Search results

Metamaterial unit cells composed of deep subwavelength resonators brought up new aspects to the antenna miniaturization problem. The paper experimentally demonstrates a metamaterial-inspired miniaturization method for circular patch antennas. In the proposed layouts, the space between the patch and the ground plane is filled with a proper metamaterial composed of either multiple split-ring or spiral resonators (SRs). The authors have manufactured two different patch antennas, achieving an electrical size of λ/3.69 and λ/8.26, respectively. The paper aims to discuss these issues.

The operation of such a radiative component has been predicted by using a simple theoretical formulation based on the cavity model. The experimental characterization of the antenna has been performed by using a HP8510C vector network analyzer, standard horn antennas, automated rotary stages, coaxial cables with 50 Ω characteristic impedance and absorbers. Before the characterization measurements we performed a full two-port calibration.

Electrically small circular patch antennas loaded with single layer metamaterials experimentally demonstrated to acceptable figures of merit for applications. The proposed miniaturization technique is potentially promising for antenna applications and the results presented in the paper constitute a relevant proof for the usefulness of the metamaterial concepts in antenna miniaturization problems.

Rigorous experimental characterization of several meta material loaded antennas and proof of principle results were provided.

Antenna miniaturization, multiband operation and wider operational bandwidth are vital to achieve optimal design for modern wireless communication devices. Using fractal geometries is recognized as one of the most promising solutions to attain these characteristics. The purpose of this paper is to present a unique structure of patch antenna using hybrid fractal technique to enhance the performance characteristics for various wireless applications and to achieve better miniaturization.

In this paper, the authors propose a novel hybrid fractal antenna by combining Koch and Minkowski (K-M) fractal geometries. A microstrip patch antenna (MPA) operating at 1.8 GHz is incorporated with a novel K-M hybrid fractal geometry. The proposed fractal antenna is designed and simulated in CST Microwave studio and compared with existing Koch fractal geometry. The prototype for the third iteration of the K-M fractal antenna is then fabricated on FR-4 substrate and tested through vector network analyzer for operating band/voltage standing wave ratio.

The third iteration of the proposed K-M fractal geometry results in achieving a 20% size reduction as compared to an ordinary MPA for the same resonant frequency with impedance bandwidth of 16.25 MHz and a directional gain of 6.48 dB, respectively. The operating frequency of MPA also lowers down to 1.44 GHz.

Further testing for the radiation patterns in an anechoic chamber shows good agreement to those of simulated results.

The purpose of this paper is to investigate strategies and algorithms for expedited design optimization and explicit size reduction of compact ultra-wideband (UWB) antennas.

Formulation of the compact antenna design problem aiming at explicit size reduction while maintaining acceptable electrical performance is presented. Algorithmic frameworks are described suitable for handling various design situations and involving simulation models without and with response gradients available. Numerical and experimental case studies are provided demonstrating feasibility of solving real-world miniaturized antenna design tasks.

It is possible, through appropriate combination of the global and local optimization methods, surrogate modeling techniques and response correction methods, to find optimum dimensions of antenna structures that minimize antenna size while maintaining acceptable electrical performance. Design optimization can be performed at practically feasible computational costs.

The study summarizes recent advances in miniaturization-oriented design optimization of UWB antennas. The presented techniques reach far beyond the commonly used design approaches based on parameter sweeps and similar hands-on methods, particularly in terms of automation, reliability, and reduction of the computational costs of the design processes.

The proposed design problem formulation and algorithmic frameworks proved useful for rapid design of compact UWB antenna structures, which is extremely challenging when using conventional methods. To the knowledge, this is the first attempt to efficient solving of this type of design problems, especially in the context of explicit antenna size reduction.

The paper aims to focus on implantable antenna sensors used for biomedical applications. Communication in implantable medical devices (IMDs) is beneficial for continuous monitoring of health. The ability to communicate with exterior equipment is an important aspect of IMD. Thus, the design of an implantable antenna for integration into IMD is important.

In this review, recent developments in IMDs, three types of antenna sensors, which are recommended by researchers for biomedical implants are considered. In this review, design requirements, different types of their antenna, parameters and characteristics in medical implants communication system (MICS) and industrial, scientific and medical (ISM) bands are summarized here. Also, overall current progress in development of implantable antenna sensor, its challenges and the importance of human body characteristics are described.

This article give information about the requirements of implantable antenna sensor designs, types of antennas useful to design implantable devices and their characteristics in MICS and ISM bands. Recent advancement in implantable devices has led to an improvement in human health.

The paper provides useful information on implantable antennas design for biomedical application. The designing of such antennas needs to meet requirements such as compact size, patients’ safety, communication ability and biocompatibility.

