Search results

The Heating, Ventilation and Air Conditioning (HVAC) system is a significant energy consumer in built environments, and the building energy consumption could be minimised by optimising HVAC controls. Hence, this paper aims to investigate the applicability of Variable Refrigerant Flow (VRF) air conditioning systems for optimising the indoor comfort of buildings in Sri Lanka.

To address the research aim, the quantitative approach following the survey research strategy was deployed. Data collected through questionnaires were analysed using descriptive statistical tools, including Mean Rating (MR), Relative Important Index (RII) and Standard Deviation (SD).

The findings revealed that VRF systems are popularly used in Sri Lankan apartment buildings. Furthermore, energy efficiency and comfort were recognised as the most significant top-ranked benefits, while ventilation issues and initial cost were recognised as significant challenges. Moreover, the allocation of trained technicians and provision of proper ventilation through a Dedicated Outdoor Air System (DOAS) were highlighted as applicable mitigation strategies for the identified challenges in VRFs.

The study recommends VRF systems as a suitable technology to ensure energy efficiency, reduce GHG emissions and achieve climate performance within the built environment. The opportunities for adopting VRF systems for developing countries could be explored based on the research findings. The identified challenges would assist the design engineers and facilities professionals to devise suitable strategies to mitigate issues of VRF systems in developing countries.

This research provides empirical proof of the energy efficiency and comfort aspects of VRFs. The study has explored and recommended VRF technology as a beneficial application to overcome the persistent energy crisis in developing countries.

Commercial buildings, which include office buildings, are one of the three major energy-consuming sectors, alongside industrial and transportation sectors. The vast increase in the number of buildings is a positive sign of the rapid development of Malaysia. However, most Malaysian government office buildings tend to consume energy inefficiently due to lack of energy optimization. Most of the previous studies focused on the performance of green buildings in fulfilling the green development guidelines. As such, it is essential to study the energy performance of existing government office buildings that were constructed before most energy-efficient standards were implemented to mitigate energy wastage due to the lack of energy optimization. This study aims to analyse the energy performance of existing non-green Malaysian government office buildings and the factors that influence building energy consumption, as well as to evaluate the efficacy of the existing energy conservation measures.

This study was conducted by a literature review and case study. The chosen buildings are six government office building blocks located in Kuala Lumpur, the capital city of Malaysia. In this study, a literature review has been conducted on the common factors affecting energy consumption in office buildings. The energy consumption data of the buildings were collected to calculate the building energy intensity (BEI). The BEI was compared to the MS1525:2019 and GBI benchmarks to evaluate energy performance. SketchUp software was utilized to illustrate the solar radiation and sun path diagram of the case study buildings. Finally, recommendations were derived for retrofit strategies based on non-design factors and passive design factors.

In typical government office buildings, the air-conditioning system consumed the most energy at 65.5%, followed by lighting system at 22.6%, and the remaining 11.9% was contributed by office appliances. The energy performance of the case study buildings is considered as satisfactory as the BEI did not exceed the MS1525:2019 benchmark of 200 kWh/m2/year. The E Block recorded the highest BEI of 183.12 kWh/m2/year in 2020 due to its north-east orientation which is exposed to the most solar radiation. Besides, E Block consists of rooms that can accommodate large number of occupants. As such, non-design factors which include higher occupancy rate and higher cooling demand due to high outdoor temperature leads to higher energy consumption. By considering passive design features such as building orientation and building envelope thermal properties, energy consumption can be reduced significantly.

This study provided a comprehensive insight into the energy performance of Malaysian government office buildings, which were constructed before the energy-efficient standards being introduced. By calculating the BEI of six government office buildings, it is found that the energy performance of the case study buildings fulfils the MS1525 benchmark, and that all their BEIs are below 200 kWh/m2/year. Malaysia's hot and humid climate significantly affects a building's cooling load, and it is found the air-conditioning system is the major energy consumer of Malaysian government office buildings. This study discusses the efficacy of the energy-saving measures implemented in the case study buildings to optimize energy consumption. Recommendations were derived based on the non-design factors and passive design factors that affected the energy consumption of the case study building. It is envisioned that this study can provide practical strategies for retrofit interventions to reduce energy consumption in Malaysian office buildings as well as for office buildings that are in a similar climate.

