Search results

This study aims to focus on the four user characteristics of innovation diffusion (availability, observability and trialability [AOT], simplicity, relative advantage [RA] and interoperability) to observe their influence on building information modelling (BIM) usage. This study focuses on the Kenyan construction industry, specifically the building contractors.

This study uses purposive sampling and specifically focusses on active construction sites that met requirements needed for BIM usage to thrive. Data was collected manually using questionnaires (N = 62).

This paper contributes to the analysis of the current state of BIM usage by the Kenyan construction industry specifically among building contractors and confirms that Kenya is at the early majority adopters’ stage of diffusion characterised by low BIM usage. In terms of correlation, this study found out that AOT had a strong positive correlation with usage, RA had a moderate positive correlation with usage, simplicity had a weak positive correlation with usage and interoperability had no correlation with usage.

This study gives a clear trend on BIM usage among building contractors to assist potential BIM users make informed decision. The recommendations in this study can be adopted by any late adopter jurisdiction whose structure of the construction industry is similar to Kenya’s.

This paper highlights variables that enable or subdue BIM usage. It goes further to localise and contextualise the barriers for deeper understanding of what makes these barriers be major hindrances towards BIM usage and giving practical solutions to these barriers.

Building information modeling (BIM) is most often used for the construction of new buildings. By using BIM in such projects, collaboration among stakeholders in an architecture, engineering and construction project is improved. To even further improve collaboration, there is a move toward the production and usage of BIM standards in various countries. These are typically national documents, including guides, protocols, and mandatory regulations, that introduce guidelines about what information should be exchanged at what time between which partners and in what formats. If a nation or a construction team agrees on these guidelines, improved collaboration can come about on top of the collaboration benefits induced by the mere usage of BIM. This scenario might also be targeted for interventions in existing buildings. The paper aims to discuss these issues.

In this paper, the authors investigate the general content and usage of existing BIM standards for new constructions, describing specifications about BIM deliverable documents, modeling, and collaboration procedures. The authors suggest to what extent the content in the BIM standards can also be used for interventions in existing buildings. These suggestions rely heavily on literature study, supported by on-site use case experiences.

From this research, the authors can conclude that the existing standards give a solid basis for BIM collaboration in existing building interventions, but that they need to be extended in order to be of better use in any intervention project in an existing building. This extension should happen at: data modeling level: other kinds of data formats need to be considered, coming from terrestrial laser scanning and automatic digital photogrammetry tools; at data exchange level: exchange requirements should take explicit statements about modeling tolerances and levels of (un)certainty; and at process modeling level: business process models should include information exchange processes from the very start of the building survey (BIM→facility management→BIM or regular audit).

BIM environments are not often used to document existing buildings or interventions in existing buildings. The authors propose to improve the situation by using BIM standards and/or guidelines, and the authors give an initial overview of components that should be included in such a standard and/or guideline.

Building information modeling (BIM) is vital in the performance improvement of contracting firms. Thus, there is a need to stimulate its implementation in the construction sector with a view to meeting the competitive demands of the industry. However, there have been very few studies on BIM implementation among contracting firms in Nigeria. Hence, this study aims to examine the current BIM uptake among Nigerian contracting firms, assess the barriers to BIM implementation and examine the ways of improving BIM implementation within these contracting firms.

A questionnaire survey was conducted on contracting firms (comprising small-, medium- and large-sized firms) in Lagos, Nigeria. The obtained data were analyzed using both descriptive and inferential statistics. These included percentage, mean score, standard deviation, the Kruskal–Wallis test and factor analysis.

This study revealed the current state of BIM implementation among contracting firms in Nigeria in terms of their knowledge of BIM, their usage of BIM as well as the BIM software adopted. Furthermore, the study identified 25 barriers to BIM implementation in contracting firms and identified 15 ways to improve BIM implementation in contracting firms. The relative importance of both the identified barriers and the ways for improving BIM implementation was gauged among contracting firms comprising small-, medium- and large-sized firms. The result of the Kruskal–Wallis test revealed that, except for two (out of 25) identified barriers, and one (out of 15) identified ways of improving BIM implementation in contracting firms, there is no significant statistical difference in the perceptions of the three respondents’ groups. The result of the factor analysis categorized the identified 25 barriers into seven main factors.

This study provides empirical evidence on the barriers to BIM implementation and the ways of improving its implementation among contracting firms, thereby providing a better insight of the Nigerian construction industry’s BIM environment.

This study’s findings can positively inform the decisions of construction stakeholders to formulate strategies capable of improving BIM implementation in the construction industry at large.

This paper aims to provide a bibliometric analysis of advances in building information modeling (BIM) research globally. It provides a recent state-of-the-art assessment on trends as it relates to the architecture, engineering and construction (AEC) industry. Being a vastly emerging research area, there is a need for the appraisal of research trends.

