Search results

The purpose of this study was to improve the overall equipment effectiveness (OEE) of the production process of the shredder operation of ABC company, an industrial waste management company which supplies pre-processed industrial waste as alternative fuel to a cement plant.

This case study investigated all possible availability and performance losses that caused the shredder system’s OEE and various problem-solving techniques, such as root cause analysis and Pareto analysis, were used to find the root cause of the reduced OEE.

After analysing this case study, three significant loss factors were identified from all the availability and performance losses, which caused the shredder system’s OEE losses. Practical solutions were found for the effect of those loss factors to improve the machine’s OEE and productivity.

This case study has been concentrated on only analysing of losses and improvement of OEE in the production process and not about cost analysis between loss and improvements.

This paper shows how to improve the OEE of a production process through various problem-solving techniques by identifying its losses and how to achieve the best solutions for those losses in a practical manner.

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on properties of low calcium fly ash (FA)-based geopolymer concrete (GPC) cured at oven temperature. Further, this paper aims to study the effect of partial replacement of FA by ground granulated blast slag (GGBS) in GPC made with both NCA and RCA cured under ambient temperature curing.

M25 grade of ordinary Portland cement (OPC) concrete was designed according to IS: 10262-2019 with 100% NCA as control concrete. Since no standard guidelines are available in the literature for GPC, the same mix proportion was adopted for the GPC by replacing the OPC with 100% FA and W/C ratio by alkalinity/binder ratio. All FA-based GPC mixes were prepared with 12 M of sodium hydroxide (NaOH) and an alkalinity ratio, i.e. sodium hydroxide to sodium silicate (NaOH:Na₂SiO₃) of 1:1.5, subjected to 90^°C temperature for 48 h of curing. The NCA were replaced with 50% and 100% RCA in both OPC and GPC mixes. Further, FA was partially replaced with 15% GGBS in GPC made with the above percentages of NCA and RCA, and they were given ambient temperature curing with the same molarity of NaOH and alkalinity ratio.

The workability, compressive strength, split tensile strength, flexural strength, water absorption, density, volume of voids and rebound hammer value of all the mixes were studied. Further, the relationship between compressive strength and other mechanical properties of GPC mixes were established and compared with the well-established relationships available for conventional concrete. From the experimental results, it is found that the compressive strength of GPC under ambient curing condition at 28 days with 100% NCA, 50% RCA and 100% RCA were, respectively, 14.8%, 12.85% and 17.76% higher than those of OPC concrete. Further, it is found that 85% FA and 15% GGBS-based GPC with RCA under ambient curing shown superior performance than OPC concrete and FA-based GPC cured under oven curing.

The scope of the present paper is limited to replace the FA by 15% GGBS. Further, only 50% and 100% RCA are used in place of natural aggregate. However, in future study, the replacement of FA by different amounts of GGBS (20%, 25%, 30% and 35%) may be tried to decide the optimum utilisation of GGBS so that the applications of GPC can be widely used in cast in situ applications, i.e. under ambient curing condition. Further, in the present study, the natural aggregate is replaced with only 50% and 100% RCA in GPC. However, further investigations may be carried out by considering different percentages between 50 and 100 with the optimum compositions of FA and GGBS to enhance the use of RCA in GPC applications. The present study is further limited to only the mechanical properties and a few other properties of GPC. For wider use of GPC under ambient curing conditions, the structural performance of GPC needs to be understood. Therefore, the structural performance of GPC subjected to different loadings under ambient curing with RCA to be investigated in future study.

The replacement percentage of natural aggregate by RCA may be further enhanced to 50% in GPC under ambient curing condition without compromising on the mechanical properties of concrete. This may be a good alternative for OPC and natural aggregate to reduce pollution and leads sustainability in the construction.

Though alternative building technologies (ABTs) have been encouraged to address accessible and affordable issues in low-cost housing (LCH) provision, their adoption is still overwhelmed with encumbrances. The encumbrances that hinder ABT adoption require an in-depth study, especially in developing countries like Nigeria. However, studies regarding ABT and its role in improving Nigeria's LCH to achieve Sustainable Development Goal (SDG) 11 are scarce. This research investigates encumbrances to ABT adoption in Nigeria's LCH provision and suggests feasible measures to prevent or reduce the encumbrances, thereby improving achieving SDG 11 (sustainable cities and communities).

This research utilised qualitative research and adopted a face-to-face interview as the primary data collection. The interviewees comprised ABT practitioners and end users in Nigeria who were chosen by a convenient sampling technique. The study's data were analysed manually through a thematic approach.

