Search results

The purpose of this study aims to synthesize a novel donor–acceptor dye based on phenothiazine as a donor (D) and nonconjugated spacer was devised and synthesized by condensing of 2,2'-(1H-indene-1,3(2H)-diylidene) dimalononitrile with aldehyde and the practical synthesis methodology as given in Scheme 1.

The prepared phenothiazine dye was systematically experimentally and theoretically examined and characterized using nuclear magnetic resonance spectroscopy (1H,13C NMR), Fourier-transform infrared spectroscopy (IR) and high-resolution mass spectrometry. Density functional theory (DFT) and time-dependent density functional theory DT-DFT calculations were implemented to determine the electronic properties of the new dye

The UV-Vis absorption and fluorescence spectroscopy of the synthesized dye was investigated in a variety of solvents with varying polarities to demonstrate positive solvatochromism correlated with intramolecular charge transfer (ICT). The probe’s quantum yields (Фf) are experimentally measured in ethanol, and the Stokes shifts are found to be in the 4846–9430 cm⁻¹ range.

The findings depicted that the novel (D-π-A) chromophores may act as a significant factor in the organic optoelectronics.

This study aims to assess the effect of water variation on bioethanol production from cassava peels (CP) using Saccharomyces cerevisiae yeast as the ethanologenic agent.

The milled CP was divided into three treatment groups in a small-scale flask experiment where each 20 g CP was subjected to two-stage hydrolysis. Different amount of water was added to the fermentation process of CP. The fermented samples were collected every 24 h for various analyses.

The results of the fermentation revealed that the highest ethanol productivity and fermentation efficiency was obtained at 17.38 ± 0.30% and 0.139 ± 0.003 gL⁻¹ h⁻¹. The study affirmed that ethanol production was increased for the addition of water up to 35% for the CP hydrolysate process.

The finding of this study demonstrates that S. cerevisiae is the key player in industrial ethanol production among a variety of yeasts that produce ethanol through sugar fermentation. In order to design truly sustainable processes, it should be expanded to include a thorough analysis and the gradual scaling-up of this process to an industrial level.

This paper is an original research work dealing with bioethanol production from CP using S. cerevisiae microbe.

1. Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

2. Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

3. Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

4. Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

The purpose of the article is to identify relevant criteria for decision support in the implementation of waste-to-energy (WtE)-based systems.

The methodology is a simple case study with a qualitative approach. Five experts involved in the project of a thermoelectric power plant qualitatively evaluated, on a Likert scale, a decision model with 15 indicators derived from recent studies. The research object was the first stage of a project to implement a thermoelectric plant employing municipal solid waste (MSW) in southern Brazil.

The study identified 15 criteria supporting the decision-making process regarding WtE implementation for MSW in a mid-sized city in southern Brazil. The study identified that compliance with MSW legislation, compliance with energy legislation, initial investment and public health impact are the most influential criteria. The study offered two models for decision processes: a simplified one and a complete one, with ten and fifteen indicators, respectively.

The study concerns mid-sized municipalities in southern Brazil.

Municipal public managers have now a methodology based on qualitative evaluation that admits multiple perspectives, such as technical, economic, environmental and social, to support decision-making processes on WtE technologies for MSW.

MSW management initiatives can yield jobs and revenues for vulnerable populations and provide a correct destination for MSW, mainly in developing countries.

The main originality is that now municipal public decision-makers have a structured model based on four constructs (technical, economic, environmental and social) deployed in 15 indicators to support decision-making processes involving WtE and MSW management.

Waiting for a bus may represent a period of intense exposure to traffic particles in hot and noisy conditions in the street. To lessen the particle load and tackle heat in bus stops a shelter was equipped with an electrostatic precipitator and a three-step adiabatic cooling system capable of dynamically adjust its operation according to actual conditions. This study evaluates the effectiveness of the Airbitat Oasis Smart Bus Stop, as the shelter was called, to provide clean and cool air.

