Search results

The roofs of houses located at middle latitudes receive significant solar radiation useful to supply their own energy demands and to feed back into the urban electricity network. However, solar panels should be properly integrated into roofs. This study analyzed roof geometry and integrated solar performance of Photovoltaic, thermal-photovoltaic, and hybrid solar collection technologies on dwelling cases selected from a sample of recent housing developments in Concepción, Chile. Hour-by-hour energy generation estimates and comparisons with demand levels were calculated for representative days during seasons of maximum, minimum as well as mid-season. These estimates took into account the roof tilt and orientation effects also. Trnsys@ software was used to determine electricity supply and F-Chart tool for thermal energy supply. The results show five times more panels can be placed on the largest and most regular shaped roof sections than on those with the smallest and most irregular shapes. The house model with the largest roof section can provide up to six times more energy than the model with the smallest second roof section in different seasons and systems. This paper thus provides new findings on the performance of solar technologies when related to home energy demands and roof geometry.

The purpose of this study was to prepare colour pigments for use as spectrally selective coatings for solar absorbers.

Nano-particles cobalt and nickel oxides were prepared by sol–gel techniques. These oxides were prepared with its molar ratios and annealed at 200, 400, 600 and 800°C. The structure of the pigments was characterized by infrared spectrometer, differential scanning calorimetry analysis, X-ray diffraction, transmission electron microscope and scanning electron microscope.

Encapsulated cobalt and nickel oxides were completely formed at 800 and 600°C, and its colour was black and dark green, respectively. The results confirmed that black and green pigments combined selectivity with colour. Optical properties such as absorption and reflection were affected by the firing temperatures on cobalt and nickel oxides–gel polymers. All synthesized pigments consisted of nano-particles.

The prepared samples used in the present work were synthesized from cobalt chloride and nickel acetate. The salts were dispersed in polyacrylamide as a precursor.

The prepared metal oxides had good solar properties.

Colour becomes more important for thermal solar collectors, and it has attracted interest. This might be related to a generally growing attention towards architectural integration of solar energy systems into building. Architects would prefer different colours besides black, even if lower efficiency would have to be accepted.

To cover the main contributions and developments in solar thermal collectors through focusing on materials, heat transfer characteristics and manufacturing challenges.

A range of published papers and internet research including research work on various solar thermal collectors (flat plate, evacuated tubes, and heat pipe tube) were used. Evaluation of solar collectors performance is critiqued to aid solar technologies make the transition into a specific dominant solar collector. The sources are sorted into sections: finding an academic job, general advice, teaching, research and publishing, tenure and organizations.

Provides information about types of solar thermal collectors, indicating what can be added by using evacuated tube collectors instead of flat plate collectors and what can be added by using heat pipe collectors instead of evacuated tubes.

Focusing only on three types of solar thermal collectors (flat plate, evacuated tubes, and heat pipe tube).

Useful source of information for consultancy and impartial advice for graduate students planning to do research in solar thermal technologies.

This paper fulfils identified information about materials and heat transfer properties of materials and manufacturing challenges of these three solar thermal collectors.

This paper aims to discuss the nexus between two societal (sub) systems of housing and energy supply to shed new light on the key institutional barriers to socio-technical energy transition in the built environment. The key research question is to explore if and how key patterns of institutional elements associated with energy retrofit and energy supply are combined, co-evolved and played out in the housing system, leading to an alternative energy transition pathway in the built environment.

A comparative case study of residential buildings in the Swiss cities of Basel and Sion is conducted to map retrofitting policies and practices in a wide range of buildings (e.g. multi-family and single family) that each requires a particular constellation of institutions, actors and artefacts.

The key finding is that the regulative institutions support energy transition in each urban form/housing type. However, the co-evolution with normative and cultural-cognitive institutions does not play out very clearly in the housing system. One reason is that the norms and cultures are deeply rooted in the practices exercised by business community and households and therefore they need a longer time frame to adapt to a new regulation.

The policies and actions to increase the rate of housing retrofit are discussed in the specific socio-political context of Switzerland. Therefore, the results of this study might not be applied in other contexts with different conditions, limiting the possibility for analytical generalization. The case study can generate only context-specific knowledge, which might be valuable only to cities with similar conditions. This paper addresses theoretical, methodological and policy challenges in scaling-up retrofit projects by taking a holistic and integrated approach to the systems of housing and energy supply.

It would have been necessary to find out how the introduction and enforcement of new energy policies and regulations (regulative institutions) have changed the norms and building practices (normative institutions) used by actors from housing industry and the attitudes and energy consumption behaviour of the households (cultural-cognitive institutions). Nevertheless, information about normative and cultural-cognitive institutions require more primary data in the form of interviews with organizations and households, respectively, which goes beyond the scope and resources of this study.

Insights from different strands of literature (institutions and sustainability transition) are combined to understand if and how retrofitting practices go along with other elements of urban sustainability including architectural, technical, socio-cultural and economic factors.

The ventilation and air-conditioning systems consume the highest energy in the building sector. The proper ventilation in residential buildings through the passive solar systems can substantially reduce the energy consumption in building sector. The paper aims to identify the application of wind shaft as a solar chimney, a passive ventilation system and evaluated the performance of the system.

The paper investigated the performance of the solar chimney with size, absorber area 9.76 m2 and height 4.57 m, based on experimental data recorded in the city, Kota (25°10N, 75°52E), India. Solar data were recorded using the state of the art weather station situated very closer to the residence. The air velocity and temperatures in the chimney and in the building are recorded in data logger. A simple mathematical model was used for the evaluation of the air change per hour (ACH) in the residential building.