The building sector contributes one-third of the energy-related carbon dioxide globally. Therefore, framing appropriate energy-related policies for the next decades becomes essential in this scenario to realize the global net-zero goals. The purpose of the proposed study is to evaluate the impact of the widespread adoption of such guidelines in a building community in the context of mixed-mode buildings.

This study decentralizes the theme of improving the energy efficiency of the national building stock in parcels by proposing a community-based hybrid bottom-up modelling approach using urban building energy modelling (UBEM) techniques to analyze the effectiveness of the community-wide implementation of energy conservation guidelines.

In this study, the UBEM is developed and validated for the 14-building residential community in Mumbai, India, adopting the framework. Employing Energy Conservation Building Code (ECBC) compliance on the UBEM shows an energy use reduction potential of up to 15%. The results also reveal that ECBC compliance is more advantageous considering the effects of climate change.

In developing countries where the availability of existing building stock information is minimal, the proposed study formulates a holistic framework for developing a detailed UBEM for the residential building stock from scratch. A unique method of assessing the actual cooling load of the developed UBEM is presented. A thorough sensitivity analysis approach to investigate the effect of cooling space fraction on the energy consumption of the building stock is presented, which would assist in choosing the appropriate retrofit strategies. The proposed study's outcomes can significantly transform the formulation and validation of appropriate energy policies.

The aim of the research presented in this paper is to provide information on the common problems of healthy homes in the context of architectural design deficiencies. Especially because determining the status of a healthy house is particularly challenging if the design is poor.

Qualitative methods, i.e. interviews, site visits and graphic elicitation diagramming were used in two different stages of data collection. They were then analysed using thematic analysis.

The findings show that the architectural elements can have positive or negative effects on the health and safe environments. The quantity of doors and the use of transparent glass have largely contributed to the thermal transmission and increased indoor temperatures. The roof aluminium sheets and absence of vents inhibited indoor heat loss. This has led to discomfort and overuse of air-conditioning units, particularly during the COVID-19 pandemic where most households stayed/worked from home. The inappropriate height of the ceiling and roof made it challenging for maintenance purpose, reducing safety levels, which could result in physical injuries.

The concept of healthy homes is not new. Studies have been conducted in Western countries and in the field of healthcare. However, there is lack of study in built environment particularly in developing countries and inadequate inter-disciplinary and empirical research to connect the healthcare field. The pervasive and recurring design deficiencies in the construction industry remain a source of unhealthy homes, which must be addressed. Future investigations are necessary to expand the conclusions that can be drawn from this paper for health equity within the society and nation.

The residential buildings sector has a high priority in the climate change adaptation process due to significant CO₂ emissions, high energy consumption and negative environmental impacts. The article investigates how, conversely speaking, the residential buildings will be affected by climate change, and how to improve existing structures and support long-term decisions.

The climate dataset was created using the scenarios determined by the Intergovernmental Panel on Climate Change (IPCC), and this was used in the study. Different building envelope and Heating, Ventilating and Air Conditioning (HVAC) systems scenarios have been developed and simulated. Then, the best scenario was determined with comparative results, and recommendations were developed.

The findings reveal that future temperature-increase will significantly impact buildings' cooling and heating energy use. As the outdoor air temperatures increase due to climate change, the heating loads of the buildings decrease, and the cooling loads increase significantly. While the heating energy consumption of the house was calculated at 170.85 kWh/m² in 2020, this value shall decrease significantly to 115.01 kWh/m² in 2080. On the other hand, the cooling energy doubled between 2020 and 2080 and reached 106.95 kWh/m² from 53.14 kWh/m² measured in 2020.

Single-family houses constitute a significant proportion of the building stock. An in-depth analysis of such a building type is necessary to cope with the devastating consequences of climate change. The study developed and scrutinised energy performance improvement scenarios to define the climate change adaptation process' impact and proper procedure. The study is trying to create a strategy to increase the climate resistance capabilities of buildings and fill the gaps in this regard.