This study shows that stakeholders should embrace ABT in LCH provision to improve achieving SDG 11 in Nigeria. Also, it clustered the perceived 20 encumbrances to ABT adoption in LCH provision into government/policymaker, housing developers/building contractors, ABT users and ABT manufacturers-related issues in Nigeria's context. This study suggested mechanisms to mitigate encumbrances to ABT adoption in LCH provision, thereby improving achieving SDG 11.

This research adds to the limited literature by analysing ABT adoption encumbrances in Nigeria's LCH provision, which could assist policy formulation for the uptake of ABT in LCH provision and improve achieving Goal 11.

The purpose of the article is to identify relevant criteria for decision support in the implementation of waste-to-energy (WtE)-based systems.

The methodology is a simple case study with a qualitative approach. Five experts involved in the project of a thermoelectric power plant qualitatively evaluated, on a Likert scale, a decision model with 15 indicators derived from recent studies. The research object was the first stage of a project to implement a thermoelectric plant employing municipal solid waste (MSW) in southern Brazil.

The study identified 15 criteria supporting the decision-making process regarding WtE implementation for MSW in a mid-sized city in southern Brazil. The study identified that compliance with MSW legislation, compliance with energy legislation, initial investment and public health impact are the most influential criteria. The study offered two models for decision processes: a simplified one and a complete one, with ten and fifteen indicators, respectively.

The study concerns mid-sized municipalities in southern Brazil.

Municipal public managers have now a methodology based on qualitative evaluation that admits multiple perspectives, such as technical, economic, environmental and social, to support decision-making processes on WtE technologies for MSW.

MSW management initiatives can yield jobs and revenues for vulnerable populations and provide a correct destination for MSW, mainly in developing countries.

The main originality is that now municipal public decision-makers have a structured model based on four constructs (technical, economic, environmental and social) deployed in 15 indicators to support decision-making processes involving WtE and MSW management.

This study investigates Rokkan's research programme in the light of the differences between case- and variables-based methodologies. Three phases of the research process are distinguished. Studying the way Rokkan actually proceeded in the research within his Europe project, we find that he follows the protocols of case-methodologies such as grounded theory. In the second phase of the research process, however, he constructs variables-based models as tools for his macro-historical comparisons. To get to variables from the sensitizing concepts coded in the first phase, Rokkan defines his variables as close to cases as possible: variables as nominal level typologies, types as variable values. He thus faces two interrelated dilemmas. First, a philosophy of science dissonance: he legitimates his research only with reference to a variable-methodology, while his research is thoroughly case based. Second, a paradox of double coding: using variable-based models in the second phase, the status of the knowledge available in the first phase memos is degraded. Rokkan cannot decide between the two main solutions to these dilemmas: The first solution is to discard his heterogeneous data, instead working only with homogeneous data that opens up to more consistently variables-oriented research. The second solution is to replace the notion of variables/variable values with typology/types, thereby returning to cases, pursuing comparative case reconstructions in the third phase of research. The study concludes in favour of the second solution.

This paper aims to investigate the influence of sustainable enterprise resource planning (S-ERPs) systems implementation on sustainability performance.

A 1 × 2 experiment was conducted, involving a sample of 72 professional accountants enrolled in MPA, MBA and DBA programs at two prominent Egyptian universities. Simple linear regression was used to analyze the data.

The results reveal positive relationships between the implementation of S-ERPs and economic, environmental and social sustainability performance.

Considering the research methodology used, which relies on a laboratory experiment design; nevertheless, empirical data derived from a quasi-experiment conducted in a real-world context would offer valuable insights into the existing literature.

For manufacturing sector managers, the results offer value as organizations can benefit from S-ERP adoption in the internal and external integration of sustainability functions. The findings also provide decision-makers in the manufacturing context, particularly in emerging countries, with tangible reasons to consider S-ERP adoption for holistic sustainability benefits including waste management, resource consumption reduction and management of sustainable supply chain complexities. Further, the findings provide valuable insights for ERP vendors on how they can develop their ERP packages to align with software sustainability criteria.

This study is among the few that experimentally investigates the influence of S-ERPs implementation on sustainability performance within the manufacturing sector, especially in an emerging context such as Egypt. This unique contribution provides valuable insights into the complex connection between technology adoption and sustainability outcomes.

Nearly 75% of EU buildings are not energy-efficient enough to meet the international climate goals, which triggers the need to develop sustainable construction techniques with high degree of resilience against climate change. In this context, a promising construction technique is represented by ventilated façades (VFs). This paper aims to propose three different VFs and the authors define a novel machine learning-based approach to evaluate and predict their energy performance under different boundary conditions, without the need for expensive on-site experimentations

The approach is based on the use of machine learning algorithms for the evaluation of different VF configurations and allows for the prediction of the temperatures in the cavities and of the heat fluxes. The authors trained different regression algorithms and obtained low prediction errors, in particular for temperatures. The authors used such models to simulate the thermo-physical behavior of the VFs and determined the most energy-efficient design variant.

