Search results

The purpose of this study is to design a flight control model for a control surface-less (CSL) tri-tilt-rotor (TTR) unmanned aerial vehicle (UAV) based on a Proportional Integral Derivative (PID) controller to stabilize the altitude and attitude of the UAV subjected to various flying conditions.

First, the proposed UAV with a tilting mechanism is designed and analyzed to obtain the aerodynamic parameters. Second, the dynamics of the proposed UAV are mathematically modeled using Newton-Euler formation. Then, the PID controller is implemented in the simulation model to control flight maneuvers. The model parameters were implemented in a mathematical model to find the system’s stability for various flight conditions. The model was linearized to determine the PID gain values for vertical take-off and landing, cruise and transition mode. The PID controller was tuned to obtain the desired altitude and attitude in a short period. The tuned PID gain values were implemented in the PID controller and the model was simulated.

The main contribution of this study is the mathematical model and controller for a UAV without any control surface and uses only a thrust vector control mechanism which reduces the complexity of the controller. The simulation has been carried out for various flight conditions. The altitude PID controller and the attitude PID controller for CSL-TTR-UAV were tuned to obtain desired altitude and attitude within the optimum duration of 4 s and deviation in the attitude of 8%, which is within the allowable limit of 14%. The findings obtained from the simulation revels that the altitude and attitude control of the CSL-TTR-UAV was achieved by controlling the rpm of the rotor and tilt angle using the PID controller.

A novel CSL TTR UAV mathematical model is developed with a dual tilting mechanism for a tail rotor and single axis tilt for the rotors in the wing. The flight control model controls the UAV without a control surface using a PID controller for the thrust vector mechanism.

The purpose of this paper is to introduce a low-cost quadrotor that can be used for educational purposes and investigate the applicability of a low-cost MEMS laser sensor for accurate altitude control.

A single printed circuit board is designed to form the structure of the quadrotor. A low-cost MEMS motion sensor, a microcontroller and four small motors are mounted on the board. A separate laser sensor module measures the altitude. A remote controller is designed to control the quadrotor’s motion. The remote controller communicates with the quadrotor via wireless connection. Roll and pitch attitude stabilization is achieved using the proportional and derivative control algorithm. The applicability of an MEMS laser sensor for altitude control is also studied.

The low-cost quadrotor works well even though its body structure is made using a printed circuit board. Low pass and Kalman filters work well for attitude estimation and control application. The laser sensor is very accurate and good for altitude feedback; however, it has a relatively short measurement range and its sampling rate is relatively slow, which limits its applications. The vertical velocity obtained by differentiating the laser altitude has delay and inhibits suitable damping. Using the vertical velocity obtained by integrating the vertical accelerometer’s output, the damping performance is improved.

Developing a low-cost quadrotor that can be used for educational purposes and successfully implementing altitude control using a laser sensor and accelerometer.

The control of a quadrotor unmanned aerial vehicle (UAV) is a challenging problem because of its highly nonlinear dynamics, under-actuated nature and strong cross-couplings. To solve this problem, this paper aims to propose a robust control strategy, based on a concept of active disturbance rejection control (ADRC).

The altitude/attitude dynamics of a quadrotor is reformulated into the ADRC framework. Three distinct variations of the error-based ADRC algorithms, with different structures of generalized extended state observers (GESO), are derived for the altitude/attitude trajectory-following task. The convergence of the observation part is proved based on the singular perturbation theory. Through a frequency analysis and a quantitative comparison in a simulated environment, each design is shown to have certain advantages and disadvantages in terms of tracking accuracy and robustness. The digital prototypes of the proposed controllers for quadrotor altitude and attitude control channels are designed and validated through real-time hardware-in-the-loop (HIL) co-simulation, with field-programmable gate array (FPGA) hardware.

The effects of unavailable reference time-derivatives can be estimated by the ESO and rejected through the outer control loop. The higher order ESOs demonstrate better performances, but with reductions of stability margins. Time-domain simulation analysis reveals the benefits of the proposed control structure related to classical control approach. Real-time FPGA-based HIL co-simulations validated the performances of the considered digital controllers in typical quadrotor flight scenarios.