Window shading has always been an effective technique to control the access of solar radiation; however, inappropriate selection of the shading technique, location and optical properties may lead to an increase in energy consumed for cooling and artificial lighting. Venetian blinds (VBs) are a type of adjustable shading devices that can be installed to the interior, exterior or in between glass panes of a window and that can be easily implemented in both new and existing buildings. This study aims to investigate the impact of three VB parameters: slat angle, reflectivity and location on the overall energy consumption of a residential space with a south-facing facade under the hot arid desert climate of Saudi Arabia’s capital, Riyadh. For the purpose of globalizing the findings, the same investigations were applied for two other cities of similar climates: Cairo, Egypt, and Arizona, the USA.

A test room was modelled for energy simulation, with a 20% window-to-wall ratio. A VB was assigned with alternatives of being located to the indoor, outdoor or in between double glass panes. High, medium and low reflectivity values were applied at each location at slat angle alternatives of 15°, 30°, 45°, 60°, 75° and 90°.

Results showed VB performance across slat angles, where up to 20.1% energy savings were achieved by mid-pane high reflectivity VBs in Riyadh, while the value exceeded 30% in case of being externally located. A similar performance pattern occurred in the other two cities of hot arid desert climates: Cairo and Arizona.

The study is limited to VBs at a fixed position, with no upward movement for partial or full openness conditions. The effect of blind control and operation on performance, such as the amount and duration of openness/closure of the blind and changes in slat angle across time, in addition to VB automation, shall be investigated in a future study.

The better understanding of VB energy performance achieved would enhance a more rational selection of VBs, which would benefit the construction industry as it would assist designers, real estate developer companies, as well as end-users in the decision-making process and help to realize energy-efficient solutions in residential buildings. VB production entities would also benefit by manufacturing and promoting for energy-efficient products.

In this study, a matrix of combinations of three VB parameters was developed, and the effect of these combinations on the overall energy consumption of both artificial lighting and heating, ventilation and air conditioning (HVAC) systems was evaluated and compared to identify the combinations of higher efficiency. The literature showed that these three parameters were hardly investigated in a combined form and hardly assessed by considering the overall energy consumed by both artificial lighting and HVAC.

The Gulf Cooperation Council (GCC) of countries has some of the highest electricity consumptions and carbon dioxide emissions per capita in the world. This poses a direct challenge to the GCC government’s ability to meet their CO₂ reduction targets. In this review paper the current household electricity consumption situation in the GCC is reviewed.

Three scenarios for reducing energy consumption and CO₂ emissions are proposed and evaluated using strengths, weaknesses, opportunities and threats (SWOT) as well as the political, economic, social, technical, legal and environmental (PESTLE) frameworks.

The first scenario found that using solar Photovoltaic (PV) or hybrid solar PV and wind system to power household lighting could save significant amounts of energy, based on lighting making up between 8% to 30% of electricity consumption in GCC households. The second scenario considers replacement of conventional appliances with energy-efficient ones that use around 20% less energy. The third scenario looks at influencing consumer behavior towards sustainable energy consumption.

Pilot trials of these scenarios are recommended for a number of households. Then the results and feedback could be used to launch the schemes GCC-wide.

The proposed scenarios are designed to encourage responsible electricity consumption and production within households (SDG12).

All three proposals are found viable for policymakers to implement. However, to ensure successful implementation GCC Governments are recommended to review all the opportunities and challenges associated with these schemes as laid out in this paper.

Construction organizations' investment in effective talent-development programs is a key strategy in attracting, developing and retaining staff. Such programs are especially important given the current challenges in the construction workforce, including labor shortages, an aging workforce, generational differences in the workforce, supply chain disruptions and the need to effectively train staff in the skills that are essential in a constrained labor environment. To address these challenges, this study proposes a performance measurement strategy that construction companies can use as input to design their talent development programs.