A comprehensive bibliometric analysis was conducted using a dual step filtering system on an initial volume of 2347 documents in the first stage between 2010 and 2020, and of 311 publications in the final stage of the analyses which emphasized more on 2015–2020 from the WoS database. Frequency analyses on the sources, affiliations, authors and country/ region of publication were assessed in the first stage of the analyses. Co-authorship and evidence of author collaboration were also examined. The second stage included a co-occurrence keyword network analysis. Further, text mining/mapping of the abstract of the documents was performed.

Emerging trends in the field of BIM research include but are not limited to historical building information modeling (h-BIM) applications, the use of blockchain technology, digital twin, Construction Operations Building information exchange (COBiE), Industry Foundation Classes (IFC), dynamo-bim, energy plus software and BIM laser scanning innovations. The possibility of these innovations solving some current BIM challenges were also discussed.

The study provides an insight into the BIM research trends globally while identifying existing challenges. The study uses text mining of unstructured abstracts, which has not been reported in BIM research.

BIM has much potential to improve the effectiveness of construction works with respect to design, construction and maintenance. However, many Architecture, Engineering, and Construction (AEC) firms are still lagging in the adoption and implementation of BIM in both developing and developed countries. The purpose of this study is to assess the barriers to BIM implementation, and examine the ways forward to improve BIM adoption within the Nigerian AEC firms.

A comprehensive literature review and questionnaire survey were used in the study. The survey targeted four different AEC firms. These include architectural firms, facility management firms, quantity surveying firms and structural engineering firms in Lagos, Nigeria. The data obtained were analyzed using mean score, standard deviation, Kruskal–Wallis test, and factor analysis.

The study identified 20 barriers to BIM implementation and identified ten ways forward to improve BIM adoption in AEC firms, particularly in Nigeria. The relative importance of both the identified barriers and the ways forward were gauged. The Kruskal–Wallis tests revealed that except for one (out of 20) identified barriers, and one (out of 10) identified ways forward; there is no statistical significant difference in the perceptions of four different AEC firms. The factor analysis result grouped the 20 identified barriers into three major factors to include: weak top management support and BIM environment related issues; cost of BIM software and training issues; and incompatibility, legal, contractual, and culture related issues.

The significance of the study cannot be over-emphasized due to BIM relevance to construction stakeholders and researchers at large.

The study findings would inform the decisions of the construction stakeholders to make some policy recommendations capable of positively influencing the full BIM implementation in AEC firms.

There are several technologies positively impacting the management of construction projects. Building information modelling (BIM) is one such technology, slowly changing project delivery. However, enhancing knowledge transfer (KT) within the construction industry is crucial because of the characteristic slow uptake of innovation. Therefore, this study aims to establish the effectiveness of the KT mechanism for BIM implementation in construction organisations.

This study adopted a quantitative research method where a structured questionnaire was distributed to construction professionals. A partial least square structural equation modeling path analysis was used to test the direct and indirect relationships of computer self-efficacy (CS), perceived ease of use (PEOU), KT and BIM usage.

This study found that CS could improve KT, which will, in turn, increase the implementation of BIM within construction organisations. However, in terms of KT, individuals’ confidence and ability to use BIM inspires them to share the knowledge of BIM they had received through training. Furthermore, this study found that the ease of interacting, learning and being skilful with BIM may not necessarily ensure the actual transfer of knowledge.

This study provides valuable insights into KTs (BIM implementation) in the construction industry. It will enhance the use of BIM systems and related knowledge through effective training amongst construction practitioners. Other previous studies have focused on challenges and barriers to BIM implementation, this study goes deeper into establishing the effectiveness of the KT mechanism for BIM implementation in construction organisations.

The purpose of this chapter is to investigate the adoption and use of building information modelling (BIM) for residential real estate development in Nigeria (using Lagos as a case study), with a view to providing information towards improving BIM uptake, which could enhance sustainable housing delivery in the country. A quantitative research methodology was adopted involving the use of questionnaire survey to collect primary data. The data were obtained from private real estate developers in Lagos State. The self-administered questionnaire was distributed to all the 72 active real estate developers in the study area, and the response rate was 62.5%. The collected data were analysed using statistical tools such as frequency and percentages, mean rating and chi-square. The results revealed a low level of awareness and usage of the transformative and contemporary BIM technology (6D BIM version) by real estate developers. It was established that the 2D and 3D BIM traditional versions were the most utilised across the phases of real estate development process. It was also found that the level of BIM utilisation has a significant relationship with the age and asset base of the real estate developers. The chapter concludes by advocating increase in the asset base and organisational profile of real estate developers to enhance BIM adoption, especially, the 6D BIM, which could facilitate sustainable real estate development.