The fifth-generation technology 5G, the planned successor to 4G, is a new global standard for mobile networks that brings virtual to reality. 5G wireless technology enables the delivery of high speed, low latency, reliability, 100% coverage and availability to connect number of users as in massive IoT applications.

With expeditious development in wireless communication, the need for enhanced characteristic antenna design such as the size of the antenna, high data rate, demand in traffic, bandwidth, gain and efficiency increases. Various antenna designs are to be explored to meet the needs and achieve trade-offs between antenna size vs cost, high gain and efficiency vs less loss, high B.W and data rate with the selection of appropriate substrate materials and various gain & isolation enhancement techniques.

This paper thus gives scope for miniaturized MIMO antenna design for mobile applications at mm-wave frequency range.

This paper thus gives scope for miniaturized MIMO antenna design for mobile applications at mm-wave frequency range.

A vertically stacked, three layer hybrid Hilbert fractal geometry and serpentine radiator-based patch antenna is proposed and characterized for medical implant applications at the Industrial, Scientific and Medical band (2.4-2.48 GHz). Antenna parameters are optimised to achieve miniaturized, biocompatible and stable transmission characteristics. The paper aims to discuss these issues.

Human tissue effects on the antenna electrical characteristics were simulated with a three-layer (skin, fat and muscle) human tissue model with the dimensions of 180×70×60 mm3 (width×height×thickness mm3). Different stacked substrates are utilized for the satisfactory characteristics. Two identical radiating patches are printed on Roger 3,010 (ε _r=10.2) and Alumina (ε _r=9.4) substrate materials, respectively. In addition, various superstrate materials are considered and simulated to prevent short circuit the antenna while having a direct contact with the metallization, and achieve biocompatibility. Finally, superstrate material of Zirconia (ε _r=29) is used to achieve biocompatibility and long-life. A finite element method is used to simulate the proposed hybrid model with commercially available Ansoft HFSS software.

The antenna is miniaturized, having dimensions of 10×8.4×2 mm3 (width×height×thickness mm3). The resonance frequency of the antenna is 2.4 GHz with a bandwidth of 100 MHz at return loss (S11) of better than −10 dB characteristics. Overall, the proposed antenna have 50 Ω impedance matching, −21 dB far field antenna gain, single-plane omni-directional radiation pattern properties and incident power of 5.3 mW to adhere Specific Absorption Rate regulation limit.

Vertically stacked three layer hybrid design have miniaturized characteristics, wide bandwidth, biocompatible, and stable characteristics in three layer human tissue model make this antenna suitable for implant biomedical monitor systems. The advanced simulation analysis of the proposed design constitutes the main contribution of the paper.

The skin and skeleton of aircraft are connected by adhesives or rivets to bear and transfer aerodynamic load. It is easy for crack and fracture damage to occur under the action of cyclic load, thus reducing aircraft bearing capacity/integrity and causing serious security risks. Therefore, it is particularly important that passive wireless radio frequency identification (RFID) sensors be used for the health monitoring of aircraft skin in its whole life cycle. This paper aims to investigate the influence of miniaturization on the coupling effect between RFID tag sensors.

Two groups of crack sensing systems based on RFID tags were designed. Gain and mutual impedance of sensor tags were analyzed via mode analysis. The reliability of crack detection of both sensing systems was compared using a preset experimental scheme.

Miniaturized antennas can reduce edge influence and the coupling effect. Gain and mutual impedance decrease with the increase in distance between dual tags. Backscatter power shows a decreasing trend and threshold power to activate tags in reader antenna increases. Results show that the miniaturization of size is more suitable for the application of multiple sensors.

By comparing two groups of sensing systems, the consistency of crack detection sensitivity is better when small tags are placed in parallel, which provides a theoretical basis for the application of small, passive and densely distributed crack sensors in the future.

This paper aims to propose a single element, dual feed, polarisation diversity antenna. The proposed antenna operates from 2.9 to 10.6 GHz for covering the entire ultra-wideband (UWB) frequency range. The antenna is designed for usage in massive multiple input multiple output (MIMO) and closed packaging applications.

The size of the antenna is 24 × 24 × 1.6 mm³. The radiating element of the antenna is derived from the Sierpinski–Knopp (SK) fractal geometry for miniaturization of the antenna size. The antenna has a single reflecting stub placed between the two orthogonal feeds, to improve isolation.

The proposed antenna system exhibits S₁₁ < −10 dB, S₂₁ < −15 dB and stable radiation characteristics in the entire operating region. It also offers an envelope correlation coefficient < 0.01, a diversity gain > 9.9 dB and a capacity loss < 0.4 bps/Hz. The simulated and measured outputs were compared and results were found to be in similarity.

