Search results

This paper aims to achieve an optimum flow separation control over the airfoil using a passive flow control method by introducing a bio-inspired nose near the leading edge of the National Advisory Committee for Aeronautics (NACA) 4 and 6 series airfoil. In addition, to find the optimised leading edge nose design for NACA 4 and 6 series airfoils for flow separation control.

Different bio-inspired noses that are inspired by the cetacean species have been analysed for different NACA 4 and 6 series airfoils. Bio-inspired nose with different nose length, nose depth and nose circle diameter have been analysed on airfoils with different thicknesses, camber and camber locations to understand the aerodynamic flow properties such as vortex formation, flow separation, aerodynamic efficiency and moment.

The porpoise nose design that has a leading edge with depth = 2.25% of chord, length = 0.75% of chord and nose diameter = 2% of chord, delays the flow separation and improves the aerodynamic efficiency. Average increments of 5.5% to 6° in the lift values and decrements in parasitic drag (without affecting the pitching moment) for all the NACA 4 and 6 series airfoils were observed irrespective of airfoil geometry such as different thicknesses, camber and camber location.

The two-dimensional computational analysis is done for different NACA 4 and 6 series airfoils at low subsonic speed.

This design improves aerodynamic performance and increases the structural strength of the aircraft wing compared to other conventional high lift devices and flow control devices. This universal leading edge flow control device can be adapted to aircraft wings incorporated with any NACA 4 and 6 series airfoil.

The results would be of significant interest in the fields of aircraft design and wind turbine design, lowering the cost of energy and air travel for social benefits.

Different bio-inspired nose designs that are inspired by the cetacean species have been analysed for NACA 4 and 6 series airfoils and universal optimum nose design (porpoise airfoil) is found for NACA 4 and 6 series airfoils.

The purpose of this paper is to achieve an optimum flow separation control over the airfoil using passive flow control method by introducing bio-inspired nose near the leading edge of the NACA 2412 airfoil.

Two distinguished methods have been implemented on the leading edge of the airfoil: forward facing step, which induces multiple accelerations at low angle of attack, and cavity/backward facing step, which creates recirculating region (axial vortices) at high angle of attack.

The porpoise airfoil (optimum bio-inspired nose airfoil) delays the flow separation and improves the aerodynamic efficiency by increasing the lift and decreasing the parasitic drag. The maximum increase in aerodynamic efficiency is 22.4 per cent, with an average increase of 8.6 per cent at all angles of attack.

The computational analysis has been done for NACA 2412 airfoil at low subsonic speed.

This design improves the aerodynamic performance and increases structural strength of the aircraft wing compared to other conventional high-lift devices and flow-control devices.

Different bio-inspired nose designs which are inspired by the cetacean species have been analysed for NACA 2412 airfoil, and optimum nose design (porpoise airfoil) has been found.

The high lift devices are effective at high angle of attack to increase the coefficient of lift by increasing the camber. But it affects the low angle of attack aerodynamic performance by increasing the drag. Hence, they have made as a movable device to deploy only at high angles of attack, which increases the design and installation complexities. This study aims to focus on the comparison of aerodynamic efficiency of different conventional leading edge (LE) slat configurations with simple fixed bioinspired slat design.

This research analyzes the effect of LE slat on aerodynamic performance of CLARK Y airfoil at low and high angles of attack. Different geometrical parameters such as slat chord, cutoff, gap, width and depth of LE slat have been considered for the analysis.

It has been found that the LE slat configuration with slat chord 30% of airfoil chord, forward extension 8% of chord, dip 3% of chord and gap 0.75% of chord gives higher aerodynamic efficiency (C_l/Cd) than other LE slat configurations, but it affects the low angles of attack aerodynamic performance with the deployed condition. Hence, this optimum slat configuration is further modified by closing the gap between LE slat and the main airfoil, which is inspired by the marine mammal’s nose. Thus increases the coefficient of lift at high angles of attack due to better acceleration over the airfoil nose and as well enhances the aerodynamic efficiency at low angles of attack.

