Search results

This study aims to evaluate the efficiency of various techniques for enhancing indoor air quality (IAQ) in construction. It analyzed the alterations in the concentration of indoor air pollutants over time for each product employed in controlling pollution sources and removing it, which included eco-friendly substances and adsorbents. The study will provide more precise and dependable data on the effectiveness of these control methods, ultimately supporting the creation of more efficient and sustainable approaches for managing indoor air pollution in buildings.

The research investigates the impact of eco-friendly materials and adsorbents on improving indoor air quality (IAQ) in Dubai's tall apartment buildings. Field experiments were conducted in six units of The Gate Tower, comparing the IAQ of three units built with “excellent” grade eco-friendly materials with three built with “good” grade materials. Another experiment evaluated two adsorbent products (H and Z) in the Majestic Tower over six months. Results indicate that “excellent” grade materials significantly reduced toluene emissions. Adsorbent product Z showed promising results in pollutant reduction, but there is concern about the long-term behavior of adsorbed chemicals. The study emphasizes further research on household pollutant management.

The research studied the effects of eco-friendly materials and adsorbents on indoor air quality in Dubai's new apartments. It found that apartments using “excellent” eco-friendly materials had significantly better air quality, particularly reduced toluene concentrations, compared to those using “good” materials. However, high formaldehyde (HCHO) emissions were observed from wood products. While certain construction materials led to increased ethylbenzene and xylene levels, adsorbent product Z showed promise in reducing pollutants. Yet, there is a potential concern about the long-term rerelease of these trapped chemicals. The study emphasizes the need for ongoing research in indoor pollutant management.

The research, while extensive, faced limitations in assessing the long-term behavior of adsorbed chemicals, particularly the potential for rereleasing trapped pollutants over time. Despite the study spanning a considerable period, indoor air pollutant concentrations in target households did not stabilize, making it challenging to determine definitive improvement effects and reduction rates among products. Comparisons were primarily relative between target units, and the rapid rise in pollutants during furniture introduction warrants further examination. Consequently, while the research provides essential insights, it underscores the need for more prolonged and comprehensive evaluations to fully understand the materials' and adsorbents' impacts on indoor air quality.

The research underscores the importance of choosing eco-friendly materials in new apartment constructions for better IAQ. Specifically, using “excellent” graded materials can significantly reduce harmful pollutants like toluene. However, the study also highlights that certain construction activities, such as introducing furniture, can rapidly elevate pollutant levels. Moreover, while adsorbents like product Z showed promise in reducing pollutants, there is potential for adsorbed chemicals to be rereleased over time. For practical implementation, prioritizing higher-grade eco-friendly materials and further investigation into furniture emissions and long-term behavior of adsorbents can lead to healthier indoor environments in newly built apartments.

The research offers a unique empirical assessment of eco-friendly materials' impact on indoor air quality within Dubai's rapidly constructed apartment buildings. Through field experiments, it directly compares different material grades, providing concrete data on pollutant levels in newly built environments. Additionally, it explores the efficacy of specific adsorbents, which is of high value to the construction and public health sectors. The findings shed light on how construction choices can influence indoor air pollution, offering valuable insights to builders, policymakers and residents aiming to promote public health and safety in urban living spaces.

This paper analyzes how air pollution and the public attention to it influence the returns of stocks in the Indian context.

The study uses firm-level data for the stocks listed on National Stock Exchange in India. Air quality is measured using the Air Quality Index (AQI) values provided by US Embassy and Consulates’ Air Quality Monitor in India. Google Search Volume Index (GSVI) of the relevant terms acts as the measure of public attention. Appropriate regression models are used to address how AQI and attention influence stock returns.

It is observed that degrading air quality alone is unable to explain the stock returns. It is the combined effect of increasing AQI and subsequent rise in associated public attention that negatively impacts these returns. Returns of firms with poor environment score component in their environmental, social, governance (ESG) scores are more negatively affected compared to firms with higher environment scores.

Investors can make use of this knowledge to formulate effective trading strategies and ensure higher chances of profitability in the share market.

To the knowledge of the authors, no earlier study has investigated the effects of AQI and attention together to explain stock price movements. The study is conducted in the Indian context providing a unique opportunity to study the behavioral impact of these effects in one of the fastest growing global economies, which is also plagued by an alarming increase in ambient air pollution.

This paper aims to explore the efficiency of natural ventilation in the bedrooms of typical two-storeyed row houses with newly reconfigured design that incorporate rooftop wind catchers and side windows to create cross ventilation.

A CFD program was used to assess average air velocity coefficient (Cv) in 32 airflow cases. Parameters include location of openings with respect to wind direction, inlet-to-outlet area ratio (IOR) and opening-to-floor area ratio (OFR).

