Search results

To run a job guarantee public policy scheme, it is important to know the aspiration level or the reference point of labor, and accordingly, the labor hour and the wage sequence are to be prepared. The existing job guarantee schemes consider the same wage rates for all types of jobs. As a result, it is to identify the reference point. The present work aims to propose a job guarantee scheme where different types of jobs have different wage rates. The paper explains the choice problem between labor and leisure at different wage rates and proposes complete computational tools to be incorporated into the job guarantee schemes. The paper also gives a mechanism to prepare the list of jobs and corresponding wage rates by maintaining a balance between labor and leisure, where productive activities measure labor hours and labor welfare measures leisure hours. Lastly, the paper provides the analytical tools to interpret the ex-post data of the job guarantee public policy schemes.

The paper has been written based on the Coordination Game and its Welfare Implications in the job guarantee public policy schemes.

The present paper gives an initial work to measure the choice between labor and leisure for the different wage rates practically. This will help in getting the equilibrium strategies, namely, the combination of the labor hour and the wage rate between the policymaker and the labor. This method will help to implement the job guarantee schemes. For example, to run successfully the Basic Income policy, the basic income calculation should give due care; otherwise, there will be a downward trend in the basic income and the welfare of labor will be reduced, because the labor would have to supply excess labor to meet the target income.

This paper derives theories and explains how the equilibrium in this coordination game can be achieved. The paper explains how the policy of the job guarantee schemes can be practiced practically. In the MGNREGA scheme, the public institution declares different categories of jobs with different wage rates. The categories have been classified with respect to the hours required to complete the job. Therefore, the public institution declares different lists or a sequence of pairs of labor hours and wage rates. Moreover, the list is stochastic, because the list can be changed by the inclusion of an offer from the market as well. The labor has to select from the list. The challenge on the part of the public institution is to prepare the list in such a way so that the inclusion of the market offers will not distort the equilibrium of the coordination game. An important method has been proposed here to analyze the ex-post data of job offers so that the preparation of the future sequence of the job offers can be prepared with due care. One objective of the policymaker here is to make a list of job offers in such a way so that the labor supply will be converging to a point and that will not deviate if the wage rate increases further. This objective will make a balance of the distribution of funds between the existing registered labor and the new entrants into the job guarantee schemes.

This research examines what motivates professional truck drivers to engage in eco-driving by linking their self-reports with objective driving scores.

Theory of Planned Behavior (TPB) is illustrated in an embedded, single-case study of a Finnish carrier with 17 of its truck drivers. Data are obtained through in-depth interviews with drivers, their fuel-efficiency scores generated by fleet telematics and a focus group session with the management.

Discrepancies between drivers’ intentions and eco-driving behaviors are illustrated in a two-by-two matrix that classifies drivers into four categories: ideal eco-drivers, wildcards, wannabes and non-eco-drivers. Attitudes, subjective norms and perceived behavioral control are examined for drivers within each category, revealing that drivers’ perceptions did not always align with the reality of their driving.

This study strengthens the utility of TPB through data triangulation while also revealing the theory’s inherent limitations in elucidating the underlying causes of its three antecedents and their impact on the variance in driving behaviors.

Managerial insights are offered to fleet managers and eco-driving solution providers to stipulate the right conditions for drivers to enhance fuel-efficiency outcomes of transport fleets.

This is one of the first studies to give a voice to professional truck drivers about their daily eco-driving practice.

This study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when incorporated into the nonpolar ethylene propylene diene (EPDFM) rubber matrix, focusing on its reinforcing and antioxidant effect on the resulting EPDM composites.

The structure of the prepared EPDM composites was confirmed by Fourier-transform infrared spectroscopy, and the dispersion of the additive fillers and antioxidants in the EPDM matrix was investigated using scanning electron microscopy. Also, the rheometric characteristics, mechanical properties, swelling behavior and thermal gravimetric analysis of all the prepared EPDM composites were explored as well.

Results revealed that the Cu-LSF complex dispersed well in the nonpolar EPDM rubber matrix, in thepresence of coupling system, with enhanced Cu-LSF-rubber interactions and increased cross-linking density, which reflected on the improved rheological and mechanical properties of the resulting EPDM composites. From the various investigations performed in the current study, the authors can suggest 7–11 phr is the optimal effective concentration of Cu-LSF complex loading. Interestingly, EPDM composites containing Cu-LSF complex showed better antiaging performance, thermal stability and fluid resistance, when compared with those containing the commercial antioxidants (2,2,4-trimethyl-1,2-dihydroquinoline and N-isopropyl-N’-phenyl-p-phenylenediamine). These findings are in good agreement with our previous study on polar nitrile butadiene rubber.

The current study suggests the green biomass-derived Cu-LSF complex to be a promising low-cost and environmentally safe alternative filler and antioxidant to the hazardous commercial ones.

