Search results

The purpose of this paper is to investigate the benefit of pre-emptive disruption management measures for assembly systems towards the target dimension adherence to delivery times.

The research was conducted by creating simulation models for typical assembly systems and measuring its varying throughput times due to changes in their disruption profiles. Due to the variability of assembly systems, key influence factors were investigated and used as a foundation for the simulation setup. Additionally, a disruption profile for each simulated process was developed, using the established disruption categories material, information and capacity. The categories are described by statistical distributions, defining the interval between the disruptions and the disruption duration. By a statistical experiment plan, the effect of a reduced disruption potential onto the throughput time was investigated.

Pre-emptive disruption management is beneficial, but its benefit depends on the operated assembly system and its organisation form, such as line or group assembly. Measures have on average a higher beneficial impact on group assemblies than on line assemblies. Furthermore, it was proven that the benefit, in form of better adherence to delivery times, per reduced disruption potential has a declining character and approximates a distinct maximum.

Characterising the benefit of pre-emptive disruption management measures enables managers to use this concept in their daily production to minimise overall costs. Despite the hardly predictable influence of pre-emptive disruption measures, these research results can be implemented into a heuristic for efficiently choosing these measures.

The purpose of the study was to investigate the alignment between current product and manufacturing systems and how it could be achieved.

Case study research method was chosen for the collection and analysis of empirical data. The data was of qualitative nature and was collected using research techniques such as observations through video recordings of processes, documents and open and semi-structured interviews.

The variation of outer side sub-element of the exterior wall element was found to not be aligned with its corresponding assembly. A hybrid assembly of outer side sub-elements characterised by flexibility and reconfigurability can be developed.

The study is limited to the exterior wall element and corresponding manufacturing system.

The presented approach was formulated with the aim to be used both for the analysis of existing products and manufacturing systems as well as for the design of new manufacturing systems.

So far, this is the first study in the context of timber house building where the alignment between product and manufacturing systems was investigated by considering product variety and flexibility of manufacturing systems.

The electronics industry is a key industry in South Korea. To improve efficiency and maintain a competitive edge in fast-paced technological age it is critical to synchronize production supply with market demand. This paper focuses on the strategies which make the “just in time” production system within the electronic supply chain. The presented case study of Samsung Electronics Thin Film Transistor-Liquid Crystal Display (TFT-LCD) Inbound Logistics provides a solid example of process integration in the areas of: packaging, transportation and information sharing. The problems faced by Samsung Electronics in the early 2000’s were a direct result of an imbalance between increased traffic/demand and existing production capacity. The most detrimental of these problems caused delays in supply, shortage of space in the hub center and the bottlenecking of supply transportation. This paper demonstrates how Samsung Electronics reexamined and systematically streamlined their existing processes and how they successfully integrated “lean thinking” strategies to all areas of TFT-LCD production. As a result of the integration of these strategies, Samsung Electronics began using a line-to-line packing system which focused on packing items in a group using a standardized, returnable packing system. Additionally, they opted to replace their paper invoice system for an improved transportation system through which a data could reflect flows of information and materials in real time. The integration of these strategies gave Samsung Electronics a new approach to TFT-LCD Inbound Logistics which allowed them to overcome their dilemmas and resulted in successful outcomes, decreased lead times, higher quality products and an reduction in total costs.

The purpose of this paper is to increase productivity through smart maintenance planning by including productivity as one of the objectives of the maintenance organization. Therefore, the goals of the paper are to investigate existing machine criticality assessment and identify components of the criticality assessment tool to increase productivity.

An embedded multiple case study research design was adopted in this paper. Six different cases were chosen from six different production sites operated by three multi-national manufacturing companies. Data collection was carried out in the form of interviews, focus groups and archival records. More than one source of data was collected in each of the cases. The cases included different production layouts such as machining, assembly and foundry, which ensured data variety.

The main finding of the paper is a deeper understanding of how manufacturing companies assess machine criticality and plan maintenance activities. The empirical findings showed that there is a lack of trust regarding existing criticality assessment tools. As a result, necessary changes within the maintenance organizations in order to increase productivity were identified. These are technological advancements, i.e. a dynamic and data-driven approach and organizational changes, i.e. approaching with a systems perspective when performing maintenance prioritization.

Machine criticality assessment studies are rare, especially empirical research. The originality of this paper lies in the empirical research conducted on smart maintenance planning for productivity improvement. In addition, identifying the components for machine criticality assessment is equally important for research and industries to efficient planning of maintenance activities.

The purpose of this paper is to explore the selection of decision-making approaches at manufacturing companies when implementing process innovations.

This study reviews the current understanding of decision structuredness for determining a decision-making approach and conducts a case study based on an interactive research approach at a global manufacturer.

The findings show the correspondence of intuitive, normative and combined intuitive and normative decision-making approaches in relation to varying degrees of equivocality and analyzability. Accordingly, the conditions for determining a decision-making choice when implementing process innovations are revealed.

This study contributes to increased understanding of the combined use of intuitive and normative decision making in production system design.

Empirical data are drawn from two projects in the heavy-vehicle industry. The study describes decisions, from start to finish, and the corresponding decision-making approaches when implementing process innovations. These findings are of value to staff responsible for the design of production systems.

Unlike prior conceptual studies, this study considers normative, intuitive and combined intuitive and normative decision making. In addition, this study extends the current understanding of decision structuredness and discloses the correspondence of decision-making approaches to varying degrees of equivocality and analyzability.