The two-dimensional computational analysis has been done for different LE slat’s geometrical parameters at low subsonic speed.

This bio-inspired nose design improves aerodynamic performance and increases the structural strength of aircraft wing compared to the conventional LE slat. This fixed design avoids the complex design and installation difficulties of conventional movable slats.

The findings will have significant impact on the fields of aircraft wing and wind turbine designs, which reduces the design and manufacturing complexities.

Different conventional slat configurations have been analyzed and compared with a simple fixed bioinspired slat nose design at low subsonic speed.

This paper aims to model the aerodynamic flow characteristics of NACA0010 for various angle of attacks including stall for incompressible flows using panel methods. This paper also aims to quantify the surface pressure distribution on streamlined bodies and validate the results with analytical Jukouwski method and inverse panel methods that can predict the aerodynamic flow behaviour using the geometric iteration approach.

The 2 D panel method was implemented in Qblade software v.06 which uses the fundamental panel method which rely on source strengths and influence coefficients to determine the velocity and pressure fields on the surface. The software implements the boundary layer or viscous effects to determine the influence on aerodynamic performance at various angles of attack. Jukouwski method is also evaluated for predicting aerodynamic characteristics and is based on the geometric iteration approach. Then complex aerodynamic flow potentials are determined based on the source strengths which are used to predict the pressure and velocity fields.

At low to moderate angles of attack, panel and Jukouwski methods predict similar results for surface pressure coefficients comparable to Hess and Smith inverse method. In comparison to panel method, results from the Jukouwski mapping method predicted the pressure coefficient conservatively for the same free stream conditions. With increase in Reynolds number, lift coefficient and aerodynamic performance improved significantly for un-tripped aerofoil when stall angle is approached when compared to tripped aerofoil.

This study demonstrated that panel methods have higher efficacy in terms of computational time or resources and thus can provide benefits to many real-world aircraft or aerospace design applications.

Even though panel and Jukouwski methods have been studied extensively in the past, this paper demonstrates the efficacy of both methods for modelling aerodynamic flows that range between moderate to high Reynolds number which are critical for many aircraft applications. Both methods have been validated with analytical and inverse design methods which are able to predict aerodynamic flow characteristics for simple bluff bodies, streamlined aerofoils as well as bio-inspired corrugated aerofoils.

The purpose of this study illustrates the morphing effects around a large-scale high-lift configuration of the Airbus A320 with two elements airfoil-flap in the take-off position. The flow around the airfoil-flap and the near wake are analysed in the static case and under time-dependent vibration of the flap trailing-edge known as the dynamic morphing.

Experimental results obtained in the subsonic wind tunnel S1 of Institut de Mécanique des Fluides de Toulouse of a single wing are discussed with high-fidelity numerical results obtained by using the Navier–Stokes multi-block (NSMB) code with advanced turbulent modelling able to capture the predominant instabilities and coherent structure dynamics. An explanation of the dynamic time-dependent grid deformation is provided, which is used in the NSMB code to simulate the flap’s trailing-edge deformation in the morphing configuration. Finally, power spectral density is performed to reveal the coherent wake structures and their modification because of the morphing.

Frequency of vibration and amplitude of deformation effects are investigated for different morphing cases. Optimal morphing regions at a specific frequency and a slight deformation were able to attenuate the predominant natural shear-layer frequency and to considerably decrease the width of the von Kármán vortices with a simultaneous increase of aerodynamic performances.

The new concept of future morphed wings is proposed for a large scale A320 prototype at the take-off position. The dynamic morphing of the flap’s trailing-edge is simulated for the first time for high-lift two-element configuration. In addition, the wake analysis performed helped to show the turbulent structures according to the organised eddy simulation model.

Biomimetic study existing natural biological elements to produce engineering products with similar performance and abilities. The purpose of this paper is to highlight biomimetic studies to produce a new type of airplanes: adding remiges, bending ability and flapping mechanisms.