The conducted study forms a set of practical guidelines for end-users for selecting specific ADRC design for quadrotor control depending on the given control objective and work conditions. Furthermore, the paper presents detailed procedure for the design, simulation and validation of the embedded FPGA-based quadrotor control unit.

In light of the currently available literature on error-based ADRC, a comprehensive approach is applied here, which includes the design of error-based ADRC with different GESOs, its frequency-domain and time-domain analyses using different simulation of UAV flight scenarios, as well as its FPGA-based implementation and testing on the real hardware.

The purpose of this paper is to propose a new approach for robust control of an autonomous quadrotor unmanned aerial vehicle (UAV) in automatic take-off, hovering and landing mission and also to improve the stabilizing performance of the quadrotor with inherent time-varying disturbance.

First, the dynamic model of the aerial vehicle is mathematically formulated. Then, a combination of a nonlinear backstepping scheme with the intelligent fuzzy system as a new key idea to generate a robust controller is designed for the stabilization and altitude tracking of the vehicle. For the problem of determining the backstepping control parameters, a new heuristic algorithm, namely, Gravitational Search Algorithm has been used.

The control law design utilizes the backstepping control methodology that uses Lyapunov function which can guarantee the stability of the nominal model system, whereas the intelligent system is used as a compensator to attenuate the effects caused by external disturbances. Simulation results demonstrate that the proposed control scheme can achieve favorable control performances for automatic take-off, hovering and landing mission of quadrotor UAV even in the presence of unknown perturbations.

This paper propose a new robust control design approach which incorporates the backstepping control with fuzzy system for quadrotor UAV with inherent time-varying disturbance. The originality of this work relies on the technique to compensate the disturbances acting on the quadrotor UAV. In this new approach, the fuzzy system is introduced as an auxiliary control effort to compensate the effect of disturbances. Because the proposed control technique has the capability of robustness against disturbance, thus, it is also suitable to be applied for a broad class of uncertain nonlinear systems.

This paper aims to provide a mathematical modeling and design of H-infinity controller for an autonomous vertical take-off and landing (VTOL) Quad Tiltrotor hybrid unmanned aerial vehicles (UAVs). The variation in the aerodynamics and model dynamics of these aerial vehicles due to its tilting rotors are the key issues and challenges, which attracts the attention of many researchers. They carry parametric uncertainties (such as non-linear friction force, backlash, etc.), which drives the designed controller based on the nominal model to instability or performance degradation. The controller needs to take these factors into consideration and still give good stability and performance. Hence, a robust H-infinity controller is proposed that can handle these uncertainties.

A unique VTOL Quad Tiltrotor hybrid UAV, which operates in three flight modes, is mathematically modeled using Newton–Euler equations of motion. The contribution of the model is its ability to combine high-speed level flight, VTOL and transition between these two phases. The transition involves the tilting of the proprotors from 90° to 0° and vice-versa in 15° intervals. A robust H-infinity control strategy is proposed, evaluated and analyzed through simulation to control the flight dynamics for different modes of operation.

The main contribution of this research is the mathematical modeling of three flight modes (vertical takeoff–forward, transition–cruise-back, transition-vertical landing) of operation by controlling the revolutions per minute and tilt angles, which are independent of each other. An autonomous flight control system using a robust H-infinity controller to stabilize the mode of transition is designed for the Quad Tiltrotor UAV in the presence of uncertainties, noise and disturbances using MATLAB/SIMULINK. This paper focused on improving the disturbance rejection properties of the proposed UAV by designing a robust H-infinity controller for position and orientation trajectory regulation in the presence of uncertainty. The simulation results show that the Tiltrotor achieves transition successfully with disturbances, noise and uncertainties being present.

A novel VTOL Quad Tiltrotor UAV mathematical model is developed with a special tilting rotor mechanism, which combines both aircraft and helicopter flight modes with the transition taking place in between phases using robust H-infinity controller for attitude, altitude and trajectory regulation in the presence of uncertainty.

