Search results

1 – 2 of 2
To view the access options for this content please click here
Article
Publication date: 18 October 2017

Srdjan Jovic, Dragan Lazarevic and Aleksa Vulovic

The paper aims to analyze chip formation during machining process since it can be a very important indicator for the quality of the machining process, as some chip forms…

Abstract

Purpose

The paper aims to analyze chip formation during machining process since it can be a very important indicator for the quality of the machining process, as some chip forms can be undesirable.

Design/methodology/approach

It is essential to determine the sensitivity of the chip formation on the basis of different machining parameters. The main goal of the study was to analyze the sensitivity of the chip formation during the machining process by using adaptive neuro-fuzzy inference system (ANFIS).

Findings

According to the results, the chip formation is the most sensitive to feed rate.

Originality/value

Different cutting tests were performed to monitor the chip formation on the basis of the cutting forces and the cutting displacement. ANFIS was used to estimate the sensitivity of the chip formation during the cutting process on the basis of different parameters.

Details

Sensor Review, vol. 37 no. 4
Type: Research Article
ISSN: 0260-2288

Keywords

To view the access options for this content please click here
Article
Publication date: 22 November 2017

Obrad Anicic, Srdjan Jovic, Srdan Tasic, Aleksa Vulovic and Milivoje Jovanovic

This study aims to detect the temperature distribution in the cutting zone during the machining process. Furthermore, temperature influence in the cutting zone on the…

Abstract

Purpose

This study aims to detect the temperature distribution in the cutting zone during the machining process. Furthermore, temperature influence in the cutting zone on the forms of chip shapes during the turning of Steel 30CrNiMo8 was evaluated. It is very important to use optimal machining parameters to get the best production results or for high control of the machining process.

Design/methodology/approach

Temperature distribution in the cutting zone during the machining process could affect the forms of chip shapes. Forms of chip shapes could be considered as the most important indicator for the quality of the machining process.

Findings

Therefore, in this study, the forms of chip shapes based on the temperature distribution in the cutting zone were examined.

Originality/value

It was found that the snarled chip type and the loose chip type have the highest temperature variation during the machining process.

Details

Sensor Review, vol. 38 no. 1
Type: Research Article
ISSN: 0260-2288

Keywords

1 – 2 of 2