The results reveal that indoor air velocities in the cases of air entering wind catchers are generally higher than those in the cases of air entering side windows while air velocities at the openings are the opposite. The IOR of 1:2 provides best results in terms of both velocities of the indoor air and velocities at the openings. Increasing the OFR from 20% to 50% generally improves indoor air velocities and airflow rates.

This study proved that the new solution of combining one-sided wind catchers and side windows can effectively solve the problem of ventilation uniquely existing in the conditions of typical row houses by catching prevailing wind from two opposite directions into multiple rooms. The results are given as non-dimensional air velocities, which can be interpreted with any climatic data, and therefore can be applied to row houses in any locations and climatic conditions. The findings can create a new and efficient design of row houses that benefits building industry.

To significantly adopt and improve indoor energy efficiency in building infrastructure in developing countries can be a challenging venture. Thus, this study aimed to assess the satisfaction of indoor environmental quality and its effect on energy use intensity and efficient among student housing.

The study is quantitative and hinged on the contrast theory. A survey of 1,078 student residents living in purpose-built student housing was contacted. Using Post-Occupancy Evaluation and Multiple Linear Regression, critical variables such as thermal comfort, visual comfort and indoor air quality and 21 indicators were assessed. Data on annual energy consumption and total square metre of the indoor area were utilised to assess energy use intensity.

The study found a direct relationship between satisfaction with indoor environmental quality and energy use intensity. The study showed that students were more satisfied with thermal comfort conditions than visual and indoor air quality. Overall, these indicators contributed to 75.9% kWh/m² minimum and 43.2% kWh/m² maximum energy use intensity in student housing in Ghana. High occupancy and small useable space in student housing resulted in high energy use intensity.

Inclusions of sustainable designs and installation of smart mechanical systems are feedback to student housing designers. Again, adaptation to retrofitting ideas can facilitate energy efficiency in the current state of student housing in Ghana.

Earlier studies have argued for and against the satisfaction of indoor environmental quality in student housing. However, these studies have neglected to examine the impact on energy use intensity. This is novel because the assessment of energy use intensity in this study has a positive influence on active design incorporation among student housing.

Exposure to poor indoor air in refurbished buildings is a matter of health concern due to the growing concentrations of various contaminants as a result of building airtightness without amendment of ventilation, or the use of building materials such as glue, paint, thinner and varnishes. Recent studies have been conducted to measure indoor air pollutants and assess the health risks affecting the quality of life, productivity and well-being of human beings. However, limited review studies have been recently conducted to provide an overview of the state of knowledge. This study aims to conduct a scoping review of indoor air quality (IAQ) in the context of refurbished or energy-retrofitted buildings.

A systematic screening process based on the PRISMA protocol was followed to extract relevant articles. Web of Science, Scopus, Google Scholar and PubMed were searched using customised search formulas. Among 276 potentially relevant records, 38 studies were included in the final review covering a period from 2015 to 2022.

Researchers mapped out the measured compounds in the selected studies and found that carbon dioxide (CO₂) (11%) and total volatile organic compounds (11%) were among the most commonly measured contaminants. Two trends of research were found including (1) the impact of ventilative properties on IAQ and (2) the impact of introducing building materials on IAQ.

The contribution of this study lies in summarising evidence on IAQ measurements in refurbished buildings, discussing recent advancements, revealing significant gaps and limitations, identifying the trends of research and drawing conclusions regarding future research directions on the topic.

Rising damp affects the deterioration and conservation of architectural heritage. Air cavities built next to the base of these buildings on an unsaturated floor can reduce the damage to foundations and walls due to this. These are passive systems, which are usually designed with no objective data to show their functioning and effectiveness. This is why the authors are presenting this study.

This study is presented starting with simple field equipment for representative types for a previous cataloguing of cases in Spain. The physical parameters of the air in this research are air speed and evaporation in the cavities and the base, taking the local climate and the particular formal and construction characteristics of each case study as a reference.

The results of the analysis validate the method and the efficiency of such cavities, whose performance is greater in systems with a variety of features, that is to say, those which work by thermal or wind flow rather than those which only use hygric flow.

This work is novel because there are not in situ experimental works which prove the functioning and effectiveness of these systems.

This paper investigates thermal mass performance (TMP) in hot climates. The impact of using precast concrete (PC) as a core envelope with different insulation materials has been studied. The aim is to find the effect of building mass with different weights on indoor energy consumption, specifically cooling load in hot climates.

This research adopted a case study and simulation methods to find out the efficiency of different mass performances in hot and humid climate conditions. Different scenarios of light, moderate and heavyweight mass using PC have been developed and simulated. The impact of these scenarios on indoor cooling load has been investigated using the integrated environment solution-virtual environment (IES-VE) software.