The proposed UWB-MIMO antenna has significant size reduction through usage of SK fractal geometry for radiating element. The antenna uses a single radiating element with dual feed. The stub is between the antenna elements which provide a compact and miniaturized MIMO solution for high density packaging applications. The UWB-MIMO antenna provides an isolation better than −20 dB in the entire UWB operating band.

The purpose of this paper is to investigate the strategies and algorithms for expedited design optimization of microwave and antenna structures in multi-objective setup.

Formulation of the multi-objective design problem-oriented toward execution of the population-based metaheuristic algorithm within the segmented search space is investigated. Described algorithmic framework exploits variable fidelity modeling, physics- and approximation-based representation of the structure and model correction techniques. The considered approach is suitable for handling various problems pertinent to the design of microwave and antenna structures. Numerical case studies are provided demonstrating the feasibility of the segmentation-based framework for the design of real-world structures in setups with two and three objectives.

Formulation of appropriate design problem enables identification of the search space region containing Pareto front, which can be further divided into a set of compartments characterized by small combined volume. Approximation model of each segment can be constructed using a small number of training samples and then optimized, at a negligible computational cost, using population-based metaheuristics. Introduction of segmentation mechanism to multi-objective design framework is important to facilitate low-cost optimization of many-parameter structures represented by numerically expensive computational models. Further reduction of the design cost can be achieved by enforcing equal-volumes of the search space segments.

The study summarizes recent advances in low-cost multi-objective design of microwave and antenna structures. The investigated techniques exceed capabilities of conventional design approaches involving direct evaluation of physics-based models for determination of trade-offs between the design objectives, particularly in terms of reliability and reduction of the computational cost. Studies on the scalability of segmentation mechanism indicate that computational benefits of the approach decrease with the number of search space segments.

The proposed design framework proved useful for the rapid multi-objective design of microwave and antenna structures characterized by complex and multi-parameter topologies, which is extremely challenging when using conventional methods driven by population-based metaheuristics algorithms. To the authors knowledge, this is the first work that summarizes segmentation-based approaches to multi-objective optimization of microwave and antenna components.

This paper aims to present a low-cost, edge-fed, windmill-shaped, notch-band eliminator, circular monopole antenna which is practically loaded with a complementary split ring resonator (CSRR) in the middle of the radiating conductor and also uses a partial ground to obtain wide-band performance.

To compensate for the reduced value of gain and reflection coefficient because of the full (complete) ground plane at the bottom of the substrate, the antenna is further loaded with a partial ground and a CSRR. The reduction in the length of ground near the feed line improves the impedance bandwidth, and introduced CSRR results in improved gain with an additional resonance spike. This results in a peak gain 3.895dBi at the designed frequency 2.45 GHz. The extending of three arms in the circular patch not only led to an increase of peak gain by 4.044dBi but also eliminated the notch band and improved the fractional bandwidth 1.65–2.92 GHz.

The work reports a –10dB bandwidth from 1.63 GHz to 2.91 GHz, which covers traditional coverage applications and new specific uses applications such as narrow LTE bands for future internet of things (NB-IoT) machine-to-machine communications 1.8/1.9/2.1/2.3/2.5/2.6 GHz, industry, automation and business-critical cases (2.1/2.3/2.6 GHz), industrial, society and medical applications such as Wi-MAX (3.5 GHz), Wi-Fi3 (2.45 GHz), GSM (1.9 GHz), public safety band, Bluetooth (2.40–2.485 GHz), Zigbee (2.40–2.48Ghz), industrial scientific medical (ISM) band (2.4–2.5 GHz), WCDMA (1.9, 2.1 GHz), 3 G (2.1 GHz), 4 G LTE (2.1–2.5 GHz) and other personal communication services applications. The estimated RLC electrical equivalent circuit is also presented at the end.

Because of full coverage of Bluetooth, Zigbee, WiFi3 and ISM band, the proposed fabricated antenna is suitable for low power, low data rate and wireless/wired short-range IoT-enabled medical applications.

The antenna is fabricated on a piece (66.4 mm × 66.4 mm × 1.6 mm) of low-cost low profile FR-4 epoxy substrate (0.54 λ_g × 0.54 λ_g) with a dielectric constant of 4.4, a loss tangent of 0.02 and a thickness of 1.6 mm. The antenna reflection coefficient, impedance and VSWR are tested on the Keysight technology (N9917A) vector network analyzer, and the radiation pattern is measured in an anechoic chamber.