Search results

In this study, a highly sensitive and quantitative analysis method using surface-enhanced Raman scattering (SERS)-labeled immunoassay is adopted for bisphenol A bisphenol A (BPA) detection in water samples.

Primarily, an excellent SERS immuno-nanoprobe is prepared, which relays on Au/Ag core-shell nanoparticles tagged 4-mercaptobenzoic acid (4MBA) and labeled with specific antibody against BPA. Second, the coating antigen of 4,4-Bis(4-hydroxyphenol) valeric acid (BVA) coupling poly-L-lysine (PLL) conjugate (BVA-PLL) is fastened on the substrate. Based on competitive immunoassay, the antibody labeled on SERS immuno-nanoprobe will bind with the free BPA and BVA-PLL competitively.

A calibration curve was obtained by plotting the intensity of SERS signal of 4MBA at 1007 cm⁻¹ versus the concentration of BPA. The results indicated that the limit of detection (LOD) for BPA is 1 ng/mL and present a great capacity for higher sensitivity. Furthermore, the method was able to quantitatively detect BPA in water samples, which was validated by high performance liquid chromatography (HPLC).

The method was developed based on competitive immunoassay, and the conjugate (BVA-PLL) was chosen as the coating antigen. Au/Ag core-shell nanoparticles played as the SERS active substrate and were labeled with Raman reporter. The value of this paper is supplying a wide potential for analysis of target analytes in the environmental monitoring and food safety.

The purpose of this study is determination of cadmium using silver-gold bimetallic nanoparticles (Ag-Au BMNPs) and an aptamer modified glassy carbon electrode.

The maximum response of modified electrode was obtained with, 50 mV pulse amplitude, 20 mV/s scan rate in phosphate buffer of pH 4.0. Ag-Au BMNPs, as the mediators improved electron transmit during the entire electron transfer process and the aptasensor response. Herein, the authors used aptamer as the capture probe to prepare an aptasensor with enhanced stability.

The proposed aptasensor exhibited a wide linearity to cadmium in the range of 0.001–0.100 µg/L with a low detection limit of 0.005×10⁻³ µg/L. The glassy carbon electrodes with Ag-Au BMNPs showed a lower detection limit.

This aptasensor has good reproducibility, stability and repeatability and is cost-effective to regenerate. The specificity and selectivity of the novel modified electrode is tested in the presence of other interfering metal ions such as Fe²⁺, Mn²⁺, Mg²⁺, Sb³⁺ and Bi³⁺. The aptasensor shows 10 times more sensitivity and selectivity for Cd²⁺ ions.

This study aims to deal with entropy generation and thermal analysis of magnetic hybrid nanofluid containing silver and gold as nanoparticles (Au-Ag/NPs) in the Eyring–Powell fluid.

The blood is used as a base fluid to study the rheological effects in a wavy asymmetric channel. The effect of viscous dissipation is also taken into account. The mathematical model is developed using the lubrication technique. The perturbation method is used to solve the nondimensional nonlinear differential equations, whereas the pumping properties have been analyzed using numerical integration.

The impact of entropy generation, Brinkman number, Hartmann number, nanoparticles volume fraction, thermal Grashof number, Brinkman number and Eyring–Powell fluid parameter is examined on the velocity profile, temperature profile and pumping characteristics. It is observed that the introduction of gold and silver nanoparticles boosts the velocity field in a smaller segment of the channel. The temperature profile rises for the increasing values of Hartmann number, Brinkman number and nanoparticle volume fractions while the temperature profile is restrained by the Eyring–Powell fluid parameter. The pumping rate rises in all sections as the thermal Grashof number and Hartmann number increase; however, the Eyring–Powell fluid parameter has the reverse effect. The volume of the trapping boluses is significantly affected by the Eyring–Powell fluid parameter, thermal Grashof number and fluid parameter.

The results are original and contribute to discover the role of hybrid nanoparticles under the influence of entropy generation viscous dissipation and magnetic fields. Pharmaceutical technology may use this research for things like better mucoadhesive drug delivery systems and more productive peristaltic micropumps.