This study aims to investigate the fatigue crack propagation behavior of SiC particle-reinforced 2124 Al alloy composites under constant amplitude axial loading at a stress ratio of R = 0.1. For this purpose, it is performed experiments and comparatively analyze the results by producing 5, 10, 15 Vol.% SiCp-reinforced composites and unreinforced 2124 Al alloy billets with powder metallurgy (PM) production technique.

With the PM production technique, SiCp-reinforced composite and unreinforced 2124 Al alloy billets were produced at 5%, 10%, 15% volume ratios. After the produced billets were extruded and 5 mm thick plates were formed, tensile and fatigue crack propagation compact tensile (CT) samples were prepared. Optical microscope examinations were carried out to determine the microstructural properties of billet and samples. To determine the SiC particle–matrix interactions due to the composite microstructure, unlike the Al alloy, which affects the crack initiation life and crack propagation rate, detailed scanning electron microscopy (SEM) studies have been carried out.

Optical microscope examinations for the determination of the microstructural properties of billet and samples showed that although SiC particles were rarely clustered in the Al alloy matrix, they were generally homogeneously dispersed. Fatigue crack propagation rates were determined experimentally. While the highest crack initiation resistance was achieved at 5% SiC volume ratio, the slowest crack propagation rate in the stable crack propagation region was found in the unreinforced 2124 Al alloy. At volume ratios greater than 5%, the number of crack initiation cycles decreases and the propagation rate increases.

As a requirement of damage tolerance design, the fatigue crack propagation rate and fatigue behavior of materials to be used in high-tech vehicles such as aircraft structural parts should be well characterized. Therefore, safer use of these materials in critical structural parts becomes widespread. In this study, besides measuring fatigue crack propagation rates, the mechanisms causing crack acceleration or deceleration were determined by applying detailed SEM examinations.

The conflicting results on the corrosion characteristics of aluminium matrix composites reinforced with agrarian waste have stimulated an investigation on the hardness and corrosion rate of sugar palm fibre ash (SPFA) reinforced LM26 Al/alloy composite by varying the SPFA from 0 to 10 wt% in an interval of 2 wt%. This paper aims to discuss the aforementioned issue.

The composites were produced via stir-casting and the hardness was determined using a Vickers hardness testing machine, corrosion rate was examined through the weight loss method by immersion in 0.5, 1.0 and 1.5 M hydrochloric acid (HCl) at temperatures of 303, 318, and 333 K for the maximum duration of 120 h. The morphological study was conducted using a scanning electron microscope (SEM) on the samples before and after immersion in HCl.

The incorporation of SPFA improved the hardness of the alloy from 58.22 to 93.62 VH after 10 wt% addition. The corrosion rate increases with increased content of SPFA, the concentration of HCl and temperature. The least corrosion rate of 0.0272 mpy was observed for the LM26 Al alloy in 0.5 M after 24 h while the highest corrosion rate of 0.8511 mpy was recorded for LM26 Al/10 wt% SPFA in 1.5 M HCl acid after 120 h. The SEM image of corroded samples revealed an increased number of pits with increased SPFA content.

The work is limited to SPFA up to 10 wt% as reinforcement in LM26 Al alloy, the use of HCl as corrosion medium, temperatures in the range of 303–333 K, and a weight loss method were used to evaluate the corrosion rate.

The corrosion rate was determined for LM26 Al/SPFA composites with various amounts of SPFA in 0.5, 1.0 and 1.5 M HCl at 303, 318 and 333 K and compared with the matrix alloy.

The purpose of this paper is to examine the mechanical characteristics and optimization of wear parameters of hybrid (TiO₂ + Y₂O₃) nanoparticles with Al matrix using squeeze casting technique.

The hybrid aluminium matrix nanocomposites (HAMNCs) were fabricated with varying concentrations of titanium oxide (TiO₂) and yttrium oxide (Y₂O₃), from 2.5 to 10 Wt.% in 2.5 Wt.% increments. Dry sliding wear test variables were optimized using the Taguchi method.

The introduction of hybrid nanoparticles in the aluminium (Al) matrix was evenly distributed in contrast to the base matrix. HAMNC6 (5 Wt.% TiO₂ + 5 Wt.% Y₂O₃) reported the maximum enhancement in mechanical properties (tensile strength, flexural strength, impact strength and density) and decrease in porosity% and elongation% among other HAMNCs. The results showed that the optimal combination of parameters to achieve the lowest wear rate was A3B3C1, or 15 N load, 1.5 m/s sliding velocity and 200 m sliding distance. The sliding distance showed the greatest effect on the dry sliding wear rate of HAMNC6 followed by applied load and sliding velocity. The fractured surfaces of the tensile sample showed traces of cracking as well as substantial craters with fine dimples and the wear worn surfaces were caused by abrasion, cracks and delamination of HAMNC6.

Squeeze-cast Al-reinforced hybrid (TiO₂+Y₂O₃) nanoparticles have been investigated for their impact on mechanical properties and optimization of wear parameters.

