Search results

This study aims to explore the empirical correlation between patient flow issues, quality of green health services and patient satisfaction in specialist medical department factors from patients’ perspectives as service consumers.

This research is a type of nonintervention empirical research that uses an open survey to explore the views and experiences of users of specialist medical department services. The targeted population is hospital patients included in the top five national PERSI (Indonesian Hospital Association) Award 2022 Green Hospital Category, with a total number of respondents of 572 people. This study uses the partial least square-structural equation modeling analysis method with the SmartPLS application.

Patient flow problems generally affect the quality of eco-friendly health services, except for the waiting time problem, which affects service quality. It should be understood as a top priority for patients to receive services from medical specialists without risking time as a core service aspect from the patient’s perspective. In addition, all variables in eco-friendly hospital services affect patient satisfaction, except in the case of visits to specialist medical departments, which do not affect medical support services and hospital practices that are responsive to the delivery of care services resulting from medical support services that are inseparable in integrated services as well as health care following medical ethics.

This study has a novelty in understanding the implications of green practice in determining patient satisfaction in medical specialist department as the epicenter of hospital services and the main object of assessment for the quality of hospital services.

Heating, ventilating, air-conditioning and cooling (HVAC) systems are crucial in daily health-care facility services. Design-related defects can lead to maintenance issues, causing service disruptions and cost overruns. These defects can be avoided if a link between the early design stages and maintenance feedback is established. This study aims to use experts’ experience in HVAC maintenance in health-care facilities to list and evaluate the risk of each maintenance issue caused by a design defect, supported by the literature.

Following semistructured interviews with experts, 41 maintenance issues were identified as the most encountered issues. Subsequently, a survey was conducted in which 44 participants evaluated the probability and impact of each design-caused issue.

Chillers were identified as the HVAC components most prone to design defects and cost impact. However, air distribution ducts and air handling units are the most critical HVAC components for maintaining healthy conditions inside health-care facilities.

The unavailability of comprehensive data on the cost impacts of all design-related defects from multiple health-care facilities limits the ability of HVAC designers to furnish case studies and quantitative approaches.

This study helps HVAC designers acquire prior knowledge of decisions that may have led to unnecessary and avoidable maintenance. These design-related maintenance issues may cause unfavorable health and cost consequences.

Air transport accounts for nearly 40% worth of the global trade cargo volume, where more than 50% of the air cargo is carried on passenger flights. Therefore, this paper aims to focus on identifying the influencing factors for both passenger and cargo demand-driven networks to smoothen the global supply chain.

The data for the study was collected through literature reviews and interviews with industry experts. The analytical hierarchy process was used to analyze the expert's opinions on the critical factors affecting air cargo demand growth. Regression analysis was conducted using the selected variables to develop a model to calculate air cargo demand growth.

According to the expert opinion, it was identified that facilities under airport capacities and facilities are mainly affected by the air cargo carried by combi carriers. The model was developed considering the air connectivity index and air cargo demand at destination variables.

The factors identified here are mainly related to the current situation in Sri Lanka. Applying this methodology to other economic zones will add new factors related to their economic contexts and could be generalized as the influencing factors for the growth of air cargo demand by finding more results.

Previous studies have been conducted using different factors and models to forecast air cargo demand, and those did not consider demand from combi and all-cargo carriers together. More than 98% of air cargo trades in Sri Lanka are happening through combi carriers. Hence, Sri Lanka will be a best case study to analyze the behavior of combi carriers.

This paper aims to focus on a medical goods distribution problem and pharmacological waste collection by plug-in hybrid vehicles with some real-world restrictions. In this research, considering alternative energy sources and simultaneous pickup and delivery led to a decrease in greenhouse gas emissions and distribution costs, respectively.

Here, this problem has been modeled as mixed-integer linear programming with the traveling and energy consumption costs objective function. The GAMS was used for model-solving in small-size instances. Because the problem in this research is an NP-hard problem and solving real-size problems in a reasonable time is impossible, in this study, the artificial bee colony algorithm is used.

Then, the algorithm results are compared with a simulated annealing algorithm that recently was proposed in the literature. Finally, the results obtained from the exact solution and metaheuristic algorithms are compared, analyzed and reported. The results showed that the artificial bee colony algorithm has a good performance.

In this paper, medical goods distribution with pharmacological waste collection is studied. The paper was focused on plug-in hybrid vehicles with simultaneous pickup and delivery. The problem was modeled with environmental criteria. The traveling and energy consumption costs are considered as an objective function.

Despite considerable research on the subject, there is still some misunderstanding about what characterizes successful project delivery in construction projects. Evaluating project delivery success is crucial for organizations since it enables them to prepare for future growth through more effective project management mechanisms and rank the organization's projects for continuous improvement. There is considerable disagreement over a set of success criteria that can be applied to all kinds of projects when evaluating project delivery success, making it a complicated procedure for practitioners and scholars. This research seeks to alleviate the problem by validating and testing a systematic project delivery success model (3D integration model) in the Australian construction industry. The aim is to establish a dependable approach built upon prior research and reliable in evaluating delivery success for any project type.

