Search results

Nowadays, transportation authorities in various countries are in tension as to whether to invest in railroads or roads. There are arguments for each side, and in the end, each transportation authority reaches a kind of balance between the investments. This study aims to anticipate how autonomous vehicles will influence this decision.

The roads' capacity in the era of autonomous vehicles is assessed and research has concluded that the anticipated increase in road capacity will encourage transportation authorities to invest much more in roads than in railroads.

The appearance of the autonomous vehicles will significantly change the balance in favor of the roads, because the roads' capacity will be increased substantially so the roads will be able to accommodate many more vehicles.

Currently, autonomous vehicles are still very rare.

The impact of autonomous vehicles on the decision whether to build more roads is explained.

The study explained why the transportation authorities in the various countries will be more inclined to switch to road construction and why the transition to more roads and fewer railroads will likely be done gradually as more autonomous vehicles enter service.

There is lack of knowledge about how the existing streets need to be redesigned and the infrastructural changes that need to be made to adopt autonomous vehicles. The purpose of this study is to investigate the infrastructure requirements of autonomous vehicles in terms of (1) lane widths, (2) parking spaces, (3) drop-off zones and (4) other facilities, followed by analyzing them and suggesting changes in the existing urban design of Msheireb Downtown Doha (MDD).

Mixed method of combining both qualitative (secondary research of analyzing the existing data about the urban design guidelines for an autonomous future, observations of the existing infrastructure) and quantitative methods (on-site measurements of pedestrian walkways and road lane widths) is used.

The outcome of the research consists of a series of major infrastructural changes with regard to lane widths, parking spaces, pick-up and drop-off zones and other facilities needed for the deployment of autonomous vehicles.

The results imply that Qatar can benefit by adopting the proposed urban design suggestions for the implementation of autonomous vehicles on the streets of MDD in particular, and smart cities of Qatar and the region in general.

The proposed changes can work as a reference and serve as a possible setting for addressing Autonomous Vehicle preparations in emerging cities.

The proposed urban design changes can be adapted for an autonomous future in emerging cities.

This paper aims to predict the behaviour of the vehicles in a mixed driving scenario. This proposes a deep learning model to predict lane-changing scenarios in highways incorporating current and historical information and contextual features. The interactions among the vehicles are modelled using long-short-term memory (LSTM).

Predicting the surrounding vehicles' behaviour is crucial in any Advanced Driver Assistance Systems (ADAS). To make a decision, any prediction models available in the literature consider the present and previous observations of the surrounding vehicles. These existing models failed to consider the contextual features such as traffic density that also affect the behaviour of the vehicles. To forecast the appropriate driving behaviour, a better context-aware learning method should be able to consider a distinct goal for each situation is more significant. Considering this, a deep learning-based model is proposed to predict the lane changing behaviours using past and current information of the vehicle and contextual features. The interactions among vehicles are modeled using an LSTM encoder-decoder. The different lane-changing behaviours of the vehicles are predicted and validated with the benchmarked data set NGSIM and the open data set Level 5.

The lane change behaviour prediction in ADAS is gaining popularity as it is crucial for safe travel in a mixed driving environment. This paper shows the prediction of maneuvers with a prediction window of 5 s using NGSIM and Level 5 data sets. The proposed method gives a prediction accuracy of 97% on average for all lane-change maneuvers for both the data sets.

This research presents a strategy for predicting autonomous vehicle behaviour based on contextual features. The paper focuses on deep learning techniques to assist the ADAS.

This research aims to present a novel cooperative control architecture designed specifically for roads with variations in height and curvature. The primary objective is to enhance the longitudinal and lateral tracking accuracy of the vehicle.

In addressing the challenges posed by time-varying road information and vehicle dynamics parameters, a combination of model predictive control (MPC) and active disturbance rejection control (ADRC) is employed in this study. A coupled controller based on the authors’ model was developed by utilizing the capabilities of MPC and ADRC. Emphasis is placed on the ramifications of road undulations and changes in curvature concerning control effectiveness. Recognizing these factors as disturbances, measures are taken to offset their influences within the system. Load transfer due to variations in road parameters has been considered and integrated into the design of the authors’ synergistic architecture.

The framework's efficacy is validated through hardware-in-the-loop simulation. Experimental results show that the integrated controller is more robust than conventional MPC and PID controllers. Consequently, the integrated controller improves the vehicle's driving stability and safety.

The proposed coupled control strategy notably enhances vehicle stability and reduces slip concerns. A tailored model is introduced integrating a control strategy based on MPC and ADRC which takes into account vertical and longitudinal force variations and allowing it to effectively cope with complex scenarios and multifaceted constraints problems.