The purpose of this study to find an alternate method to minimize waste i.e., eggshell and rice husk ash. In this paper, eggshell (ES) and rice husk ash (RHA) particles are used as reinforcements for examining their effect on the coefficient of thermal expansion (CTE), grain size (GS) and corrosion behavior for developed composite material.

In this investigation, 5 Wt.% each of ES and RHA reinforcement particles have been introduced. To investigate the microstructures of the developed composite material, scanning electron microscope was used. Physical and mechanical properties of composite material are tensile strength and hardness that have been examined.

The result of this paper shows that number of grains per square inch for composition Al/5% ES/5% RHA composite was found to be 1,243. Minimum value of the volume CTE was found to be 6.67 × 10–6/°C for Al/5% ES/5% RHA composite. The distribution of hard phases of ES particles in metal matrix is responsible for improvements in tensile strength and hardness. These findings demonstrated that using carbonized ES as reinforcement provides superior mechanical and physical properties than using uncarbonized ES particles.

There are several articles examining the impact of varying Wt.% of carbonized ES and rice husk reinforcement on the microstructures and mechanical characteristics of metal composites. CTE, GS and corrosion behavior are among of the features that are examined in this paper.

Despite much attention being devoted to shared leadership, the negotiation of such arrangements remains underexplored. In parallel, the revival of interest in matrix structures reveals their challenges but neglects the dynamics of shared leadership. In this case study, the author analyzes the tensions experienced by senior managers of a healthcare organization transitioning from a hierarchical to matrix structure as they negotiate their leadership roles in this new arrangement.

The author interviewed 16 senior managers, observed their meetings and analyzed documents. These data were combined with secondary data including previous interviews and observations of this top leadership team. The author then conducted an inductive data analysis.

The author's analysis reveals that the tensions experienced by senior managers as they negotiate their roles reflect the co-existence of leadership surpluses (too much leadership) and deficits (too little leadership) in matrix organizations. The author argues that surpluses and deficits are not mutually exclusive but are interrelated and shows how leadership surpluses can create leadership deficits.

The author’s findings suggest that in contexts of leader abundance, actors should explore leadership voids. Particular attention should be paid to incidents of intrusion and exclusion, moments of transition and intense role negotiation, as those contexts are particularly conducive to leadership deficits.

While previous work on matrix structures focuses on leadership surpluses, the author discusses leadership deficits. The author explores how more leaders do not necessarily mean more leadership, but instead how more leaders may result in leadership voids.

Additive manufacturing is a recent technology used in the production of composite materials. The use of continuous fibres as reinforcement is necessary to achieve high mechanical performance. However, making these materials more environmentally friendly is still challenging. The purpose of this study was to investigate the feasibility of 3D printing a composite made of continuous regenerated cellulose fibres using a standard 3D printer generally used for printing polymers.

The production process was based on a pre-impregnated filament made from a tape containing continuous cellulose fibres and Pebax^® matrix. 3D printed composite samples were fabricated using fused deposition modelling. The tape, filament and 3D printed composites were first analysed by means of modulated differential scanning calorimetry and micrography. Tensile tests were then performed, and the mechanical characteristics were determined at each step of the production process. Fracture surfaces were investigated by field-emission gun–scanning electron microscopy.

Results showed that the mechanical behaviour of the material was maintained throughout the production process, and the 3D printed biocomposites had a stiffness equivalent to that of traditionally manufactured continuous cellulose fibre composites. The obtained 3D printed composites showed an increase in strength value by a factor of 4 and in tensile modulus by a factor of 20 compared to those of unreinforced Pebax^® polymer.

This paper demonstrates the feasibility of 3D printing composites based on continuous cellulose fibres, paving the way for new biocomposites made by additive manufacturing.

This paper aims to report the effect of titanium oxide (TiO₂) particles on the physical, mechanical, tribological and water resistance properties of 5% NaOH-treated bamboo fiber–reinforced composites.

In this research, the epoxy/bamboo/TiO₂ hybrid composite filled with 0–8 Wt.% TiO₂ particles has been fabricated using simple hand layup techniques, and testing of the developed composite was done in accordance with the American Society for Testing and Materials (ASTM) standard.

The results of this study indicate that the addition of TiO₂ particles improved the mechanical properties of the developed epoxy/bamboo composites. Tensile properties were found to be maximum for 6 Wt.%, and impact strength was found to be maximum for 8 Wt.% TiO₂ particles-filled composite. The highest flexural properties were found at a lower TiO₂ fraction of 2 Wt.%. Adding TiO₂ filler helped to reduce the water absorption rate. The studies related to the wear and friction behavior of the composite under dry and abrasive wear conditions reveal that TiO₂ filler was beneficial in improving the wear performance of the composite.

This research paper attempts to include both TiO₂ filler and bamboo fibers to develop a novel composite material. TiO₂ micro and nanoparticles are promising filler materials; it helps to enhance the mechanical and tribological properties of the epoxy composites and in literature, there is not much work reported, where TiO₂ is used as a filler material with bamboo fiber–reinforced epoxy composites.