Search results

In wireless communication system, use of multiple antennas for different requirements of system will increase the system complexity. However, reconfigurable antenna is maximizing the connectivity to cover different wireless services that operate different frequency range. Pattern reconfigurable antenna can improve security, avoid noise and save energy. Due to their compactness and better performance at different applications, reconfigurable antennas are very popular among the researchers. The purpose of this work, is to propose a novel design of S-shaped antenna with frequency and pattern diversity. The pattern and frequency reconfiguration are controlled via ON/OFF states of the PIN diode.

The geometrical structure of the proposed antenna dimension is 18 × 18 × 0.787 mm³ with εr = 2.2 dielectric constant. Three S-shaped patches are connected to a ring patch through PIN diodes. The approximate circumference of ring patch is 18.84 mm and length of patch is 5 mm, so approximate length of radiating patch is 14.42 mm and effective dielectric constant is 1.93. Conductor backed coplanar waveguide (CPW) is used for feeding. The proposed antenna is designed and simulated on CST microwave studio and fabricated using photolithography process. Measurements have been done in anechoic chamber.

Antenna shows the dual band operation at 2.1 and 3.4 GHz frequency. The first band remains constant at 2.1 GHz resonant frequency and 200–400 MHz impedance bandwidth. Second band is switched at seven different resonant frequencies as 3.14, 3.45, 3.46, 3.68, 3.69, 3.83 and 3.86 GHz with switching of the diodes. The −10 dB bandwidth is more than 1.4 GHz.

Pattern reconfigurability can be achieved using mechanical movement of antenna easily but it is not a reliable approach for planar antennas. Electronic switching method is used in proposed antenna. Antenna size is very small so fabrication is very crucial task. Measured results are deviated from simulation results due to fabrication error and effect of leads of diodes, connecting wires and battery.

The reconfiguration of the proposed antenna is controlled via ON/OFF states of the three PIN diodes. The lower band of 2.1 GHz is fixed, while second band is switched at five different resonant frequencies as 3.27, 3.41, 3.45, 3.55 and 3.88 GHz, with switching of the PIN diodes with all state of diodes and exhibit pattern reconfigurability at 2.1 GHz frequency. At second band center frequency is significantly changed with state of diodes and at 3.4 GHz pattern is also changed with state of diodes, hence antenna exhibits frequency and pattern reconfigurability.

A novel design of pattern and frequency reconfigurable antenna is proposed. Here, work is divided into two parts: first is frequency reconfiguration and second is radiation pattern reconfiguration. PIN diodes as switch are used to select the frequency band and reconfigure the radiation pattern. This proposed antenna design is novel dual band frequency and pattern reconfigurable antenna. It resonates at two distinct frequencies, i.e. 2.1 and 3.4 GHz, and has a pattern tilt from 0° to 355°. The conductor backed CPW feed technique is used for impedance matching.

The purpose of this study is to design a radio altimeter antenna whose production process is facilitated and can work with multiple-input multiple-output (MIMO) properties to provide space gain on the aircraft.

To create an easy-to-produce MIMO, a two-storied structure consisting of a reflector and a top antenna was designed. The dimensions of the reflector were prevented to get smaller to supply easy production. The unit cell nearly with the same dimensions of a lower frequency was protected through the original cell design. The co-planar structure with the use of a via connection was modified and a structure was achieved with no need to via for easy production, too. Finally, the antennas were placed side by side and the distance between them was optimized to achieve a MIMO operation.

As a result, an easy-to-produce, compact and successful radio altimeter antenna was obtained with high antenna parameters such as 10.14 dBi gain and 10.55 dBi directivity, and the conical pattern along with proper MIMO features, through original reflector surface and top antenna system.

Since radio altimeter antennas require high radiation properties, the microstrip antenna structure is generally used in literature. This paper contributes by presenting the radio altimeter application with antenna-reflective structure participation. The technical solutions were developed during the design, focusing on an easy manufacturing process for both the reflective surface and the upper antenna. Also, the combination of International Telecommunication Union’s recommended features that require high antenna properties was achieved, which is challenging to reach. In addition, by operating the antenna as a successful MIMO, two goals of easy production and space gain on aircraft have been attained at the same time.

This study aims to design a compact filtering monopole antenna for 5G communication. The design is most suited for various applications within the frequency range of 2.2–3.8 GHz. It offers enhanced bandwidth and reasonable gain with wide-stopband performance.