The strategy intends to assess the performance of project managers and develop criteria that define categories of their performance, including the top performers' category. This enables construction organizations to provide each project manager with individualized training that addresses areas of weakness and in turn, develops the skills that correspond with being top performers. The proposed strategy was developed and tested by surveying the immediate supervisors of 187 project managers working for general and specialty contractors in the United States. Principal component analysis was used to develop a single performance construct from seven performance criteria.

This construct was used to organize the project managers into the categories of top, above-average and below-average performers. According to the findings, top-performing project managers have well-rounded skills in the areas of leadership, communication, technical proficiency and overall job knowledge.

The outcomes of this study can help construction organizations focus their talent-development programs on the skills most associated with PMs being top performers.

This study provides construction organizations with a comprehensive performance-measuring construct to focus their talent-development programs on the skills most associated with top-performing project managers. Researchers can use this study as a foundation for further understanding how performance is related to various construction professions.

This purpose of this paper is to address the problem of reducing energy consumption in existing buildings using advanced noninvasive interventions (NVIs).

The study methodology involves systematically developing and testing 18 different NVIs in six categories (glazing types, window films, external shading devices, automated internal shades, lighting systems and nanopainting) to identify the most effective individual NVIs. The impact of each individual NVI was examined on an exemplary university educational building in a hot climate zone in Egypt using a computational energy simulation tool, and the results were used to develop 39 combination scenarios of dual, triple and quadruple combinations of NVIs.

The optimal 10 combination scenarios of NVIs were determined based on achieving the highest percentages of energy reduction. The optimal percentage of energy reduction is 47.1%, and it was obtained from a combination of nanowindow film, nanopainting, LED lighting and horizontal louver external. The study found that appropriate mixture of NVIs is the most key factor in achieving the highest percentages of energy reduction.

These results have important implications for optimizing energy savings in existing buildings. The results can guide architects, owners and policymakers in selecting the most appropriate interventions in existing buildings to achieve the optimal reduction in energy consumption.

The novelty of this research unfolds in two significant ways: first, through the exploration of the potential effects arising from the integration of advanced NVIs into existing building facades. Second, it lies in the systematic development of a series of scenarios that amalgamate these NVIs, thereby pinpointing the most efficient strategies to optimize energy savings, all without necessitating any disruptive alterations to the existing building structure. These combination scenarios encompass the incorporation of both passive and active NVIs. The potential application of these diverse scenarios to a real-life case study is presented to underscore the substantial impact that these advanced NVIs can have on the energy performance of the building.

At the beginning of the Corona Virus Disease 2019 (COVID-19) pandemic, a digitalized construction environments surfaced in the heating, ventilation and air conditioning (HVAC) systems in the form of a modern delivery system called demand controlled ventilation (DCV). Demand controlled ventilation has the potential to solve the building ventilation's biggest problem of managing indoor air quality (IAQ) for controlling COVID-19 transmission in indoor environments. However, the improper evaluation and information management of infection prevention on dense crowd activities such as measurement errors and volatile organic compound (VOC) generation failure rates, is fragmented so the aim of this research is to integrate this and explore potentials with machine learning algorithms (MLAs).

The method used is a thorough systematic literature review (SLR) approach. The results of this research consist of a detailed description of the DCV system and digitalized construction process of its IAQ elements.

The discussion revealed that DCV has a potential for being further integrated by perceiving it as a MLAs and hereby enabling the management of IAQ level from the perspective of health risk function mechanism (i.e. VOC and CO₂) for maintaining a comfortable thermal environment and save energy of public and private buildings (PPBs). The appropriate MLA can also be selected in different occupancy patterns for seasonal variations, ventilation behavior, building type and locations, as well as current indoor air pollution control strategies. Furthermore, the conceptual framework showed that MLA application such as algorithm design/Model Predictive Control (MPC) integration can alleviate the high spread limitation of COVID-19 in the indoor environment.

Finally, the research concludes that a large unexploited potential within integration and innovation is recognized in the DCV system and MLAs which can be improved to optimize level of IAQ from the perspective of health throughout the building sector DCV process systems. The requirements of CO₂ based DCV along with VOC concentrations monitoring practice should be taken into consideration through further research and experience with adaption and implementation from the ventilation control initial stage of the DCV process.