Nature and occurrence of food-borne pathogens in raw and processed food products evolved greatly in the past few years due to new modes of transmission and resistance build-up against sundry micro-/macro-environmental conditions. Assurance of food health and safety thus gained immense importance, for which bio-sensing technology proved very promising in the detection and quantification of food-borne pathogens. Considering the importance, different studies have been performed, and different biosensors have been developed. This study aims to summarize the different biosensors used for the deduction of food-borne pathogens.

The present review highlights different biosensors developed apropos to food matrices, factors governing their selection, their potential and applicability. The paper discusses some related key challenges and constraints and also focuses on the needs and future research prospects in this field.

The shift in consumers’ and industries’ perceptions directed the further approach to achieve portable, user and environmental friendly biosensing techniques. Despite of these developments, it was still observed that the comparison among the different biosensors and their categories proved tedious on a single platform; since the food matrices tested, pathogen detected or diagnosed, time of detection, etc., varied greatly and very few products have been commercially launched. Conclusively, a challenge lies in front of food scientists and researchers to maintain pace and develop techniques for efficiently catering to the needs of the food industry.

Biosensors deduction limit varied with the food matrix, type of organism, material of biosensors’ surface, etc. The food matrix itself consists of complex substances, and various types of food are available in nature. Considering the diversity of food there is a need to develop a universal biosensor that can be used for all the food matrices for a pathogen. Further research is needed to develop a pathogen-specific biosensor that can be used for all the food products that may have accuracy to eliminate the traditional method of deduction.

The present paper summarized and categorized the different types of biosensors developed for food-borne pathogens.

The purpose of this paper is to present a sophisticated methodology for inkjet printing of silver nanoparticles (AgNPs) in the range of 80-200 nm on different flexible substrate. AgNPs was chemically deposited by ejection of silver nitrate and ascorbic acid solutions onto different substrates such as paper and textile fabrics. The fabricated pattern was used to employ as electrode for electrochemical sensors.

The morphology of deposited AgNPs was characterized by means of scanning electron microscopy. Moreover, conductivity and electrochemical behavior were identified, respectively, using four probe and cyclic voltammetry techniques. Acquired image shows a well-defined shape and size for the deposited AgNP.

The conductivity of the paper substrate after printing process reached 5.54 × 105 S/m. This printed electrode shows a sharp electrochemical response for early determination of glucose. The proposed electrode provides a new alternative to develop electrochemical sensors using AgNPs chemically deposited on paper and textile fabric surfaces.

This paper aims to report an insightful portable microfluidic system for rapid and selective sensing of Hg²⁺ in the picomolar (pM) concentration using microcantilever-based piezoresistive sensor. The detection time for various laboratory-based techniques is generally 12–24 h. The majority of modules used in the proposed platform are battery oriented; therefore, they are portable and handy to carry-out on-field investigations.

In this study, the authors have incorporated the benefit of three technologies, i.e. thin-film, nanoparticles (NPs) and micro-electro-mechanical systems, to selectively capture the Hg²⁺ at the pM concentration. The morphology and topography of the proposed sensor are characterized using field emission scanning electron microscopy and verification of the experimental results using energy dispersive X-ray.

The proposed portable microfluidic system is able to perform the detection in 5 min with a limit of detection (LOD) of 0.163 ng (0.81 pM/mL) for Hg²⁺, which perfectly describes its excellent performance over other reported techniques.

A microcantilever-based technology is perfect for on-site detection, and a LOD of 0.163 ng (0.81 pM/mL) is outstanding compared to other techniques, but the fabrication of microcantilever sensor is complex.

Many researchers used NPs for heavy metal ions sensing, but the excess usage and industrialization of NPs are rapidly expanding harmful consequences on the human life and nature. Also, the LOD of the NPs-based method is limited to nanomolar concentration. The suggested microfluidic system used the benefit of thin-film and microcantilever devices to provide advancement over the NPs-based approach and it has a selective sensing in pM concentration.

The review glances upon the colorants used for printing on ceramic substrates by ink jet technology and techniques, chemistry involved during the selection of the colorants.

The ink jet technology is an easy and a convenient technique, specially designed colorants are used for such applications with tailor made properties and features.

New developments in technology and chemistry of colorants to achieve successes in application studies of ceramic substrates.

N/A.

This review glances upon the history, development and practical approach of the current techniques with available dyes and pigments and the techniques involved during the synthesis and application.

The review paper provides information about the development of the inkjet technique on ceramics and available colorants with methods.