The authors found that regression trees allow for an accurate simulation of the thermal behavior of VFs. The authors also studied feature weights to determine the most relevant thermo-physical parameters. Finally, the authors determined the best design variant and the optimal air velocity in the cavity.

This study is unique in four main aspects: the thermo-dynamic analysis is performed under different thermal masses, positions of the cavity and geometries; the VFs are mated with a controlled ventilation system, used to parameterize the thermodynamic behavior under stepwise variations of the air inflow; temperatures and heat fluxes are predicted through machine learning models; the best configuration is determined through simulations, with no onerous in situ experimentations needed.

While most West European nations were formed around pre-existing entities that could be called “countries” before the modern age, this was not the case in the Middle East. Some entities, like Egypt, did have a clear political and cultural identity before colonialism, others, like Algeria, did not. This chapter discusses the four states of the Maghreb: Morocco, Algeria, Tunisia and Libya, through the perspective of “country creation” going into and coming out of colonial rule. We can see here two “models” of fairly similar types of historical development, one showing a gradual process through a protectorate period to relatively stable modern nations, another through violent conquest and direct colonization ending in violent liberation and military and wealthy but fragile states. The article asks whether these models for the history of country creation and the presence or absence of pre-colonial identities can help explain the modern history and nature of these states in the Arab Spring and the years thereafter. Then, a more tentative attempt is made to apply these models to two countries of the Arab east, Syria and Iraq. While local variations ensure that no model can be transferred directly, it can show the importance of studying the historical factors that go into the transition from geographical region to a country with people that can form the basis of a nation.

Through the case of Blanca Sinchi, the following analysis presents valuation criteria that have resulted in the invisibility of social actors and cultural patrimony (cultural heritage) elements, and some contradictions in their acknowledgment process. In addition, the paper explains how architecture, among other historic assets, has made women and their contributions invisible.

Bibliographic analysis and semi-structured interviews were carried out to theorize about the thermodynamic system of lime to propose a matri-lineal system category and expand the understanding of the participation of women in the receipt, management and transmission of what is called patrimony.

In heritage places, such as Cuenca (Ecuador), cultural richness extends from the Historic Center to the rest of the territory and its actors. However, there are intrinsic elements, such as unknown, but fundamental, oral or family traditions associated with the role of women. The case of Blanca Sinchi and lime is evidence of this, as it shows the typical scenario affected by gender and by disparate power dynamics that do not consider desirable attributes (authenticity, integrity, identity, bequest, option, existence, among others) in the conservation of architectural patrimony. A deep redefinition process, or even a change in the valuation system, is needed. Also, the history behind built heritage items must be explored to find the contributions made by women.

Proposing a matri-lineal system category to expand the understanding of the participation of women in the receipt, management and transmission of what is called patrimony, allows redefining and rewriting local and global history, acknowledging the role of women. In this way, the proposal questions not only the hegemony of the term “cultural patrimony” pigeonholed in paternal legacy but also the term “cultural heritage” as a synonym and framework that, while expanding material values, it does not effectively include, at least for Ibero-Romance language territories, the broad set of tangible and intangible values, as well as the know-how and skills of artisans.

Supply chain (SC) management is more challenging than ever. Significantly, the pandemic has provoked global and economic destruction that appeared in the manufacturing industry as a “black swan.” Therefore, the purpose of this study was to examine the role of information processing and digital supply chain in supply chain resilience through supply chain risk management.

This study examines SC risk management and resilience from an information processing theory perspective. The authors used data collected from 251 SC professionals in the manufacturing industry, and the authors used a quantitative method to analyze the data. The data was analyzed using partial least squares-structural equation modeling. To confirm the higher-order measurement model, the authors used SmartPLS version 4 software.

This study found that information processing capability (disruptive orientation and visibility in high-order) and digital SC significantly and positively affect SC risk management and resilience. Similarly, SC risk management positively mediates the relationship between information processing capability and digital SC. However, information processing capability was found to have a more substantial effect on SC risk management than the digital SC.

This study has both academic and practical contributions. It contributed to existing information processing theory, and manufacturing firms can improve their performance by proactively responding to SC disruptions by recognizing the pivotal role of study variables in risk management for a resilient SC.

The conceptual model of this study is based on information processing theory, which asserts that synchronizing information processing capabilities and digital SCs allows a firm to deal with unplanned events. SC disruption orientation and visibility are considered risk controllers as they allow the firms to be more proactive. An integrated model of conceptualizing the disruption orientation, visibility (higher-order) and digital SC with information processing theory makes this research novel.