Search results

Digital technologies emerged as innovative avenues for launching new products, advertising brands, increasing customer awareness and thus leaving a remarkable impact on the online marketplace. The present study analyzed the effects of crucial antecedents of AR interactive technology on customers' behavior toward AR-based e-commerce websites.

Convenience sampling was used to collect primary data from 357 iGen respondents aged 16–22 years; residing in New Delhi and the NCR region of India and examined using the structural equation modeling technique.

Results revealed that technology anxiety and virtuality significantly influence customers' attitudes and behavioral intentions toward AR-based e-commerce websites. However, interactivity and innovativeness remain non-significant. Additionally, non-significant moderating effects were identified for the moderators, i.e. trust and need for touch. At the same time, gender has a significant moderating effect only for the association between technology anxiety and attitude toward AR-based e-commerce websites.

The study summarizes numerous theoretical and managerial implications for AR-based website designers and policymakers, followed by the crucial limitations and directions for future research.

The present research provides a significant understanding of the e-commerce industry by providing valuable insights about young iGen consumers' perceptions of AR-based e-commerce websites.

Milling is a flexible creation process for the manufacturing of dies and aeronautical parts. While machining thin-walled parts, heat generation during machining essentially affects the accuracy. The workpiece temperature (WT), as well as the responses like material removal rate (MRR) and surface roughness (SR) for input parameters like cutting speed (CS), feed rate (F), depth-of-cut (DOC), step over (SO) and tool diameter (TD), becomes critical for sustaining the accuracy of the thin walls.

Response surface methodology was used to make 46 tests. To convert the multi-character problem into a single-character problem, the weightage was assessed using the entropy approach and the grey relational coefficient (GRC) was determined. To investigate the connection among input parameters and single-objective (GRC), a fuzzy mathematical modelling technique was used. The optimal performance of process parameters was estimated by grey relational entropy grade (GREG)-fuzzy and genetic algorithm (GA) optimization.

SR was found to be a significant process parameter, with CS, feed and DOC, respectively. Similarly, F, DOC and TD were found to be significant process parameters with MRR, respectively, and F, DOC, SO and TD were found to be significant process parameters with WT, respectively. GREG-fuzzy-GA found more suitable for minimizing the WT with the constraint s of SR and MRR and provide maximum desirability of 0.665. The projected and experimental values have a good agreement, with a standard error of 5.85%, and so the responses predicted by the suggested method are better optimized.

The GREG-fuzzy-GA is a new hybrid technique for analysing Inconel625 behaviour during machining in a 2.5D milling process.

This study aims to investigate the effect of slanted perforation diameter in tabs for the control of Mach 1.4 underexpanded supersonic jet flow characteristics.

Numerical investigation was carried out for NPR 5 to analyze the effect of slanted perforation diameter in tabs to control the Mach 1.4 jet. Four sets of tabs with slanted circular perforation geometries (Φ_p = 1, 1.5, 2 and 2.5 mm) were considered in this study. The inclination angle of 20° (α_P) with reference to the jet axis was maintained constant for all the four tabs considered.

Determined value indicates there is a 68%, 71%, 73% and 75% drop in supersonic core for the Φ_p = 1, 1.5, 2.0 and 2.5 mm, respectively. The results show that the tabs with 2.5 mm perforation diameter were found to be efficient in reducing the supersonic jet core in comparison with other tab cases. The reduction in supersonic core length is due to the extent of miniscule vortices exuviating from slanted small and large diameter perforation in the tabs.

The concept of slanted perforation can be applied in scramjet combustion, which finds its best application in hypersonic vehicles and in noise suppression in fighter aircraft.

Slanted perforation and circular shapes with different diameters have not been studied in the supersonic regime. Examining the effect of circular diameter in slanted perforation is an innovation in this research paper.

The public distribution system (PDS) is an Indian food security system established to manage the distribution of food grains at affordable prices. As a result of the population explosion, the long-established PDS system finds it challenging to maintain operational efficiency, quality, trust and transparency. This paper explores the possibility of leveraging blockchain technology to overcome these operational hurdles.

Through a literature review and expert interactions, the present research identifies critical success factors in terms of enablers and barriers that influence the adoption of blockchain technology in PDS. Furthermore, we propose two independent interpretive structural models (ISM) and MICMAC to characterize these attributes.

The research identifies 15 distinct enablers and ten barriers that influence the diffusion of the latest technology in the sector at focus. The analyses disclose the interrelationships/dependencies among these enablers and between barriers, along with their individual driving power and dependence power.

The research showcases the importance of automating the system and illustrates how the features of blockchain technology can assist in augmenting stakeholder satisfaction levels. However, poor or nonexistent government regulations and patronage are found to be the major impediments to adoption. The research also delineates the cost implications of this barrier through its interrelationships with other barriers.

