Search results

The paper aims to describe the positive and negative effects of night lights in historical sites, as well as the most salient challenges faced by the visitors of these sites and determine ways to address them. The study aims to suggest several light-and-shadow approaches and designs to enhance the experience of visiting historical sites.

This study identifies problems of nightlife in historical sites with an online international questionnaire to determine the preferences and difficulties faced by visitors of historical sites during day and night. After that Egypt was determined as a sample case of a developing country; its archaeological sites need to be improved. The main problems of historical Egyptian sites were investigated and approaches in developing historical sites with interactive lighting design were presented after an online questionnaire to the Egyptian society.

The paper shows that archaeological sites need some development, especially in their technological and lighting aspects, to overcome visitors’ low night-time interest in archaeological sites. Research has found certain limitations in the effects of constructing artificial illumination. The study provides modern sustainable solution for some light challenges in historical sites with approaches and solutions to solve it.

The results of that research could be applied in developing countries, but with larger specific studies to the historical urban locations according to the politics of the country.

The paper includes sustainable approaches in developing historical sites with technological lighting design required to enhance historical sites at night-time and make visits more interactive and interesting.

This paper presents an identified need of historical sites visitors’ to study applying modern approaches in enhancing urban historical sites.

This study aims to assess the spread of environmental literacy graduation requirements at public universities in the USA, and to highlight factors that mediate the adoption of this curriculum innovation.

The author analyzed the undergraduate general education curriculum requirements at all 549 public BA-granting higher education institutions in the USA between 2020 and 2022.

The study found that only 27 US public universities out of 540 have an environmental literacy graduation requirement, which represents 5% of universities and is substantially lower than previous estimates.

First, this study provides a more complete, more reliable and more current assessment of the graduation requirement’s presence at US tertiary institutions, and shows the number of universities that have implemented this innovation is lower than was estimated a decade ago. Second, it draws from the scholarship on the infusion of sustainability into the university curriculum to provide a comprehensive discussion of factors that mediate the pursuit and implementation of the graduation requirement. As well, it identifies factors that played a key role in one pertinent case.

Key to transnational higher education (HE) cooperation is building trust to allow for seamless recognition of studies. Building on the Tuning Educational Structures initiative (2001) and lessons learnt from the Organisation for Economic Cooperation and Development (OECD)-Assessment of Learning Outcomes in Higher Education (AHELO) feasibility study, this paper offers a sophisticated approach developed by the European Union (EU)-co-financed project Measuring and Comparing Achievements of Learning Outcomes in Europe (CALOHEE). These evidence the quality and relevance of learning by applying transparent and reliable indicators at the overarching and disciplinary levels. The model results allow for transnational diagnostic assessments to identify the strength and weaknesses of degree programmes.

The materials presented have been developed from 2016 to 2023, applying a bottom-up approach involving approximately 150 academics from 20+ European countries, reflecting the full spectrum of academic fields. Based on intensive face-to-face debate and consultation of stakeholders and anchored in academic literature and wide experience.

As a result, general (overarching) state-of-the-art reference frameworks have been prepared for the associated degree, bachelor, master and doctorate, as well as aligned qualifications reference frameworks and more detailed learning outcomes/assessment frameworks for 11 subject areas, offering a sound basis for quality assurance. As a follow-up, actual assessment formats for five academic fields have been developed to allow for measuring the actual level of learning at the institutional level from a comparative perspective.

Frameworks as well as assessment models and items are highly innovative, content-wise as in the strategy of development, involving renown academics finding common ground. Its value is not limited to Europe but has global significance. The model developed, is also relevant for micro-credentials in defining levels of mastery.