From the analysis of weather data, it was found that the ambient temperature varies linearly with the solar irradiance. Air change rate of 5.7-7.7 can be achieved from this solar chimney, in peak summer season which is appropriate and meets the ventilation requirement as per BIS (Handbook of Functional Requirements of Buildings – 1987).

The air temperature increases from bottom to top in the solar chimney. The solar irradiance dictates the chimney air temperature, and both are in step with each other. It shows that the solar chimney is working in tune with the solar radiation availability. In peak summer, it provides sufficient ACH to the tune of 3-6. Resulting wind shaft can act effectively as a solar chimney. It is a feasible solution for the ventilation needs and it improves the looks of any residential building.

The purpose of this paper is to remark the importance of sustainable technologies in the façade renewal of existing buildings in order to fit their energetic performance to different climatic inputs, following the new European Energy Standards for energy savings.

Technical data and typical examples of upgrading interventions in the direction of the passive solar gaining, natural cooling and other relevant sustainable technologies for building envelopes are presented and critically examined.

The energy failure in existing buildings is mainly due to the poor insulating efficiency of the façades. Making use of hi‐tech envelopes, not only the energetic balance, but also the architectural value of a building can be improved.

Architects and builders can use the advices from this study in determining the advantages of up‐to‐date technologies in the enhancement of the energetic performance of buildings.

Examples presented in this paper indicate how sustainable technologies, that are commonly used in new constructions where the concept starts from a low‐environmental impact, can be also employed in the refurbishment of existing buildings, which is the main challenge for the global reduction of CO₂. An overview on the main technical of intervention can indicate to architects and planners the potentiality for the improvement of the existing buildings, in order to reduce the overall energy balance.

CasaZeroEnergy is the prototype for a building that does not use energy produced from non-renewable sources, but produces its require energy by using alternative energetic systems. Designed according to the principles of bioclimatic architecture, the building was integrated with passive systems for optimizing the site's climatic conditions for heating in winter and for cooling and ventilation in summer. The house was constructed with natural, renewable, recycled and recyclable materials. For this reason it can be classified as a “natural building”. Its main feature is the integration between the building and the alternative systems in order to produce energy from renewable sources: sunspace, solar collectors, photovoltaic panels, a geothermal system and a pellet boiler system. Home automation manages all the mechanical systems to ensure comfort and reduced energy consumption at the same time. The sunspace is a passive solar system used mainly for heating indoor spaces during the winter season. The building's cooling system is based on natural ventilation strategies and on geothermal heat pumps. The building is provided with shading systems. A smart system was devised to guarantee user safety and security. This kind of system can be controlled remotely and provides constant security for the building.

The use of renewable energy has become necessary because of the harmful effects of current energy sources on the environment, limited availability and financial crisis. Transparent solar panels have emerged as a promising technology for integrating renewable energy generation into building structures. Therefore, this paper aims to explore the feasibility of transparent solar panels for high-rise building façades in Sri Lanka.

The research apprehended a qualitative approach, including two expert interview rounds adhering to the Delphi technique with 17 and 15 experts each per round. Manual content analysis was incorporated to analyse the collected data.

Regarding operation and maintenance, the study emphasizes the importance of regular inspection, cleaning and repair of transparent solar panels to ensure optimal performance and longevity. These activities contribute to maximizing energy generation and maintaining the aesthetic appeal of the building. The benefits of implementing transparent solar panels on building façades are manifold. They include renewable energy generation, reduced greenhouse gas emissions, improved energy efficiency and enhanced architectural aesthetics. Furthermore, the research findings underscore the potential of transparent solar panels to contribute to Sri Lanka’s sustainable development goals and address the country’s increasing energy demand. However, the study also identifies challenges that need to be addressed for successful implementation.

This study contributes to understanding the feasibility of transparent solar panels for high-rise building façades in Sri Lanka. The research findings offer valuable insights into the operation and maintenance aspects, benefits, challenges and strategies for implementing transparent solar panels effectively. This knowledge can guide policymakers, architects and developers in making informed decisions regarding the integration of transparent solar panels, thereby promoting sustainable and energy-efficient building practices in Sri Lanka.

This paper presents the Latitude Housing System, a speculative model for a means of imagining multi-scalar nested considerations for the development of a mass-customized net energy producing housing system geared to the specific conditions of the Great Lakes region in North America. In the most general sense, the project is motivated by an attempt to frame the discussion of such housing beyond its energy performance alone, and expand by implication, the ways in which we might discuss and debate approaches to the design and delivery of sustainable housing. Considerations that range from regional economic synergies and models of clean-tech collaborations to behaviour shaping building controls systems are presented and briefly outlined as they are applied to a constructed proof of concept prototype, North House, which is based on the Latitude system.

The objective is to provide a quantitative insight on the dynamic nature of insolation on the building perimeter according to location, season and orientation. Such understanding is necessary for deciding on solar control strategies in diverse climatic environments, from low to high availability of insolation.

This study explores the seasonal changes of solar irradiation on building façades of various orientations at five locations with diverse climates (Reykjavík, London, Athens, Riyadh, Lagos). Solar data collected from the European PVGIS database is used to study the monthly distribution of global solar radiation incident on building façades at cardinal and ordinal orientations, as well as the proportions of its components.

The results illuminate the effects of the various factors on insolation. Among others: In all locations, horizontal surfaces receive more annual irradiation than any façade. In summer, east/west facades receive more radiation than south, hence solar protection on those directions is more important than on south. The beam fraction varies seasonally on south and north facades, but not so on east/west. Local atmospheric conditions can offset the importance of latitude on insolation levels and composition.

The paper utilises commonly available data to correlate insolation values and types under different factors across the globe, offering a better understanding on insolation for the design of greener buildings.