A low-pass filter (LPF) of complementary split ring resonator (CSRR) with short-circuited stub lines is integrated with a compact defected coplanar waveguide fed truncated circular monopole ultrawideband (UWB) antenna. The reference UWB antenna etched on an FR4 substrate was coupled to the designed LPF to transform the UWB antenna into a wideband antenna. The effect of coupling is analyzed based on the real and imaginary responses of the terminal impedance (ZT) curve. Three short-circuited stub lines of asymmetric lengths are added to the CSRR LPF to suppress harmonics, thereby enhancing the stopband performance and impedance matching between the elements. The proposed filtering antenna is fabricated using a photolithography process, and the corresponding results are measured using a network analyzer (N9951A). The radiation parameters of the proposed filtering monopole antenna are tested in the anechoic chamber. The simulated/measured results are compared and are found in agreement with each other.

The proposed design suppresses 6.5f0 harmonics, resulting in wide stopband performance and increased gain selectivity at the transition edge. A peak suppression of −41 dB and an average suppression of −18 dB were attained throughout the stopband. An operating fractional bandwidth of 54.5%/143% with a peak gain of 3 dBi/5 dBi was obtained. The proposed filtering antenna supports 5G applications such as WiMAX, WLAN, n7, n38 IMT-E, n30 WCS, n40 TDD, n41 TDD, n48 TDD, n78 TDD and n90 TDD.

The proposed design is novel and compact and has a wide application in 5G communication. With the filter, the antenna operates in wideband, and without the filter, it operates in UWB. Besides, it offers enhanced stopband performance with high gain selectivity at the transition edge. Comparatively, a 50% improvement in bandwidth, 52% improvement in size reduction and 33% improvement in harmonic suppression are attained.

This paper aims to propose a single element, dual feed, polarisation diversity antenna. The proposed antenna operates from 2.9 to 10.6 GHz for covering the entire ultra-wideband (UWB) frequency range. The antenna is designed for usage in massive multiple input multiple output (MIMO) and closed packaging applications.

The size of the antenna is 24 × 24 × 1.6 mm³. The radiating element of the antenna is derived from the Sierpinski–Knopp (SK) fractal geometry for miniaturization of the antenna size. The antenna has a single reflecting stub placed between the two orthogonal feeds, to improve isolation.

The proposed antenna system exhibits S₁₁ < −10 dB, S₂₁ < −15 dB and stable radiation characteristics in the entire operating region. It also offers an envelope correlation coefficient < 0.01, a diversity gain > 9.9 dB and a capacity loss < 0.4 bps/Hz. The simulated and measured outputs were compared and results were found to be in similarity.

The proposed UWB-MIMO antenna has significant size reduction through usage of SK fractal geometry for radiating element. The antenna uses a single radiating element with dual feed. The stub is between the antenna elements which provide a compact and miniaturized MIMO solution for high density packaging applications. The UWB-MIMO antenna provides an isolation better than −20 dB in the entire UWB operating band.

This paper aims to present the design, fabrication and analysis of a wideband, enhanced gain 1 × 2 patch antenna array with a simple profile structure to meet the desired antenna traits, such as wide bandwidth, high gain and directional patterns expected for the upcoming fifth-generation (5G) wireless applications in the millimeter wave band. To enhance these parameters (bandwidth and gain), a new antenna geometry by using a T-junction power divider is presented.

The theory behind this paper is connected with advancements in the 5G communications related to antennas. The methodology used in this work is to design a high gain array antenna and to identify the best possible power divider to deliver the power in an optimized way. The design methodology adopts several steps like the selection of proper substrate material as per the design specification, size of the antenna as per the frequency of operation and application-specific environment condition. The simulation has been performed on the designed antenna in the electromagnetic simulation tool (high-frequency structure simulator [HFSS]), and optimization has been done with parametric analysis, and then the final array antenna model is proposed. The proposed array contains 2-patch elements excited by one port adapted to 50 Ω through a T-junction power divider. The 1 × 2 array configuration with the suggested geometry helps to improve the overall gain of the antenna, and the implementation of the T-junction power divider provides enhanced bandwidth. The proposed array designed using a 1.6 mm thick flame retardant substrate occupies a compact area of 14 × 12.14 mm².

The prototype of the array antenna is fabricated and measured to validate the design concept. A good agreement has been reached between the measured and simulated antenna parameters. The measured results confirm its wideband and high gain characteristics, covering 24.77–28.80 GHz for S₁₁= –10 dB with a peak gain of about 15.16 dB at 27.65 GHz.