Connecting autonomous drones to ground operations and services is a prerequisite for the adoption of scalable and sustainable drone services in the built environment. Despite the rapid advance in the field of autonomous drones, the development of ground infrastructure has received less attention. Contemporary airport design offers potential solutions for the infrastructure serving autonomous drone services. To that end, this paper aims to construct a framework for connecting air and ground operations for autonomous drone services. Furthermore, the paper defines the minimum facilities needed to support unmanned aerial vehicles for autonomous logistics and the collection of aerial data.

The paper reviews the state-of-the-art in airport design literature as the basis for analysing the guidelines of manned aviation applicable to the development of ground infrastructure for autonomous drone services. Socio-technical system analysis was used for identifying the service needs of drones.

The key findings are functional modularity based on the principles of airport design applies to micro-airports and modular service functions can be connected efficiently with an autonomous ground handling system in a sustainable manner addressing the concerns on maintenance, reliability and lifecycle.

As the study was limited to the airport design literature findings, the evolution of solutions may provide features supporting deviating approaches. The role of autonomy and cloud-based service processes are quintessentially different from the conventional airport design and are likely to impact real-life solutions as the area of future research.

The findings of this study provided a framework for establishing the connection between the airside and the landside for the operations of autonomous aerial services. The lack of such framework and ground infrastructure has hindered the large-scale adoption and easy-to-use solutions for sustainable logistics and aerial data collection for decision-making in the built environment.

The evolution of future autonomous aerial services should be accessible to all users, “democratising” the use of drones. The data collected by drones should comply with the privacy-preserving use of the data. The proposed ground infrastructure can contribute to offloading, storing and handling aerial data to support drone services’ acceptability.

To the best of the authors’ knowledge, the paper describes the first design framework for creating a design concept for a modular and autonomous micro-airport system for unmanned aviation based on the applied functions of full-size conventional airports.

Recently, autonomous vehicles (AV) acceptance has been studied intensively. This paper aims to map and analyze the bibliometric characteristics of AV acceptance literature. Furthermore, this research aims to identify research gaps and propose future research opportunities.

The bibliometric analysis was performed. Scopus database was used as the source of the literature. This study selected and analyzed 297 AV acceptance papers. The performance and science mapping analysis were performed.

The developed countries tended to dominate the topic. The publication outlet tended to be in transportation or technology journals. There were four research themes in existing literature. Technology acceptance model (TAM) and UTAUT2 tended to be used for explaining AV acceptance. AV acceptance studies tended to use two types of psychological concepts for understanding AV acceptance, namely risk related concepts and functional utilitarian benefit related concepts. In the context of research design, quantitative approach tended to be used. Self-driving feature was the most exploited feature of AV in the existing literature. Three research gaps were mapped and future research opportunities were proposed.

This paper provided a comprehensive information that allowed scientists to develop future research on AV acceptance.

There is lack of paper that discussed the bibliometric characteristics of AV acceptance literature. This paper fulfilled the gap.

Vehicle allocation problems (VAPs), which are frequently confronted in many transportation activities, primarily including but not limited to full truckload freight transportation operations, induce a significant economic impact. Despite the increasing academic attention to the field, literature still fails to match the needs of and opportunities in the growing industrial practices. In particular, the literature can grow upon the ideas on sustainability, Industry 4.0 and collaboration, which shape future practices not only in logistics but also in many other industries. This review has the potential to enhance and accelerate the development of relevant literature that matches the challenges confronted in industrial problems. Furthermore, this review can help to explore the existing methods, algorithms and techniques employed to address this problem, reveal directions and generate inspiration for potential improvements.

This study provides a literature review on VAPs, focusing on quantitative models that incorporate any of the following emerging logistics trends: sustainability, Industry 4.0 and logistics collaboration.

In the literature, sustainability interactions have been limited to environmental externalities (mostly reducing operational-level emissions) and economic considerations; however, emissions generated throughout the supply chain, other environmental externalities such as waste and product deterioration, or the level of stakeholder engagement, etc., are to be monitored in order to achieve overall climate-neutral services to the society. Moreover, even though there are many types of collaboration (such as co-opetition and vertical collaboration) and Industry 4.0 opportunities (such as sharing information and comanaging distribution operations) that could improve vehicle allocation operations, these topics have not yet received sufficient attention from researchers.

