Search results

The purpose of this paper is to describe a novel design workflow for the digital fabrication of custom-made orthoses (CMIO). It is intended to provide an easier process for clinical practitioners and orthotic technicians alike. It further functions to reduce the dependency of the operators’ abilities and skills.

The technical assessment covers low-cost three-dimensional (3D) scanning, free computer-aided design (CAD) software, and desktop 3D printing and acetone vapour finishing. To analyse its viability, a cost comparison was carried out between the proposed workflow and the traditional CMIO manufacture method.

The results show that the proposed workflow is a technically feasible and cost-effective solution to improve upon the traditional process of design and manufacture of custom-made static trapeziometacarpal (TMC) orthoses. Further studies are needed for ensuring a clinically feasible approach and for estimating the efficacy of the method for the recovery process in patients.

The feasibility of the process increases the impact of the study, as the great accessibility to this type of 3D printers makes the digital fabrication method easier to be adopted by operators.

Although some research has been conducted on digital fabrication of CMIO, few studies have investigated the use of desktop 3D printing in any systematic way. This study provides a first step in the exploration of a new design workflow using low-cost digital fabrication tools combined with non-manual finishing.

This work presents a review of the state of the art of the present century on academic and scientific production in Latin America related to the concept of Social Innovation. The analysis is based on articles published in indexed journals, which makes it possible to understand the existing asymmetry between the conceptual and theoretical veins, of the case studies, as well as of good social innovation practices that have been published in recent years. These debates have in some cases transcended public policies, as well as business and social realities where social innovation is a mechanism and strategy for personal, social, and territorial development. Finally, a Latin American community of researchers and academics around social innovation must be consolidated, who choose to continue building theoretical-empirical bodies following the Latin American reality.

The purpose of this paper is to explore the relationship between changes in the business cycle (as indicated by the incidence and duration of unemployment) and the incidence of suicide.

A theoretical utility model with savings and consumption is used, while time series micro‐level suicide data and probit analysis is used to empirically test the implications of the model.

With declining economic activity and the corresponding increase in unemployment the propensity to commit suicide rises among men for numerable reasons. The authors hypothesize that there is a negative impact with respect to the decline in economic activity and as the intensity increases with respect to the declining business cycle, female's suicides will tend to accelerate.

One of the primary limitations of this study is the amount of control variables to which the authors had access. There are many factors that would influence an individual when determining whether or not to take their own life. Religious convictions, the presence of children, income, educational attainment, occupational attainment, pre‐unemployment income, and how long one had been married or divorced (or unmarried) are all variables that could influence the likelihood of a suicide. The center of disease control (CDC) public use files, however, do not include these variables; thus, the authors were unable to control for their impact.

The authors believe that these findings merit greater public awareness and increases in various forms of public and private support for recently unemployed individuals, being particularly attentive to the effect of higher than normal rates and durations of unemployment and the differences based on gender. These findings also establish another sound rationale for public policies to encourage the increase of personal savings during times of employment to make weathering periods of unemployment easier.

In times of increased incidence and duration of unemployment, the tendency of legislators and other public policy makers presumably would be to establish programs targeted to address the population with the highest rates of unemployment‐related suicide – White males. It can be argued, however, that since the increased incidence and duration of unemployment have a greater effect on increasing the rate of suicide in women, public policies and programs targeting the specific needs and issues of those unemployed women with an increased risk of suicide would be more cost‐effective, preventing or reducing those incremental suicides and mitigating their negative economic, social, and familial impacts.

Previous studies used descriptive statistics, contingency tables, and the traditional statistical regression techniques in their empirical analysis; this study deviates from the norm by the use of probit analysis. Using the probit technique allowed the authors to focus their analysis on the probabilities of suicide with regard not just to the business cycle itself but also to the intensity of the business cycle.

Liquid crystal display (LCD)-based stereolithography (SLA) technique has been used in drug delivery and fabrication of microfluidic devices and piezoelectric materials. It is an additive manufacturing technique where an LCD source has been used as a mask to project the image onto the tank filled with photo curable resin. This resin, when interacted with light, becomes solid. However, critical information regarding the energy absorption during the compression analysis of different components three-dimensional (3D) printed by SLA process is still limited. Therefore, this study aims to investigate the effect of different process parameters on the compressive properties.

In the present study, the influence of layer thickness, infill density and build orientation on the compression properties is investigated. Four infill densities, that is, 20%, 40%, 60% and 80%; five-layer thicknesses, that is, 50 µm, 75 µm, 100 µm, 150 µm and 200 µm; and two different orientations, that is, YXZ and ZXY, have been selected for this study.

It is observed that the samples printed with acrylonitrile butadiene styrene (ABS) absorbed higher energy than the flexible polyurethane (FPU). Higher infill density and sample oriented on ZXY absorbed higher energy than sample printed on YXZ orientation, in both the ABS and FPU materials. Parts printed with 80% infill density and 200 µm layer thickness resulted into maximum energy for both the materials.

In this study, two different types of materials are used for the compression analysis using LCD-SLA-based 3D printer. Specific energy absorbed by the samples during compression testing is measured to compare the influence of parameters. The investigation of infill parameters particularly the infill density is very limited for the SLA-based 3D printing process. Also, the results of this study provide a database to select the print parameters to obtain the required properties. The results also compare the specific energy for hard and flexible material for the same combination of the process parameters.