The proposed antenna covers the bandwidth requirements of the 26 GHz n258 band (24.25–27.50 GHz) to be deployed in the UK and Europe. The suggested antenna structure also covers the federal communications commission (FCC)-regulated 28 GHz n261 band (27.5–28.35 GHz) to be deployed in America and Canada. The low profile, compact size, simple structure, wide bandwidth, high gain and desired directional radiation patterns confirm the applicability of the suggested array antenna for the upcoming 5 G wireless systems.

The purpose of this paper is to present an up-to-date survey on the non-orthogonal multiple access (NOMA) technique with co-operative strategy, a fast-evolving fifth-generation (5 G) technology. NOMA is used for serving many mobile users, both in power and code domains. This paper considers the power-domain NOMA, which is now discussed as NOMA.

The first part of the paper discusses NOMA-based cooperative relay systems using different relay strategies over different channel models. In various research works, the analytical expressions of many performance metrics were derived, measured and simulated for better performance of the NOMA systems. In the second part, a brief introduction to diversity techniques is discussed. The multiple input and multiple output system merged with cooperative NOMA technology, and its future challenges were also presented in this part. In the third part, the paper surveys some new conceptions such as cognitive radio, index modulation multiple access, space-shift keying and reconfigurable intelligent surface that can be combined with NOMA systems for better performance.

The paper presents a brief survey of diverse research projects being carried out in the field of NOMA. The paper also surveyed two different relaying strategies that were implemented in cooperative NOMA over different channels and compared several performance parameters that were evaluated and derived in these implementations.

The paper provides a scope for recognizable future work and presents a brief idea of the new techniques that can be united with NOMA for better performance in wireless systems.

The purpose of this paper is to present a deep-learning-based beamforming method for phased array weather radars, especially whose antenna arrays are equipped with large number of elements, for fast and accurate detection of weather observations.

The beamforming weights are computed by a convolutional neural network (CNN), which is trained with input–output pairs obtained from the Wiener solution.

To validate the robustness of the CNN-based beamformer, it is compared with the traditional beamforming methods, namely, Fourier (FR) beamforming and Capon beamforming. Moreover, the CNN is compared with a radial basis function neural network (RBFNN) which is a shallow type of neural network. It is shown that the CNN method has an excellent performance in radar signal simulations compared to the other methods. In addition to simulations, the robustness of the CNN beamformer is further validated by using real weather data collected by the phased array radar at Osaka University (PAR@OU) and compared to, besides the FR and RBFNN methods, the minimum mean square error beamforming method. It is shown that the CNN has the ability to rapidly and accurately detect the reflectivity of the PAR@OU with even less clutter level in comparison to the other methods.

Motivated by the inherit advantages of the CNN, this paper proposes the development of a CNN-based approach to the beamforming of PAR using both simulated and real data. In this paper, the CNN is trained on the optimum weights of Wiener solution. In simulations, it is applied on a large 32 × 32 planar phased array antenna. Moreover, it is operated on real data collected by the PAR@OU.

The aim of this study is to determine the fracture behavior of wool felt and fabric based epoxy composites and their responses to electromagnetic waves.

Notched and unnotched tensile tests of composites made of wool only and hybridized with a glass fiber layer were carried out, and fracture behavior and toughness at macro scale were determined. They were exposed to electromagnetic waves between 8 and 18 GHz frequencies using two horn antennas.

The keratin and lignin layer on the surface of the wool felt caused lower values to be obtained compared to the mechanical values given by pure epoxy. However, the use of wool felt in the symmetry layer of the laminated composite material provided higher mechanical values than the composite with glass fiber in the symmetry layer due to the mechanical interlocking it created. The use of wool in fabric form resulted in an increase in the modulus of elasticity, but no change in fracture toughness was observed. As a result of the electromagnetic analysis, it was also seen in the electromagnetic analysis that the transmittance of the materials was high, and the reflectance was low throughout the applied frequency range. Hence, it was concluded that all of the manufactured materials could be used as radome material over a wide band.

Sheep wool is an easy-to-supply and low-cost material. In this paper, it is presented that sheep wool can be evaluated as a biocomposite material and used for radome applications.

The combined evaluation of felt and fabric forms of a natural and inexpensive reinforcing element such as sheep wool and the combined evaluation of fracture mechanics and electromagnetic absorption properties will contribute to the evaluation of biocomposites in aviation.