The scientific contribution of this study is twofold: (1) This study analyses decision models of each reviewed article in terms of decision variable, constraint and assumption sets, objectives, modeling and solving approaches, the contribution of the article and the way that any of sustainability, Industry 4.0 and collaboration aspects are incorporated into the model. (2) The authors provide a discussion on the gaps in the related literature, particularly focusing on practical opportunities and serving climate-neutrality targets, carried out under four main streams: logistics collaboration possibilities, supply chain risks, smart solutions and various other potential practices. As a result, the review provides several gaps in the literature and/or potential research ideas that can improve the literature and may provide positive industrial impacts, particularly on how logistics collaboration may be further engaged, which supply chain risks are to be incorporated into decision models, and how smart solutions can be employed to cope with uncertainty and improve the effectiveness and efficiency of operations.

This study aims to explore and ranks the factors that might determine attitudes and intentions toward using autonomous vehicles (AVs).

The “technology acceptance model” (TAM) was extended by assessing the moderating influences of personal-related factors. Data were collected from 378 Vietnamese and analysed using a combination of “partial least squares” and the “adaptive neuro-fuzzy inference system” (ANFIS) technique.

The findings demonstrated the power of TAM in explaining the attitude and intention to use AVs. ANFIS enables ranking the importance of determinants and predicting the outcomes. Perceived ease of use and attitude were the most crucial drivers of attitude and intention to use AVs, respectively. Personal innovativeness negatively moderates the influence of perceived ease of use on attitude. Data privacy concerns moderate positively the impact of perceived usefulness on attitude. The moderating effect of price sensitivity was not supported.

These findings provide insights for policymakers and automobile companies' managers, designers and marketers on driving factors in making decisions to adopt AVs.

The study extends the AVs literature by illustrating the importance of personal-related factors, ranking the determinants of attitude and intention, illustrating the inter-relationships among AVs adoption factors and predicting individuals' attitudes and behaviours towards using AVs.

A distinctive feature of tilt-rotor UAVs is that they can be fully actuated, whereas in fixed-angle rotor UAVs (e.g. common-type quadrotors, octorotors, etc.), the associated dynamic model is characterized by underactuation. Because of the existence of more control inputs, in tilt-rotor UAVs, there is more flexibility in the solution of the associated nonlinear control problem. On the other side, the dynamic model of the tilt-rotor UAVs remains nonlinear and multivariable and this imposes difficulty in the drone's controller design. This paper aims to achieve simultaneously precise tracking of trajectories and minimization of energy dissipation by the UAV's rotors. To this end elaborated control methods have to be developed.

A solution of the nonlinear control problem of tilt-rotor UAVs is attempted using a novel nonlinear optimal control method. This method is characterized by computational simplicity, clear implementation stages and proven global stability properties. At the first stage, approximate linearization is performed on the dynamic model of the tilt-rotor UAV with the use of first-order Taylor series expansion and through the computation of the system's Jacobian matrices. This linearization process is carried out at each sampling instance, around a temporary operating point which is defined by the present value of the tilt-rotor UAV's state vector and by the last sampled value of the control inputs vector. At the second stage, an H-infinity stabilizing controller is designed for the approximately linearized model of the tilt-rotor UAV. To find the feedback gains of the controller, an algebraic Riccati equation is repetitively solved, at each time-step of the control method. Lyapunov stability analysis is used to prove the global stability properties of the control scheme. Moreover, the H-infinity Kalman filter is used as a robust observer so as to enable state estimation-based control. The paper's nonlinear optimal control approach achieves fast and accurate tracking of reference setpoints under moderate variations of the control inputs. Finally, the nonlinear optimal control approach for UAVs with tilting rotors is compared against flatness-based control in successive loops, with the latter method to be also exhibiting satisfactory performance.

So far, nonlinear model predictive control (NMPC) methods have been of questionable performance in treating the nonlinear optimal control problem for tilt-rotor UAVs because NMPC's convergence to optimum depends often on the empirical selection of parameters while also lacking a global stability proof. In the present paper, a novel nonlinear optimal control method is proposed for solving the nonlinear optimal control problem of tilt rotor UAVs. Firstly, by following the assumption of small tilting angles, the state-space model of the UAV is formulated and conditions of differential flatness are given about it. Next, to implement the nonlinear optimal control method, the dynamic model of the tilt-rotor UAV undergoes approximate linearization at each sampling instance around a temporary operating point which is defined by the present value of the system's state vector and by the last sampled value of the control inputs vector. The linearization process is based on first-order Taylor series expansion and on the computation of the associated Jacobian matrices. The modelling error, which is due to the truncation of higher-order terms from the Taylor series, is considered to be a perturbation that is asymptotically compensated by the robustness of the control scheme. For the linearized model of the UAV, an H-infinity stabilizing feedback controller is designed. To select the feedback gains of the H-infinity controller, an algebraic Riccati equation has to be repetitively solved at each time-step of the control method. The stability properties of the control scheme are analysed with the Lyapunov method.