Education to an international standard that can provide successful careers has arguably been the main drive of many parents to allocate scarce financial resources to the education of their progenies. Competition for high-calibre degrees has seen an explosion of opportunity in the private education sector. As many Global South countries do not have the equivalent control of standards provided in the United Kingdom (UK) by the Quality Assurance Agency, this can lead to dissatisfaction with the qualifications received in the Global South. This chapter aims to explore the factors influencing participation in higher education in the Global North versus the Global South, particularly where these relate to or vary by locality, and the relative influence these have on the propensity of the learners living in these areas to progress into higher education in local universities. The conceptual framework and methodology provided in this chapter show the differences between transnational education (TNE) as primarily a standalone or independent activity supported by a UK higher education institution (HEI)/provider versus being a collaborative effort between a UK host university and a South/Southeast Asian HEI university partner. The methodology provides a strategy for UK host institutions to best provide carefully aligned independent or collaborative partnerships with the partner country regulatory bodies. The chapter concludes with the author’s personal reflections and recommendations based on decades of collaborative and independent university provision of TNE. These reflections are focused on design-based courses in selected South/Southeast Asian HEI partnerships with the College of Architecture and Design at Birmingham City University.

Organisational strategy becomes reality by connecting organisation’s resources and capabilities in daily operations, and physical workspace is one of the environments in which this takes place. This study aims to explore to what extent factors required for successful strategy implementation are considered when designing, using and managing workspaces of knowledge-intensive organisations.

For the study, managers in 25 large and medium-sized knowledge-intensive organisations were interviewed. The semi-structured interviews focused on organisation’s strategy, strategy implementation practices and workspace design and management. To form a comprehensive framework of strategy implementation success factors for the study, the factors of 11 frameworks were analysed, grouped and renamed.

Current workspace design, usage and management mainly support human-related strategy implementation factors. However, both organisation- and human-related factors are needed for the strategy implementation to be successful. Therefore, the organisations studied may have unused potential in their workspaces to ensure strategy-aligned operations and behaviour.

Due to the potential imbalance between organisation- and human-related strategy implementation factors, a more holistic, organisational-level approach to workspace design, usage and management is recommended to ensure the success of strategy implementation.

Workspaces have extensively been studied from individual strategy implementation factors’ as well as employees’ perspectives. Prior to this work, there are only few studies exploring workspace in the holistic, strategy implementation context.

Carpal tunnel syndrome (CTS) is a hand disease caused by the pressing of the median nerve present in the palmar side of the wrist. It causes severe pain in the wrist, triggering disturbance during sleep. Different products like splints, braces and gloves are available in the market to alleviate this disease but there was still a need to improve the wearability, comfort and cost of the product. This study was about designing a comfortable and cost-effective wearable system for mild-to-moderate CTS. Transcutaneous electrical nerve stimulation (TENS) therapy has been used to reduce the pain in the wrist.

After simulation by using Proteus software (which allowed the researchers to draw and simulate electrical circuits using ISIS, ARES and PCB design tools virtually), the circuit with optimum frequency, i.e. 33 Hz was selected, and the circuit was developed on a printed circuit board (PCB). The developed circuit was integrated successfully into the half glove structure.

The developed product had good thermophysiological comfort and hand properties as compared to the commercially available product of the same kind. In vivo testing (It involves the testing with living subjects like animals, plants or human beings) was performed which resulted in 85% confirmed viability of the product against CTS. A glove with an integrated circuit was developed successfully to accommodate various sizes without any sex specifications in a cost-effective way to mitigate the issue of CTS.

Industrial workers, individuals frequently using their hands or those diagnosed with CTS may wish to use this product as therapy. The attention could not be paid to the aesthetic or visual appeal of the developed product.

A very comfortable glove with integrated TENS electrodes was developed successfully to accommodate various sizes without any sex specifications in a cost-effective way to mitigate the issues of CTS.

This study of job advertisements for internal communication practitioners aims to investigate the signals that organisations are sending the profession about what is required of these roles. The concept of corporate voice – the “voice” of the organisation – is problematised to explore tensions in vocality. The aim is to support communication practitioners to navigate multi-vocality in the evolving professional context of digital communication technologies and changes in the workplace.

This qualitative study considers the role of voice in corporate communication practices and offers insights into “digital disruption” and the discursive pressure of employers' priorities on the profession and its practices. Job advertisements for internal communication practitioners were examined during 6-month periods in 2018, 2020 and 2022, which was a significant time of change for the profession with the global COVID-19 pandemic.