This paper aims to propose a new multi-layered optimal navigation system that jointly optimizes the energy consumption, improves the robustness and raises the performance of a quadrotor unmanned aerial vehicle (UAV).

The proposed system is designed as a multi-layered system. First, the control architecture layer links the input and the output spaces via quaternion-based differential flatness equations. Then, the trajectory generation layer determines the optimal reference path and avoids obstacles to secure the UAV from collisions. Finally, the control layer allows the quadrotor to track the generated path and guarantees the stability using a double loop non-linear optimal backstepping controller (OBS).

All the obtained results are confirmed using several scenarios in different situations to prove the accuracy, energy optimization and the robustness of the designed system.

The proposed controllers are easily implementable on-board and are computationally efficient.

The originality of this research is the design of a multi-layered optimal navigation system for quadrotor UAV. The proposed control architecture presents a direct relation between the states and their derivatives, which then simplifies the trajectory generation problem. Furthermore, the derived differentially flat equations allow optimization to occur within the output space as opposed to the control space. This is beneficial because constraints such as obstacle avoidance occur in the output space; hence, the computation time for constraint handling is reduced. For the OBS, the novelty is that all controller parameters are derived using the multi-objective genetic algorithm (MO-GA) that optimizes all the quadrotor state’s cost functions jointly.

The aim of this paper is to design a nonlinear disturbance observer-based control (DOBC) method obtained by patching a control method developed using a robust adaptive technique and a DO.

For designing a DOBC, initially a class of nonlinear system is considered with an external disturbance. First, a DO is designed to estimate the external disturbances. This estimate is combined with the controller to reject the disturbances and obtain the desired control objective. For designing a controller, the robust sliding mode control theory is used. Furthermore, instead of using a constant switching gain, an adaptive gain tuning criterion is designed using Lyapunov candidate function. To investigate the stability and effectiveness of the developed DOBC, stability analysis and simulation study are presented.

The major findings of this paper include the criteria of designing the robust adaptive control parameters and investigating the disturbance rejection when robust adaptive control based DOBC is developed.

In practice, the flight of quadrotor is affected by different kind of external disturbances, thus leading to the change in dynamics. Hence, it is necessary to design DOBCs based on robust adaptive controllers such that the quadrotor model adapts to the change in dynamics, as well as nullify the effect of disturbances.

Designing DOBCs based on robust control method is a common practice; however, the robust adaptive control method is rarely developed. This paper contributes in the domain of DOBC based on robust adaptive control methods such that the behavior of controller varies with the change in dynamics occurring due to external disturbances.

This study aims to minimize the risk of costly failures of flight tests during the path tracking control design, and a noble approach has been proposed in this study to put the whole vehicle-in-the simulation loop. Working with the real system is essential for developing intelligent and data-driven controllers for multirotor drones which needs learning the drones' nonlinear complicated dynamics. The vehicle-in-the-loop (VIL) platform developed in this paper is a safe and effective solution to deal with this problem.

To avoid risky flight test during controller design, the multirotor is hinged to a shaft that allows the multirotor's angular motion but restricts translational motion. The test-bed includes the real system attitude dynamics and the simulation of the position dynamics to model the complete flight based on real-time reactions of the vehicle. For the authors' case study, a hexacopter angular motion provides the real-time attitude data in translational motion simulation loop. To test the set-up, a proportional-integral-derivative (PID) and a brain emotional learning-based intelligent controller (BELBIC) is implemented for tracking of circle and 8-shape flight trajectories.

The results show that the platform helps the intelligent controller to learn the system dynamics without worrying about the failure in the early stages of the design and in the real-world flight test. Although the hexacopter translational dynamics is modeled in simulation, the authors still have highly accurate attitude dynamics matching the requirement of the control loop design. The comparison of the two controllers also shows that the performance of BELBIC is better than PID in this test.

The research background is reviewed in the introduction section. The other sections are originally developed in this paper.

Reducing fuel consumption of unmanned aerial vehicles (UAVs) during transient operation is a cornerstone to achieve environment-friendly operations. The purpose of this paper is to develop a control scheme that improves the fuel economy of a turbojet in its full operating envelope.