There are no research limitations in the nonlinear optimal control method for tilt-rotor UAVs. The proposed nonlinear optimal control method achieves fast and accurate tracking of setpoints by all state variables of the tilt-rotor UAV under moderate variations of the control inputs. Compared to past approaches for treating the nonlinear optimal (H-infinity) control problem, the paper's approach is applicable also to dynamical systems which have a non-constant control inputs gain matrix. Furthermore, it uses a new Riccati equation to compute the controller's gains and follows a novel Lyapunov analysis to prove global stability for the control loop.

There are no practical implications in the application of the nonlinear optimal control method for tilt-rotor UAVs. On the contrary, the nonlinear optimal control method is applicable to a wider class of dynamical systems than approaches based on the solution of state-dependent Riccati equations (SDRE). The SDRE approaches can be applied only to dynamical systems which can be transformed to the linear parameter varying (LPV) form. Besides, the nonlinear optimal control method performs better than nonlinear optimal control schemes which use approximation of the solution of the Hamilton–Jacobi–Bellman equation by Galerkin series expansions. The stability properties of the Galerkin series expansion-based optimal control approaches are still unproven.

The proposed nonlinear optimal control method is suitable for using in various types of robots, including robotic manipulators and autonomous vehicles. By treating nonlinear control problems for complicated robotic systems, the proposed nonlinear optimal control method can have a positive impact towards economic development. So far the method has been used successfully in (1) industrial robotics: robotic manipulators and networked robotic systems. One can note applications to fully actuated robotic manipulators, redundant manipulators, underactuated manipulators, cranes and load handling systems, time-delayed robotic systems, closed kinematic chain manipulators, flexible-link manipulators and micromanipulators and (2) transportation systems: autonomous vehicles and mobile robots. Besides, one can note applications to two-wheel and unicycle-type vehicles, four-wheel drive vehicles, four-wheel steering vehicles, articulated vehicles, truck and trailer systems, unmanned aerial vehicles, unmanned surface vessels, autonomous underwater vessels and underactuated vessels.

The proposed nonlinear optimal control method is a novel and genuine result and is used for the first time in the dynamic model of tilt-rotor UAVs. The nonlinear optimal control approach exhibits advantages against other control schemes one could have considered for the tilt-rotor UAV dynamics. For instance, (1) compared to the global linearization-based control schemes (such as Lie algebra-based control or flatness-based control), it does not require complicated changes of state variables (diffeomorphisms) and transformation of the system's state-space description. Consequently, it also avoids inverse transformations which may come against singularity problems, (2) compared to NMPC, the proposed nonlinear optimal control method is of proven global stability and the convergence of its iterative search for an optimum does not depend on initialization and controller's parametrization, (3) compared to sliding-mode control and backstepping control the application of the nonlinear optimal control method is not constrained into dynamical systems of a specific state-space form. It is known that unless the controlled system is found in the input–output linearized form, the definition of the associated sliding surfaces is an empirical procedure. Besides, unless the controlled system is found in the backstepping integral (triangular) form, the application of backstepping control is not possible, (4) compared to PID control, the nonlinear optimal control method is of proven global stability and its performance is not dependent on heuristics-based selection of parameters of the controller and (5) compared to multiple-model-based optimal control, the nonlinear optimal control method requires the computation of only one linearization point and the solution of only one Riccati equation.

A switching depth controller based on a variable buoyancy system (VBS) is proposed to improve the performance of small autonomous underwater vehicles (AUVs). First, the requirements of VBS for small AUVs are analyzed. Second, a modular VBS with high extensibility and easy integration is proposed based on the concepts of generality and interchangeability. Subsequently, a depth-switching controller is proposed based on the modular VBS, which combines the best features of the linear active disturbance rejection controller and the nonlinear active disturbance rejection controller.

The controller design and endurance of tiny AUVs are challenging because of their low environmental adaptation, limited energy resources and nonlinear dynamics. Traditional and single linear controllers cannot solve these problems efficiently. Although the VBS can improve the endurance of AUVs, the current VBS is not extensible for small AUVs in terms of the differences in individuals and operating environments.

The switching controller’s performance was examined using simulation with water flow and external disturbances, and the controller’s performance was compared in pool experiments. The results show that switching controllers have greater effectiveness, disturbance rejection capability and robustness even in the face of various disturbances.

A high degree of standardization and integration of VBS significantly enhances the performance of small AUVs. This will help expand the market for small AUV applications.

This solution improves the extensibility of the VBS, making it easier to integrate into different models of small AUVs. The device enhances the endurance and maneuverability of the small AUVs by adjusting buoyancy and center of gravity for low-power hovering and pitch angle control.