Search results

1 – 10 of over 4000
Article
Publication date: 1 October 1996

Bill Wilson

Provides a brief history of Glacier Vandervell Europe. Describes the range of new materials developed, which are manufactured alongside the more traditional materials. The range…

Abstract

Provides a brief history of Glacier Vandervell Europe. Describes the range of new materials developed, which are manufactured alongside the more traditional materials. The range includes copper lead and lead bronze, aluminium‐based materials and polymer bearings. Details further research taking place into interactions between components in the bearing system. Summarizes the testing processes at the new laboratory in Kilmarnock.

Details

Industrial Lubrication and Tribology, vol. 48 no. 5
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 1 February 1997

Bill Wilson

Gives the results of trials conducted in China which show the use of top‐grade, low smoke, part synthetic two‐stroke oil gives better performance and four times longer engine life…

2099

Abstract

Gives the results of trials conducted in China which show the use of top‐grade, low smoke, part synthetic two‐stroke oil gives better performance and four times longer engine life than the four‐stroke engine oils generally used to lubricate two‐stroke engines in China. Sets out existing and proposed international standards for two‐stroke engine oils.

Details

Industrial Lubrication and Tribology, vol. 49 no. 1
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 1 April 1996

Bill Wilson

Reports in improvements in the gear industry since 1993, and provides details of six projects carried out by the British Gear Association and the Gear Research Foundation. Briefly…

2242

Abstract

Reports in improvements in the gear industry since 1993, and provides details of six projects carried out by the British Gear Association and the Gear Research Foundation. Briefly discusses the Navy and Vickers Gear Research Association research and the work of the Technical Committee. Finally discusses marketing strategy for Germany and Italy.

Details

Industrial Lubrication and Tribology, vol. 48 no. 2
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 1 June 1996

Bill Wilson

Provides a brief summary of the use of CFCs and HCFCs in general and marine refrigeration, and the ban on the use of CFCs. Discusses alternative refrigerants, and their advantages…

608

Abstract

Provides a brief summary of the use of CFCs and HCFCs in general and marine refrigeration, and the ban on the use of CFCs. Discusses alternative refrigerants, and their advantages and disadvantages. Reviews refrigeration compressor lubrication and recent developments.

Details

Industrial Lubrication and Tribology, vol. 48 no. 3
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 1 February 1996

Bill Wilson

Examines the issues surrounding fuel lubricity by explaining the background to the problems surrounding lubricity in diesel engines. As the need for low sulphur diesels arose it…

235

Abstract

Examines the issues surrounding fuel lubricity by explaining the background to the problems surrounding lubricity in diesel engines. As the need for low sulphur diesels arose it became clear that a universally accepted bench test was required and ISO working group SC7/WG6 was set up in 1992 to decide on a standard test. The group recommended that an HFRR (high frequency reciprocating rig) ball‐on‐flat test should be adopted. Describes the test methodology.

Details

Industrial Lubrication and Tribology, vol. 48 no. 1
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 1 April 1996

Bill Wilson

Describes various exhibits at the Coach and Bus 1995 exhibition. Discusses the development of liquid petroleum gas run vehicles, their benefits (reduced noise and pollution) and…

2084

Abstract

Describes various exhibits at the Coach and Bus 1995 exhibition. Discusses the development of liquid petroleum gas run vehicles, their benefits (reduced noise and pollution) and problems. Provides details of emission regulations for vehicles.

Details

Industrial Lubrication and Tribology, vol. 48 no. 2
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 1 December 1996

Bill Wilson

Outlines the various testing procedures carried out by BICERI, including engine fuel and lubricant testing. Describes the universal wear machine, and explains the three test…

Abstract

Outlines the various testing procedures carried out by BICERI, including engine fuel and lubricant testing. Describes the universal wear machine, and explains the three test modes: pin‐on disc, block‐on‐ring and pin‐on‐reciprocating plate.

Details

Industrial Lubrication and Tribology, vol. 48 no. 6
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 1 February 1996

Bill Wilson

Outlines the history of the specialist lubrication group of the Institution of Mechanical Engineers – which was originally called the Lubrication Group and is now the Tribology…

157

Abstract

Outlines the history of the specialist lubrication group of the Institution of Mechanical Engineers – which was originally called the Lubrication Group and is now the Tribology Group. Describes how the organization was formed and lists its achievements, special activities and publications. Concludes by looking to the future, stating that the group has developed a dynamic five‐year plan to take it into the next century.

Details

Industrial Lubrication and Tribology, vol. 48 no. 1
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 1 December 1997

Bill Wilson

Discusses the properties of various asbestos‐free gasket materials, in particular expanded PTFE. Presents the factors which need to be taken into account when choosing a gasket…

Abstract

Discusses the properties of various asbestos‐free gasket materials, in particular expanded PTFE. Presents the factors which need to be taken into account when choosing a gasket. Highlights the requirements of gaskets in the automotive industry and the conditions they have to withstand.

Details

Industrial Lubrication and Tribology, vol. 49 no. 6
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 1 August 1997

Bill Wilson

Defines the four main routes for reclaiming used oils ‐ recovery as fuel; reconditioning on site; oil laundering and re‐refining. Places used oil re‐refining in its historical…

1080

Abstract

Defines the four main routes for reclaiming used oils ‐ recovery as fuel; reconditioning on site; oil laundering and re‐refining. Places used oil re‐refining in its historical context and presents profiles of the (only) two used‐oil re‐refiners in the UK.

Details

Industrial Lubrication and Tribology, vol. 49 no. 4
Type: Research Article
ISSN: 0036-8792

Keywords

1 – 10 of over 4000