Drawing on the theoretical concept of organisational fit, this paper questions the relevance of employees' participation in the link between continuous improvement (CI) and operational performance. The literature has long emphasised that to be successful, CI implementation needs to rely on employees' involvement as soon as its inception. This paper argues that this approach is not generalisable.

Based on a database of 330 firms across 15 countries, regression analyses were used to hypothesise that the fit between CI and employee participation is positively associated with operational performance, and that the fit between CI and centralisation of authority is negatively associated with operational performance. The authors also ran a robustness check with polynomial regression analyses and the response surface methodology.

CI–employee participation fit is positively associated with operational performance, suggesting that there is less need for employees to be involved when a firm has scarcely developed CI. Employee participation becomes gradually more relevant as CI progresses. Moreover, the results demonstrate that the CI–centralisation of authority fit is negatively associated with operational performance, suggesting that a top-down management approach with centralised authority is preferable when CI is low, whereas a bottom-up management approach is helpful when a firm has extensively developed CI.

This research draws on the concept of organisational fit to explore the relationships between internal practices in the operations management literature. The authors suggest that managers should dynamically balance the practices of employee participation and centralisation of authority as CI improves. This study highlights that CI has different evolutionary levels that require different managerial approaches and practices.

Recent changes in the UK to the regulation and modes of work in the formal and informal economies are considered. Research in this field has tended to remain in silos (treating formal economy working conditions separately from research on the informal economy). The question is whether the means of work and benefits to the worker for formal and informal work are now as different as the former images of formal and informal economy work imply under a “jobs-for-life” economy. The purpose of this paper is to consider whether the current aim of government regulation of the informal economy – to formalise it – is actually of benefit to workers, as might be supposed.

This paper considers recent research findings on the formal and informal economy, using official government statistics for the UK and more detailed European studies on the informal economy.

This paper argues that formal employment in the UK is becoming more casualised, with less associated benefits to employees. Though it is still of benefit to the state to formalise informal work (to increase tax take), some of the links between formalisation and a good working environment for workers are being broken, which may lead to the informal economy becoming more popular and requiring different priorities in its regulation.

This paper argues that we need to change our assumptions and image of work in the formal economy, compared to that in the informal economy.

Many problems occur when assigning tasks to work centres, especially in determining the required number of workstations for line balancing which requires a minimum theoretical number of workstations. The most common problem is bottleneck. In this paper, a method is proposed to solve floating tasks problem in single-model line when the actual required number of workstations exceeds the minimum theoretical number, and the standard time of the floating task (work center) exceeds the cycle time. The floating task will represent a critical bottleneck activity in line. The proposed method depends on minimizing the standard time of critical bottleneck and non-critical activities by a minimum free-floating time depends on the average of slack times of the non-critical activities, and it will increase the line efficiency from (77%) to (88%), and balance delay is minimized from (23%) to (12%).

The purpose of this paper is to investigate and quantify the impact of product complexity, including architectural complexity, on operator learning, productivity and quality performance in both assembly and disassembly operations. This topic has not been extensively investigated in previous research.

An extensive experimental campaign involving 84 operators was conducted to repeatedly assemble and disassemble six different products of varying complexity to construct productivity and quality learning curves. Data from the experiment were analysed using statistical methods.

The human learning factor of productivity increases superlinearly with the increasing architectural complexity of products, i.e. from centralised to distributed architectures, both in assembly and disassembly, regardless of the level of overall product complexity. On the other hand, the human learning factor of quality performance decreases superlinearly as the architectural complexity of products increases. The intrinsic characteristics of product architecture are the reasons for this difference in learning factor.

The results of the study suggest that considering product complexity, particularly architectural complexity, in the design and planning of manufacturing processes can optimise operator learning, productivity and quality performance, and inform decisions about improving manufacturing operations.

While previous research has focussed on the effects of complexity on process time and defect generation, this study is amongst the first to investigate and quantify the effects of product complexity, including architectural complexity, on operator learning using an extensive experimental campaign.

New service businesses carry opportunities for industrial companies. The different cost management and management control implications of those service businesses deserve attention, which is a widely under-researched area in management accounting and control literature. Digital twins could hold potential in unveiling and supporting those new service business opportunities, as a unique approach of this paper. Thus, the purpose of this paper is to examine the possibility and potential for creating a digital twin of a service, especially to unveil the management accounting and control implications of the digital twin in developing new service businesses.

This paper investigates the potential of a digital twin in unveiling cost and control implications of new service businesses by examining the characteristics of a digital twin in the service business development context. The paper use an in-depth interventionist case study, where the designed animations illustrate the possibilities of a digital twin of a service. The animations showing the service process characteristics were first used as a communication tool and eventually those animations were actively used in customer cases for different purposes. This motivated the idea for examining the implications of such animations representing a digital twin of a service.

The paper provides empirical insights regarding the potential for developing and using a digital twin of a service for different cost management and management control purposes. The digital twin of a service may include all main details of a new service offering, simulating the functionality of a service, hence making the performance and the implications of the new service concept clear for all the stakeholders. The digital twin of the service enables defining the processes, setting targets and helps communication about the value generation. Thus, they represent a significant toolkit for the management accounting and control function of the manufacturers.

This paper is among the first attempts to understand the digital twin of the service. The paper is unique in providing financial and control implications of digital twins also in the context of service business development. The in-depth interventionist approach enabled an exceptional exploration process on the subject. The article paves the way toward further research on managing the digital twins of services in the future.