Based on a novel project delivery success model, this research applies a case study methodology to analyse 40 construction projects undertaken by a single Australian project management consultancy. The research utilizes a mixed-method research approach and triangulates three sets of data. First, the project delivery success (PDS) scores of the projects are calculated by the model. Second, a qualitative analysis targeting the performance of the same projects using a different system called the performance assessment review (PAR) scores was obtained. These culminate in two sets of ranking. The third step seeks validation of results from the head of the partnering organization that has undertaken the projects.

The findings of this study indicate that the 3D integration model is accurate and reliable in measuring the success of project delivery in construction projects of various sizes, locations and durations. While the model uses six key performance indicators (KPIs) to measure delivery success, it is evident that three of these may significantly improve the likelihood of PDS: value, speed and impact. Project managers should focus on these priority aspects of performance to generate better results.

Restrictions inherent to the case study approach are identified for this mixed-method multiple-case study research. There is a limitation on the sample size in this study. Despite the researcher's best efforts, no other firm was willing to share such essential data; therefore, only 40 case studies could be analysed. Nonetheless, the number of case studies met the literature's requirements for adequate units for multiple-case research. This research only looked at Australian construction projects. Thus, the conclusions may not seem applicable to other countries or industries. The authors investigated testing the PDS in the construction sector. It can assist in improving efficiency and resource optimization in this area. Nonetheless, the same technique may be used to analyse and rank the success of non-construction projects.

Despite the research conducted previously on the PDS of construction projects, there is still confusion among researchers and practitioners about what constitutes a successful project delivery. Although several studies have attempted to address this confusion, no consensus on consistent performance metrics or a practical project success model has been formed. More importantly, (1) the ability to measure success across multiple project types, (2) the use of triple bottom line (TBL) to incorporate sustainability in evaluating delivery success and (3) the use of a complexity measurement tool to adjust delivery success scores set the 3D integration model apart from others.

The purpose of this study was to improve the overall equipment effectiveness (OEE) of the production process of the shredder operation of ABC company, an industrial waste management company which supplies pre-processed industrial waste as alternative fuel to a cement plant.

This case study investigated all possible availability and performance losses that caused the shredder system’s OEE and various problem-solving techniques, such as root cause analysis and Pareto analysis, were used to find the root cause of the reduced OEE.

After analysing this case study, three significant loss factors were identified from all the availability and performance losses, which caused the shredder system’s OEE losses. Practical solutions were found for the effect of those loss factors to improve the machine’s OEE and productivity.

This case study has been concentrated on only analysing of losses and improvement of OEE in the production process and not about cost analysis between loss and improvements.

This paper shows how to improve the OEE of a production process through various problem-solving techniques by identifying its losses and how to achieve the best solutions for those losses in a practical manner.

This study aims to minimize the cost and time of blood delivery in the whole blood supply chain network (BSCN) in disaster conditions. In other words, integrating all strategic, tactical and operational decisions of three levels of blood collection, processing and distribution leads to satisfying the demand at the right time.

This paper proposes an integrated BSCN in disaster conditions to consider four categories of facilities, including temporary blood collection centers, field hospitals, main blood processing centers and medical centers, to optimize demand response time appropriately. The proposed model applies the location of all permanent and emergency facilities in three levels: blood collection, processing and distribution. Other essential decisions, including multipurpose facilities, emergency transportation, inventory and allocation, were also used in the model. The LP metric method is applied to solve the proposed bi-objective mathematical model for the BSCN.

The findings show that this model clarifies its efficiency in the total cost and blood delivery time reduction, which results in a low carbon transmission of the blood supply chain.

The researchers proposed an integrated BSCN in disaster conditions to minimize the cost and time of blood delivery. They considered multipurpose capabilities for facilities (e.g. field hospitals are responsible for the three purposes of blood collection, processing and distribution), and so locating permanent and emergency facilities at three levels of blood collection, processing and distribution, support facilities, emergency transportation and traffic on the route with pollution were used to present a new model.

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.

The aging population, a higher proportion of older adults (aged 65+), is considered a global and severe problem, while the information systems (IS) literature on detecting the relationship between the aging population and the development of electronic commerce (e-commerce) is limited and insufficient. Hence, the main objective of this paper is to examine whether an aging population can moderate the effect of infrastructure constructions on e-commerce sales and whether an aging population can affect e-commerce sales.

To investigate the relationship between the aging population and e-commerce sales, this study proposes two potential influential mechanisms: moderating the effects of infrastructure development on e-commerce sales and direct influence. Subsequently, a sample of 31 Chinese provinces from 2013 to 2019 is utilized to conduct regression analyses in order to examine these hypotheses.

The findings suggest that the development of urban transportation infrastructure and network constructions can significantly contribute to the enhancement of e-commerce sales, and the influence cannot be affected by aging population. Furthermore, it is noteworthy that an aging population can have a positive effect on e-commerce sales.

The findings can inform future infrastructure constructions by assessing the potential of infrastructure projects to boost e-commerce sales and examining whether this effect varies in an aging population context.

The findings substantiate the pivotal role of older adults in the e-commerce industry. Moreover, the obtained results establish a positive relationship between an aging population and e-commerce sales, thereby offering diverse perspectives on existing theories.