Building information modelling (BIM) adoption is vital to the productivity and competitive nature of the construction sector. However, BIM adoptions have not been generally embraced by many architecture, engineering and construction (AEC) firms, particularly in developing countries. Moreover, studies that investigate the important drivers to BIM adoptions among construction professionals through quantitative approach are limited. The purpose of this study is to address the aforementioned gap.

This study involves a literature review, a pilot study and a questionnaire survey. The primary data were carried out using structured questionnaires distributed to four different BIM adopter AEC firms. These comprised architectural firms, facility management firms, quantity surveying firms and structural engineering firms in Lagos, Nigeria. Data obtained were analysed using mean score, standard deviation, Kruskal–Wallis test and factor analysis.

The study identified 23 drivers to BIM adoption, and the relative importance of the identified drivers was gauged from each selected BIM adopter AEC firm category. The result of the Kruskal–Wallis test showed that there is no statistically significant difference in the perceptions of the four selected AEC firms in the mean ranking of the identified 23 drivers to BIM adoption. The findings from factor analysis categorized the identified drivers into two major factors to include cost and time savings, improved communication, and BIM awareness and government supports.

The study empirically identifies important drivers to BIM adoption that will be useful for construction stakeholders to formulate strategies to adopt the full implementation of BIM in the AEC firms of Nigeria and other developing countries. Also, this study is important as it identifies, analyses and compares the drivers to BIM adoptions from four different AEC firms, thereby providing robust and more reliable findings.

The study findings will provide information to policymakers and construction stakeholders to make policy recommendations that are capable of positively influencing the widespread adoption of BIM in AEC firms in particular and the construction industry at large. This study is important because the studies that comparatively and empirically analyzed BIM drivers in AEC firms are rare, particularly in developing countries. Hence, this study could be used to benchmark future studies in developing countries.

The Nigerian construction industry, like in most emerging economies has been slow with technological advances such as building information modeling (BIM). More so, the application of BIM among Nigerian practitioners is rather limited to architects’ usage for schematic design and presentation of drawings. The purpose of this study is to enhance BIM’s uptake, this study explores the drivers for the implementation of BIM within the Nigerian construction industry.

An interpretivist epistemological design was adapted to extensively manually review and search the literature on BIM implementation drivers. Based on 14 drivers for BIM implementation drivers identified, a survey questionnaire was used to collect data from the Nigerian construction practitioners. The data obtained is then subjected to descriptive, inferential statistics and multivariate techniques such as factor analysis.

The study, through factor analysis, categorized the 14 drivers to BIM implementation into four principal factors. The factors are construction related-drivers; process digitalization and economic-related drivers; sustainability and efficiency-related drivers; and visualization and productivity-related drivers.

To effectively adopt BIM in the construction industry, it is necessary to identify the BIM implementing drivers, which can act as catalysts of change and, thus leading to sustained adoption of BIM. Therefore, the identified drivers and categorization of principal factors could provide managerial implications for better execution and adoption of BIM, as well as the creation of the required change for the BIM implementation.

The research provides insights into the implementation drivers of BIM in lesser studies in a developing country such as Nigeria. The study further contributes to this research sphere by using factor analysis to customize and contextualize the drivers that were previously identified.

Practitioners have reported a minimal and non-use of building information modelling (BIM), especially in small and medium-sized organisations and BIM infant construction industries. This development calls for a reappraisal of organisations’ strength in capabilities required for BIM uptake towards the target of global construction digitalisation. This study aims to assess the BIM Level 2 uptake capability of organisations in a BIM infant construction industry and identify the underlying interactions between the capability criteria.

The study used a multivariable analysis of fifteen descriptors identified from the people, process, policy, finance and technology domain. Data collection was done in the BIM infant construction industry in Nigeria. Verification of the descriptors and an evaluation of BIM uptake capability in organisations was done. Seventy-three responses were received within the selected context, and data analysis was done with mean weighting and exploratory factor analysis. Maximum Likelihood extraction and Direct Oblimin rotation were used.

Factor analysis revealed three factors that explained 53.28% of the total variance in the BIM Level 2 uptake capability of construction organisations. The factors are workforce capacity and continuous development, an affinity for innovation and strength in physical and operational facilities.

This study provides an overarching and insightful discussion on BIM uptake capability and construction digitalisation with evidence from a BIM-infant construction industry.

The findings of this study are a piece of valuable empirical evidence on Level 2 BIM uptake capability. This empirical situation analysis will inform the advocacy for the advancement of BIM and enhanced utilisation of building information. Evidence on the capability performance of the BIM infant industry has been revealed.

The outcome is expected to stir debate on the preparedness of organisations to further exploit the benefits of BIM in the BIM infant construction industry. Examination of the capability for a particular phase of BIM is scanty in the literature.