Qualitative content analysis of 514 internal communication job advertisements identifies that control and consistency are valorised, and continue to dominate descriptions of internal communication skills and responsibilities. The digital affordances that communication practitioners rely on has not changed significantly and a preference for “broadcasting” is evident.

This study provides insights into how Australian organisations shape and sustain univocal corporate communication practices, and the incompatibility of narrow configurations of voice with emerging organisational challenges such as social connectedness.

This paper aims to identify the relevant contributing constructs of readiness for the implementation of intelligent contracts (iContracts) in the construction industry. This study investigates the relationship between the personality dimensions of technology readiness index (TRI) and the system specific factors of technology acceptance model (TAM) within the context of iContracts.

Drawing insights from the extant literature and the author's previous qualitative investigations into iContract readiness constructs, a quantitative approach is used to operationalise the constructs by offering relevant statements to be measured and validated through a multiple-item scale against the users intent to accept the future iContract technology.

This study confirms and validates the relationship of the proposed iContract readiness index (iCRI) statements against the established TAM factors by offering 18 new constructs influencing technology readiness of the iContract technology. This study proves 9 of the 12 hypotheses highlighting key factors to be addressed for the successful development of the iContract technology.

This paper contributes to the body of knowledge by proposing a novel iCRI that informs an iContract technology readiness acceptance model (iCTRAM) for a trending technology. The iCTRAM can guide developers in producing an appropriate iContract solution and assess the readiness of users and organisations for the successful adoption of the iContract concept.

This study offers a unique theoretical framework, in an embryonic field, for predicting the success of iContract implementation within construction organisations. This study combines the established studies of TRI and TAM in producing a predictive iContract readiness assessment tool.

This study aims to increase the novelty of clothing design and fabric texture. The element library that can be used for design is systematically summarized. The element database can also be continuously filled according to the existing logic to realize the diversity of design. Improve the theory of fashion design, expand the designer's design ideas and improve design efficiency. Clear design steps and logic can help students and machines learn the design process and promote the development of intelligent design. And verify the feasibility of the simulation software to assist pleated clothing design.

Firstly, according to the logical framework of origami theory, different innovative designs and combined designs are made for the basic units of hyperbolic paraboloid, and the element library that can be used for design is systematically summarized. This database can also be continuously filled according to the existing logic to realize the diversity of design. Secondly, it summarizes three methods of pleated element filling clothing – uniform filling method, the irregular filling method and geometric addition method – that improve the theory of fashion design, expand the designer's design ideas and improve design efficiency. Clear design steps and logic can help students and machines learn the design process and promote the development of intelligent design. Finally, the virtual software is used to simulate the effect of pleated clothing, and the three-dimensional simulation software 3dclo is used to make an empirical study on the application of hyperbolic paraboloid origami in clothing pleated design to verify the feasibility of the simulation software to assist pleated clothing design.

The theoretical results of hyperbolic paraboloid origami are collected and arranged to establish the element library of hyperbolic paraboloid origami. The results expand the designer's design ideas and auxiliary design technology and improve the design efficiency using a sample of hyperbolic paraboloid fabric to verify its practicability and three-dimensional clothing simulation software for exploring the design. The design rules of hyperbolic paraboloid clothing and the realization method of fabric are summarized, including the expansion and combing of elements, the application of size and shape and the method of combination.

Owing to the hyperbolic paraboloid origami’s length shrinkage, the loose computation of clothing requires targeted computation. This paper solely applies a paper model for estimating the shrinkage, and then we tend to subsequently explore the way to precisely compute the porosity, to determine the existing differences in the two-dimensional shrinkage of hyperbolic paraboloid creases of varying materials and to know if the clothing after large-scale production is capable of reaching the anticipated value.

The exploration of this experiment brings a new 3D experiment process to the design process.

This experiment brings new possibilities for the development of virtual fitting and virtual display in the industry.

This study combines hyperbolic paraboloid origami and clothing and combs and expands the unit with logical thinking to expand the designer's design ideas.