Interesting inferences are drawn from the models that offer actionable insights for the industry, government and technologists for improving PDS performance. Such interventions will ensure national food security through enhanced trust and transparency, which can further improve efficiency and effectiveness.

This paper aims to focus on the issue of high employee turnover in the Indian tech industry. An integrative review is conducted to analyse the past and current state of literature, as well as prepare a research agenda for future studies.

A pool of 72 articles published between 2010 and 2022 is reviewed with a special focus on Indian tech employees. This study elucidates the extent and impact of employee retention strategies through content analysis.

Two broad perspectives have been established in the literature: the reasons for quitting and the explanations for staying. By means of a comprehensive review, this paper combines these two aspects of literature and suggests factors under organization’s control to retain competent tech employees.

The study is designed to integrate the two theoretical viewpoints of employee turnover literature by consolidating the reasons behind quitting behaviour and staying intention. Codes combining the two aspects are presented as a valuable resource to retain tech talent.

The present study was designed to explore the major challenges being faced by the Indian nurses' pre-post pandemic period affecting their well-being (WB) and identify factors that motivated them to perform their service wholeheartedly during the pandemic. The study also tries to bridge the gap in the study area by providing various ways that can help maintain the WB of health care professionals.

A descriptive exploratory qualitative design involving semi-structured interviews was conducted during December–January 2021 with 30 nurses from hospitals in Punjab Qualitative and thematic data analysis technique were adopted. In addition, a literature review was also conducted to study the various factors that affect the WB of health care professionals.

There are various themes and subthemes that were identified by the health care professionals, such as (1) psychological WB, (2) social WB and (3) workplace WB and (4) key motivators. This research work has identified various managerial implications that can play a huge rolein strengthening the healthcare sector of the entire world economy, paving the way toward the better WB of healthcare professionals (HCPs).

Firstly, it is probably the only study that is performed on nursing staff to evaluate their personal experiences during crucial times. It has successfully compared the factors affecting WB pre- and post-pandemic, leading to the emergence of many new factors that have originated due to the pandemic and are the cause of the poor WB of HCPs (Figures 2, 4). Secondly, it is the only study that targeted only those nurses who have provided their services in both scenarios. Finally, the study has been a pioneer in identifying the importance of maintaining the WB of HCPs at hospitals.

The purpose of this study is to identify and analyze the barriers associated with the adoption of Industry 4.0 technologies in agricultural supply chains.

The study initially identified thirteen barriers by conducting a literature review and semi-structured interviews with key stakeholders. Subsequently, these barriers were validated and modeled using an integrated Fuzzy Delphi-ISM approach. Finally, MICMAC analysis was employed to categorize the barriers into distinct clusters.

The results provide considerable insights into the hierarchical structure and complex interrelationships between the barriers as well the driving and dependence power of barriers. Lack of information about technologies and lack of compatibility with traditional methods emerged as the two main barriers which directly and indirectly influence the other ones.

The robust hybrid Fuzzy Delphi and ISM techniques used in this study can serve as a useful model and benchmark for similar studies probing the barriers to Industry 4.0 adoption. From a theoretical standpoint, this study expands the scope of institutional theory in explaining Industry 4.0 adoption barriers.

The study is timely for the post-COVID-19 recovery and growth of the agricultural sector. The findings are helpful for policymakers and agriculture supply chain stakeholders in devising new strategies and policy interventions to prioritize and address Industry 4.0 adoption barriers.

It is the first comprehensive, multi-country and multi-method empirical study to comprehensively identify and model barriers to Industry 4.0 adoption in agricultural supply chains in emerging economies.

Smart HR 4.0 is a new concept characterized by adopting innovative technologies of Industry 4.0 (I4.0) in the HR domain. This study attempts to identify the key factors of Smart HR 4.0 to foster organizational innovation ambidexterity.

Based on review of literature and survey from expert opinions by using the Delphi method, 12 factors were found most suitable for this study. Further, the fuzzy-TISM technique was used to establish contextual relationships and develop a hierarchical model on the identified factors. Subsequently, the MICMAC analysis was applied to classify these factors according to their driving and dependence power.

This study framed a conceptual hierarchical model of Smart HR 4.0 and established contextual relationships among identified factors. Result shows that smart organic structure, industry–institute interface, IT-enabled system and ambidextrous leadership are important factors as they have the highest driving power. Further, knowledge management, learning culture and psychological empowerment are the linkage factors having both driving as well as dependency power in the whole system.

This study can guide the managers in smoothly implementing these practices to manage their human capital amidst digital disruption, ensuring innovation competitiveness of the firm. The structural hierarchical framework of Smart HR 4.0 may serve as a blueprint for HR professionals and business leaders to attain organizational innovation ambidexterity in the current wave of digital disruptions (Industry 4.0).

This study provides a holistic model of smart HR 4.0 integrating innovation ambidexterity in I4.0.