow under the influence of motile gyrotactic microorganisms with solar radiation in the parabolic trough solar collectors. The influences of viscous dissipation and Ohmic heating are also considered in this investigation.

Governing partial differential equations are derived via boundary layer assumptions and nondimensionalized with the help of suitable similarity transformations. The resulting higher-order coupled ordinary differential equations are numerically investigated using the Runga-Kutta fourth-order numerical approach with the shooting technique in the computational MATLAB tool.

The numerical outcomes of influential parameters are presented graphically for velocity, temperature, entropy generation, Bejan number, drag coefficient and Nusselt number. It is observed that escalating the values of melting heat parameter and the Prandl number enhances the Nusselt number, while reverse effect is observed with an enhancement in the magnetic field parameter and bioconvection Lewis number. Increasing the magnetic field and bioconvection diffusion parameter improves the entropy and Bejan number.

Nanotechnology has captured the interest of researchers due to its engrossing performance and wide range of applications in heat transfer and solar energy storage. There are numerous advantages of hybrid nanofluids over traditional heat transfer fluids. In addition, the upswing suspension of the motile gyrotactic microorganisms improves the hybrid nanofluid stability, enhancing the performance of the solar collector. The use of solar energy reduces the industry’s dependency on fossil fuels.

The current paper investigates the bioconvective third-grade nanofluid flow containing gyrotactic organisms with Copper-blood nanoparticles in permeable walls.

The equations governing the flow are solved by adopting the Adomian decomposition method.

The results show that the biconvection Peclet number decreases the density of motile microorganisms, and the Rayleigh number also decreases the velocity profile.

The present study can be applied to design the higher generation microsystems.

To the best of the authors’ knowledge, no such investigation has been carried out in the literature.

The purpose of this study is to investigate the interaction between magnetotactic bacteria and Fe₃O₄–water nanofluid (NF) in a wavy enclosure in the presence of 2D natural convection flow.

Uniform magnetic field (MF), Brownian and thermophoresis effects are also contemplated. The dimensionless, time-dependent equations are governed by stream function, vorticity, energy, nanoparticle concentration and number of bacteria. Radial basis function-based finite difference method for the space derivatives and the second-order backward differentiation formula for the time derivatives are performed. Numerical outputs in view of isolines as well as average Nusselt number, average Sherwood number and flux density of microorganisms are presented.

Convective mass transfer rises if any of Lewis number, Peclet number, Rayleigh number, bioconvection Rayleigh number and Brownian motion parameter increases, and the flux density of microorganisms is an increasing function of Rayleigh number, bioconvection Rayleigh number, Peclet number, Brownian and thermophoresis parameters. The rise in buoyancy ratio parameter between 0.1 and 1 and the rise in Hartmann number between 0 and 50 reduce all outputs average Nusselt, average Sherwood numbers and flux density of microorganisms.

This study implies the importance of the presence of magnetotactic bacteria and magnetite nanoparticles inside a host fluid in view of heat transfer and fluid flow. The limitation is to check the efficiency on numerical aspect. Experimental observations would be more effective.

In practical point of view, in a heat transfer and fluid flow system involving magnetite nanoparticles, the inclusion of magnetotactic bacteria and MF effect provide control over fluid flow and heat transfer.

This is a scientific study. However, this idea may be extended to sustainable energy or biofuel studies, too. This means that a better world may create better social environment between people.

The presence of magnetotactic bacteria inside a Fe₃O₄–water NF under the effect of a MF is a good controller on fluid flow and heat transfer. Since the magnetotactic bacteria is fed by nanoparticles Fe₃O₄ which has strong magnetic property, varying nanoparticle concentration and Brownian and thermophoresis effects are first considered.

Whilst a modest number of investigations have been undertaken concerning nanofluids (NFs), the exploration of fluid flow under exponentially stretching velocities using NFs remains comparatively uncharted territory. This work presents a distinctive contribution through the comprehensive examination of heat and mass transfer phenomena in the NF ND–Cu/H₂O under the influence of an exponentially stretching velocity. Moreover, the investigation delves into the intriguing interplay of gyrotactic microorganisms and convective boundary conditions within the system.

Similarity transformations have been used on PDEs to convert them into dimensionless ODEs. The solution is derived by using the homotopy analysis method (HAM). The pictorial notations have been prepared for sundry flow parameters. Furthermore, some engineering quantities are calculated in terms of the density of motile microbes, Nusselt and Sherwood numbers and skin friction, which are presented in tabular form.

The mixed convection effect associated with the combined effect of the buoyancy ratio, bioconvection Rayleigh constant and the resistivity due to the magnetization property gives rise to attenuating the velocity distribution significantly in the case of hybrid nanoliquid. The parameters involved in the profile of motile microorganisms attenuate the profile significantly.

The current simulations have uncovered fascinating discoveries about how metallic NFs behave near a stretched surface. These insights give us valuable information about the characteristics of the boundary layer close to the surface under exponential stretching.

The novelty of the current investigation is the analysis of NF ND–Cu/H₂O along with an exponentially stretching velocity in a system with gyrotactic microorganisms. The investigation of fluid flow at an exponentially stretching velocity using NFs is still relatively unexplored.

An increment in energy efficiency by employing nanoparticles is a hot topic of research in present era due to its abundant implications in modern engineering and technological processes. Therefore, the current research analysis reported the viscoelastic nanofluid flow over porous oscillatory moving sheet in the presence of microorganisms. A rate-type fluid namely Maxwell fluid is employed with the addition of nanoparticles. The paper aims to discuss this issue.

First, acceptable dimensionless variables are defined to convert the system of dimensional form into the system of dimensionless forms. Later on, the self-similar solution of the boundary value problem is computed by using the homotopy analysis method. The obtained results of velocity, temperature, mass concentration and motile microorganism density profiles are interpreted through physical background.

The presence of both thermophoresis and Brownian motion parameters also improve the thermophysical features of non-Newtonian nanoparticles. It is also pointed out that the presence of porous medium and magnetic force enhances the nanoparticles concentration. Moreover, a weaker distribution of gyrotactic microorganism has been depicted with Peclet number and bioconvection Lewis parameter.

No such article exists in the literature yet.

The purpose of this study is to discuss the Darcy–Forchheimer nanoliquid bio-convection flow by stretching cylinder/plate with modified heat and mass fluxes, activation energy and gyrotactic motile microorganism features.

The proposed flow model is based on flow rate, temperature of nanomaterials, volume fraction of nanoparticles and gyrotactic motile microorganisms. Heat and mass transport of nanoliquid is captured by the usage of popular Buongiorno relation, which allows us to evaluate novel characteristics of thermophoresis diffusion and Brownian movement. Additionally, Wu’s slip (second-order slip) mechanisms with double stratification are incorporated. For numerical and graphical results, the built-in bvp4c technique in computational software MATLAB along with shooting technique is used.

The influence of key elements is illustrated pictorially. Velocity decays for higher magnitude of first- and second-order velocity slips and bioconvection Rayleigh number. The velocity of fluid has an inverse relation with mixed convection parameter and local inertia coefficient. Temperature field enhances with the increase in estimation of thermal stratification Biot number and radiation parameter. A similar situation for concentration field is observed for mixed convection parameter and concentration relaxation parameter. Microorganism concentration profile decreases for higher values of bioconvection Lewis number and Peclet number. A detail discussion is given to see how the graphical aspects justify the physical ones.

To the best of the authors’ knowledge, original research work is not yet available in existing literature.