The particle exposure experienced in this innovative shelter was contrasted with that in a conventional shelter located right next to it. Mass concentrations of fine particles and black carbon, and particle number concentration (as a proxy of ultrafine particles) were simultaneously measured in both shelters. Air temperature, relative humidity and noise level were also measured.

The new shelter did not perform as expected. It only slightly reduced the abundance of fine particles (−6.5%), but not of ultrafine particles and black carbon. Similarly, it reduced air temperature (−1 °C), but increased relative humidity (3%). Its operation did not generate additional noise.

The shelter's poor performance was presumably due to design flaws induced by a lack of knowledge on traffic particles and fluid dynamics in urban environments. This is an example where harnessing technology without understanding the problem to solve does not work.

It is uncommon to come across case studies like this one in which the performance and effectiveness of urban infrastructure can be assessed under real-life service settings.

This paper aims to focus on the synthesis of the macrocyclic complexes (Cu and Zn) and their applications as anticorrosive materials in epoxy paint formulation for surface coating application.

A selected macrocyclic Cu(II) and Zn(II) complexes were prepared via template synthesis and characterized using Fourier transform infrared, thermal gravimetric analysis, scanning electron microscope, flexibility, hardness and adhesion of coating films prepared using epoxy paint.

The corrosion resistance of the epoxy-painted films was improved due to the incorporation of the Zn and Cu complexes into the formulation.

It was found that the metal complex-based formulation with Cu(II) and Zn(II) had outperformed the sample blank.

The purpose of this article is to provide information about interactions between pink-pigmented facultative methylotroph (PPFM) organisms and plants, their molecular mechanisms of methylotrophic metabolism, application of PPFMs in agriculture, biotechnology and bioremediation and also to explore lacuna in PPFMs research and direction for future research.

Research findings on PPFM organisms as potent plant growth promoting organisms are discussed in the light of reports published by various workers. Unexplored field of PPFM research are detected and their application as a new group of biofertilizer that also help host plants to overcome draught stress in poorly irrigated crop field is suggested.

PPFMs are used as plant growth promoters for improved crop yield, seed germination capacity, resistance against pathogens and tolerance against drought stress. Anti-oxidant and UV resistant properties of PPFM pigments protect the host plants from strong sunshine. PPFMs have excellent draught ameliorating capacity.

To meet the ever increasing world population, more and more barren, less irrigated land has to be utilized for agriculture and horticulture purpose and use of PPFM group of organisms due to their draught ameliorating properties in addition to their plant growth promoting characters will be extremely useful. PPFMs are also promising candidates for the production of various industrially and medicinally important enzymes and other value-added products. Wider application of this ecofriendly group of bacteria will reduce crop production cost thus improving economy of the farmers and will be a greener alternative of hazardous chemical fertilizers and fungicides.

Graphicalabstract:

Manufacturing companies continue to encounter a diverse set of obstacles while embracing sustainable development goals. Accordingly, the purpose of this study is to explore critical sustainable development-related barriers to flexible packaging manufacturing companies in the New Zealand context.

Drawing on a qualitative multiple case studies approach, the authors collected data from the New Zealand flexible packaging industry. Semistructured interviews were conducted with the senior corporate managers in two large flexible packaging companies. Following the thematic analysis approach, the authors analyzed the information collected from the participants and synthesized our findings under the key dimensions of internal and external barriers to sustainable development.

The findings revealed that internal barriers to sustainable flexible packaging are linked to economic, operational and technical issues. Conversely, external barriers include global crises and disruption, customer behavior and preferences and institutional and infrastructural-related aspects. Based on the analysis of empirical findings, the authors further identified the underlying reasons for sustainable flexible packaging barriers and recommended guidelines that could assist corporate managers and policymakers in addressing obstacles inhibiting the flexible packaging industry from adopting sustainable business practices.

The authors argue that this study is one of the early studies to consider inhibiting factors to incorporate sustainable development into the New Zealand flexible packaging industry context. Building on a range of theoretical perspectives, the authors extend the current body of knowledge seeking to advance the sustainable development agenda in the New Zealand flexible packaging industry and offer recommended pathways fostering sustainable development in a distinctive manufacturing context.