The used methodology was to thoroughly investigate the literature, to define the proper endurance and fatigue parameters, to perform a series of numerical studies and report improvement percentages relevant to defined parameters.

By adding remiges and the bending mechanism, the authors managed to reach – numerically – the preset desired structure goal. Efficiency increased using remiges with less drag force. In addition, with the help of the bending wing technique, the drag force was improved. The flapping mechanism showed high vibration rates. Last but not least, applying multiple winglets gave a better optimization of the endurance parameter.

Research is conducted at a university without any research facilities. No laboratories exist, and acquiring research papers is mostly difficult and costly.

The research study is original in the sense of its numerical investigation. Proposing biomimetic was at the heart of the airplane invention and cannot be stated as an original contribution. Rather the field has been recently abandoned, and performing this major literature review can be considered as original in a sense it summarizes recent to somewhat old advancement.

Nowadays flaps and winglets are one of the main mechanisms to increase airfoil efficiency. This study aims to investigate the power performance of vertical axis wind turbines (VAWT) that are equipped with diverse gurney flaps. This study could play a crucial role in the design of the VAWT in the future.

In this paper, the two-dimensional computational fluid dynamics simulation is used. The second-order finite volume method is used for the discretization of the governing equations.

The results show that the gurney flap enhances the power coefficient at the low range of tip speed ratio (TSR). When an angled and standard gurney flap case has the same aerodynamic performance, an angled gurney flap case has a lower hinge moment on the junction of airfoil and gurney flap which shows the structural excellence of this case. In all gurney flap cases, the power coefficient increases by an average of 20% at the TSR range of 0.6 to 1.8. The gurney flap cases do not perform well at the high TSR range and the results show a lower amount of power coefficient compare to the clean airfoil.

The angled gurney flap which has the structural advantage and is deployed to the pressure side of the airfoil improves the efficiency of VAWT at the low and medium range of TSR. This study recommends using a controllable gurney flap which could be deployed at a certain amount of TSR.

Flow separation on wings, blades and vehicles can be delayed or even suppressed by the use of vortex generators (VG). Numerous studies, documented in the literature, extensively describe the performance of triangular and rectangular VG winglets. This paper aims to focus on the use of non-conventional VG shapes, more specifically an array of trapezoildal-perforated VG tabs.

In this study, computational fluid dynamic simulations are performed on an inline array of trapezoidal VG with various dimensions and inclination angles, in addition to considering perforations in the VG centers. The methodology of the present numerical study is validated with experimental data from the literature.

The performance and the associated flow structures of these tested non-conventional VG are compared to classical triangular winglets. For the proposed non-conventional trapezoidal VG, at the onset of stall, a 21% increase of lift over drag on the airfoil is observed. The trapezoidal VG enhancement is also witnessed during stall where the lift over drag ratio is increased by 120% for the airfoil and by 10% with respect to the triangular winglets documented in the literature.

The originality of this paper is the use of non-conventional vortex generator shape to enhance lift over drag coefficient using three-dimensional numerical simulations.

This paper aims to propose a novel design concept for a biomimetic dolphin-like underwater glider, which can offer the advantages of both robotic dolphins and underwater gliders to achieve high-maneuverability, high-speed and long-distance motions.

To testify the gliding capability of dolphin-like robot without traditional internal movable masses, the authors first developed a skilled and simple dolphin-like prototype with only gliding capability. The hydrodynamic coefficients, including lift, drag and pitching moment, are obtained through computational fluid dynamics method, and the hydrodynamic analysis in the steady gliding motion is also executed.

Experimental results have shown that the dolphin-like glider could successfully glide depending on the pitching torques only from buoyancy-driven system and controllable fins without traditional internal moveable masses.

A hybrid underwater glider scheme that combines robotic dolphin and glider is firstly proposed, shedding light on the creation of innovation gliders with maneuverability and durability.