A novel direct-thrust linear quadratic integral (LQI) approach, comprised by an optimal observer/controller satisfying specified performance parameters, is presented. The thrust estimator, based in a Wiener model, is validated with the experimental data of a micro-turbojet. Model uncertainty is characterized by analyzing variations between the identified model and measured data. The resulting uncertainty range is used to verify closed-loop stability with the circle criterion. The proposed controller provides stable responses with the specified performance in the whole operating range, even with after considering plant nonlinearities. Finally, the direct-thrust LQI is compared with a standard thrust controller to assess fuel economy and performance.

The direct-thrust LQI approach reduced the fuel consumption by 2.1090% in the most realistic scenario. The controllers were also evaluated using the environmental effect parameter (EEP) and transient-thrust-specific fuel consumption (T-TSFC). These novel metrics are proposed to evaluate the environmental impact during transient-thrust operations. The direct-thrust LQI approach has a more efficient fuel consumption according to these metrics. The results also show that isolating the thrust dynamics within the feedback loop has an important impact in fuel economy. Controllers were also evaluated using the EEP and T-TSFC. These novel metrics are proposed to evaluate the environmental impact during transient-thrust operations. The direct-thrust LQI approach has a more efficient fuel consumption according to these metrics. The results also show that isolating the thrust dynamics within the feedback loop has an important impact in fuel economy.

This study shows the design of an effective direct-thrust control approach that minimizes fuel consumption, ensures stable responses for the full operation range, allows isolating the thrust dynamics when designing the controller and is compatible with classical robustness and performance metrics. Finally, the study shows that a simple controller can reduce the fuel consumption of the turbojet during transient operation in scenarios that approximate realistic operating conditions.

The purpose of this paper is to optimize the simultaneous flight performance of a hexarotor unmanned aerial vehicle (UAV) by using simultaneous perturbation stochastic approximation (i.e. SPSA), deep neural network and proportional integral derivative (i.e. PID) according to varying arm length (i.e. morphing).

In this paper, proper PID gain coefficients and morphing ratio were obtained using the stochastic optimization method, also known as SPSA to maximize flight efficiency. Because it is difficult to establish an analytical connection between the morphing ratio and hexarotor moments of inertia, the deep neural network was used to obtain the moments of inertia according to the morphing ratio. By using SPSA and deep neural network, the best performance indexes were obtained and both longitudinal and lateral flight simulations were performed with the obtained data.

With SPSA, the best PID coefficients and morphing ratio are obtained for both longitudinal and lateral flight. Because the hexarotor solid body model changes according to the morphing ratio, the moment of inertia values used in the simulations also change. According to the morphing ratio, the moment of inertia values was obtained with the deep neural network over a created data set.

It takes a long time to obtain the morphing ratio suitable for the hexarotor model and the PID gain coefficients suitable for this morphing ratio. However, this situation can be overcome with the proposed SPSA. In addition, it takes a long time to obtain the appropriate moments of inertia according to the morphing ratio. However, in this case, it was overcome using the deep neural network.

Determining the morphing ratio and PID gain coefficients using the optimization method, as well as determining the moments of inertia using the deep neural network, is very useful as it can increase the efficiency of hexarotor flight and flight efficiently with different arm lengths. With the proposed method, the hexarotor design performance criteria (i.e. rise time, settling time and overshoot) values were significantly improved compared to similar studies.

Determining the hexarotor flight parameters using SPSA and deep neural network provides advantages in terms of time, cost and applicability.

The hexarotor flight efficiency is improved with the proposed SPSA and deep neural network approaches. In addition, the desired flight parameters can be obtained more quickly and reliably with the proposed approaches. The design performance criteria were also improved, enabling the hexarotor UAV to follow the given trajectory in the best way and providing convenience for end users. SPSA was preferred because it converged faster than other methods. While other methods perform 2n operations per iteration, SPSA only performs two operations. To obtain the moment of inertia, many physical parameter values of the UAV are required in the existing methods. In the proposed method, by creating a date set, only arm length and moment of inertia were estimated without the need to obtain physical parameters with the deep neural network structure.