Three-dimensional (3D) printing is popular for many applications including the production of photocatalysts. This paper aims to focus on developing of 3D-printed photocatalyst-nano composite lattice structure. Digital light processing (DLP) 3D printing of photocatalyst composites was performed using photosensitive resin mixed with 0.5% Wt. of TiO₂ powder and varying amounts (0.025% Wt. to 0.2% Wt.) of graphene nanoplatelet powder. The photocatalytic efficiency of DLP 3D-printed photocatalyst TiO₂ composite was investigated, and the effects of nano graphite powder incorporation on the photocatalytic activity, thermal and mechanical properties were investigated.

Methods involve 3D computer-aided design modeling, printing parameters and comprehensive characterization techniques such as structural equation modeling, X-ray diffraction, thermogravimetric analysis, Fourier-transform infrared (FTIR) and mechanical testing.

Results highlight successful dispersion and characteristics of TiO₂ and graphene nanoplatelet (GNP) powders, intricate designs of 3D-printed lattice structures, and the influence of GNPs on thermal behavior and mechanical properties.

The study suggests applicability in wastewater treatment and environmental remediation, showcasing the adaptability of 3 D printing in designing effective photocatalysts. Future research should focus on practical applications and the long-term durability of these 3D-printed composites.

The occupational health risk associated with the production of prefabricated concrete components is often overlooked. This paper will use a damage assessment and cyclic mitigation (DACM) model to provide individualized exposure risk assessment and corresponding mitigation management measures for workers who are being exposed.

The DACM model is proposed based on the concept of life cycle assessment (LCA). The model uses Monte-Carlo simulation for uncertainty risk assessment, followed by quantitative damage assessment using disability-adjusted life year (DALY). Lastly, sensitivity analysis is used to identify the parameters with the greatest impact on health risks.

The results show that the dust concentration is centered around the mean, and the fitting results are close to normal distribution, so the mean value can be used to carry out the calculation of risk. However, calculations using the DACM model revealed that there are still some work areas at risk. DALY damage is most severe in concrete production area. Meanwhile, the inhalation rate (IR), exposure duration (ED), exposure frequency (EF) and average exposure time (AT) showed greater impacts based on the sensitivity analysis.

Based on the comparison, the DACM model can determine that the potential occupational health risk of prefabricated concrete component (PC) factory and the risk is less than that of on-site construction. It synthesizes field research and simulation to form the entire assessment process into a case-base system with the depth of the cycle, which allows the model to be continuously adjusted to reduce the occupational health damage caused by production pollution exposure.

The purpose of this study is to investigate the influence of light intensity and sources of carbon and nitrogen on the cultivation of Spirulina maxima.

Cultures were carried out in a modified Zarrouk medium using urea, sodium acetate and glycerol. A Taguchi experimental design was used to evaluate the effect on the production of biocompounds: productivities in biomass, carbohydrates, phycocyanin and biochar were analyzed.

Statistical data analysis revealed that light intensity and sodium acetate concentration were the most important factors, being significant in three of the four response variables studied. The highest productivities in biomass (46.94 mg.L⁻¹.d⁻¹), carbohydrates (6.11 mg.L⁻¹.d⁻¹), phycocyanin (3.62 mg.L⁻¹.d⁻¹) and biochar (22, 48 mg.L⁻¹.d⁻¹) were achieved in experiment 4 of the Taguchi matrix, highlighting as the ideal condition for the production of biomass, carbohydrates and phycocyanin.

Sodium acetate and urea can be considered, respectively, as potential sources of carbon and nitrogen to increase Spirulina maxima productivity. From the results, an optimized cultivation condition for the sustainable production of bioproducts was obtained.

This work focuses on the study of the influence of light intensity and the use of alternative sources of nitrogen and carbon on the growth of Spirulina maxima, as well as on the influence on the productivity of biomass and biocompounds. There are few studies in the literature focused on the phycocyanin production from microalgae, justifying the need to deepen the subject.