Reference voltage or current generators are an important requirement for an analog or digital circuit design. Bandgap reference circuits (BGR) are most common way of generating the reference voltage. This paper aims to provide a detailed insight of design of a folded cascode operational amplifier (FC op amp) and a BGR circuit. The complete study flow from design to layout of the circuits on 180 nm semiconductor laboratory (SCL) process leading to bonding diagram for possible tape-out is discussed. This study work has been supported by MeitY, Govt. of India, through Special Manpower Development Project Chip to System Design.

This paper provides a detailed insight in design of a FC op amp and a BGR circuit. The complete study flow from design to layout of the two circuits on 180 nm SCL process leading to bonding diagram for possible tape-out is discussed. Section 2 shows the design of FC op amp, beta-multiplier circuit and their simulation results. Section 3 describes the comparison of design of conventional BGR and the proposed BGR with other state-of-art BGR circuits. Section 4 gives the comparison of their performance. The conclusion is given in Section 5.

The post-layout simulation of FC op amp show an open-loop gain of 64.5 dB, 3-dB frequency of 5.5 KHz, unity-gain bandwidth of 8.7 MHz, slew rate of 8.4 V/µs, CMRR of 111 dB and power of 25.5µW. Among the two BGR designs, the conventional BGR generated 693 mV of reference voltage with a temperature coefficient of 16 ppm/°C the other BGR, with curvature correction generated 1.3 V of reference voltage with a temperate coefficient of 6.3 ppm/°C , both results in temperature ranging from −40°C to 125°C. The chip layout of the circuits designed on 180 nm SCL process ensures design rule check (DRC), Antenna and layout versus schematic (LVS) clean with metal fill.

Slew rate, stability analysis, power are important parameters which should be taken care while designing an op amp for a BGR. Direct current gain should be kept higher to reduce offset errors. Input common mode range is decided by the operating temperature range. A higher power supply rejection ratio will reduce BGR sensitivity to supply voltage variations. Input offset should be kept low to reduce BGR error in reference voltage. However, this paper emphasis on the flow from schematic to layout using simulation tools. As part of the study, the bonding diagram for tape-out of BGR and FC design in the given SCL frame size with seal ring is also explored, for possible tape-out.

Reference voltage or current generators are an important requirement for an analog or digital circuit design. BGR are most common way of generating the reference voltage. This paper provides a detailed insight in design of a FC op amp and a BGR circuit. The complete study flow from design to layout of the circuits on 180 nm SCL process leading to bonding diagram for possible tape-out is discussed. The chip layout of the circuits was designed on 180 nm SCL process ensuring DRC, antenna and LVS clean with metal fill using Cadence virtuoso and Mentor Graphics Calibre simulation tools.

BGR are most common way of generating the reference voltage. This paper gives a detailed insight of a BGR design using a folded-cascode operational amplifier. The FC op amp is biased using a beta multiplier circuit and high-swing cascode current mirror circuit. The paper discuss FC circuit design flow from schematic to layout.

FC op amp is biased using a beta multiplier circuit and high-swing cascode current mirror. The paper discusses FC design flow from schematic to layout. The circuits were designed on 180 nm SCL technology with 1.8 V of power supply. The post-layout simulation show an open-loop gain of 64.5 dB, 3 dB frequency of 5.5 KHz, unity-gain bandwidth of 8.7 MHz, slew rate of 8.4 V/µs, CMRR of 111 dB and power of 25.5 µW. BGR were designed using FC op amp. The proposed BGR generated 1.3 V of reference voltage with a temperature coefficient of 6.3 ppm/°C in the range from −40°C to 125°C in schematic simulation.

This paper aims to draw lessons for telecommunications (telecom) network deployment in India, from a study of policy and regulatory approaches taken by other federal administrations in streamlining processes for site clearances, grant of rights of way (RoW) and approvals for local infrastructure deployment and sharing. With the urgent need for setting up small cells and rapid fiberisation of networks in the 5G era, the importance of such processes has gained prominence.

The authors adopt qualitative thematic content analysis with three-tier coding and classification to identify themes in archival and current documentary data and information obtained from subject-matter experts in the countries studied.

Formulation and implementation of telecom policy is led by national governments. However, national telecom administrations, in recognition of new needs, have co-opted states and local authorities as partners in development of telecom networks, providing the overall framework, guidance and appropriate incentives where required.

This cooperative model could work well in India, where telecom policy making and regulation is the prerogative of the central government, but administration of RoW and local clearances for cable laying, tower siting and associated infrastructure activities for expanding telecom networks are left to decentralised decision-making in the states and local bodies.

This research attempts to sytematise, thematise and draw cross-country comparisons to inform regulatory and administrative policy for 5G infrastructure rollout in India.