The results showed that adopting a moderate weight mass of two PC sheets and a cavity layer in between can reduce indoor air temperature by 1.17 °C; however, this type of mass may increase the cooling demand. On the other hand, it has been proven that adopting a heavyweight mass for building envelopes and increasing the insulation material has a significant impact on reducing the cooling load. Using a PC Sandwich panel and increasing the insulation material layers for external walls and thickness by 50 mm will reduce the cooling load by 15.8%. Therefore, the heavyweight mass is more efficient compared to lightweight and moderate mass in hot, humid climate areas such as the UAE, in spite of the positive indoor TMP that can be provided by the lightweight mass in reducing the indoor air temperature in the summer season.

This research contributes to the thermal mass concept as one of these strategies that have recently been adopted to optimize the thermal performance of buildings and developments. Efficient TMP can have a massive impact on reducing energy consumption. However, less work has investigated TMP in hot and humid climate conditions. Furthermore, the impact of the PC on indoor thermal performance within hot climate areas has not been studied yet. The findings of this study on TMP in the summer season can be generated in all hot climate zones, and investigating the TMP in other seasons can be extended in future studies.

Modern human society has continuous advancements that have a negative impact on the quality of the air. Daily transportation, industrial and residential operations churn up dangerous contaminants in our surroundings. Addressing air pollution issues is critical for human health and ecosystems, particularly in developing countries such as Egypt. Excessive levels of pollutants have been linked to a variety of circulatory, respiratory and nervous illnesses. To this end, the purpose of this research paper is to forecast air pollution concentrations in Egypt based on time series analysis.

Deep learning models are leveraged to analyze air quality time series in the 6th of October City, Egypt. In this regard, convolutional neural network (CNN), long short-term memory network and multilayer perceptron neural network models are used to forecast the overall concentrations of sulfur dioxide (SO₂) and particulate matter 10 µm in diameter (PM₁₀). The models are trained and validated by using monthly data available from the Egyptian Environmental Affairs Agency between December 2014 and July 2020. The performance measures such as determination coefficient, root mean square error and mean absolute error are used to evaluate the outcomes of models.

The CNN model exhibits the best performance in terms of forecasting pollutant concentrations 3, 6, 9 and 12 months ahead. Finally, using data from December 2014 to July 2021, the CNN model is used to anticipate the pollutant concentrations 12 months ahead. In July 2022, the overall concentrations of SO₂ and PM₁₀ are expected to reach 10 and 127 µg/m³, respectively. The developed model could aid decision-makers, practitioners and local authorities in planning and implementing various interventions to mitigate their negative influences on the population and environment.

This research introduces the development of an efficient time-series model that can project the future concentrations of particulate and gaseous air pollutants in Egypt. This research study offers the first time application of deep learning models to forecast the air quality in Egypt. This research study examines the performance of machine learning approaches and deep learning techniques to forecast sulfur dioxide and particular matter concentrations using standard performance metrics.

During the COVID-19 pandemic in 2020–2021 in Indonesia, the indoor environmental quality (IEQ) of local houses occupied by infected occupants was adversely affected. This paper aims to appraise the IEQ of the affected Banda Aceh houses with insights into enabling them to be resilient against the negative impacts of the pandemic.

Quantitative field measurement in the case study of five concrete houses located in urban areas which are affected by IEQ factors: (1) indoor air quality (IAQ), (2) thermal comfort and (3) visual comfort, compared against the Indonesian National standard (SNI). The case study involved measurement of the first two factors over 24 h, while the third factor was measured during sun hours. Considering the limitations of the measuring tools for logging available data in this research, air quality is measured from 8 am to 10 pm.

Thermal comfort in the affected houses is generally regarded as warm, optimal and cool comfort, indicated by the effective temperatures of between 20.5 and 27.1°C. Frequently closed windows, limited land area and access had caused a lack of air circulation, with air velocity of dominantly 0 m/s in the houses. The illuminance of natural light received in three houses was insufficient – less than 120 lux as compared with the other two. This study found an uptrend of higher air temperature and relative humidity in the affected houses resulting in poorer IAQ; conversely, the higher the air velocity in the houses, the fewer the indoor air pollutants such as formaldehyde (HCHO), total volatile organic compounds (TVOC) and carbon dioxide (CO₂₎.

This study is a pioneer in evaluating IEQ in houses occupied by COVID-19 patients in Indonesia, especially in dwelling cases in Aceh Province. It also encompasses environmental and societal challenges to sustaining resilient buildings in pandemic hit regions.

This paper examines the long-run and dynamic causal relationship among air pollution, health expenditure and economic growth in Mexico, Indonesia, Nigeria and Turkey (MINT countries).

The bounds test approach to cointegration and causality test was employed on data covering 1995–2018.

The study shows evidence of a long-run relationship among the variables in MINT countries and the causality test confirms the existence of a bidirectional causal nexus between health expenditure and economic growth in the four countries. It also confirms that there is a bidirectional causal relationship between carbon dioxide (CO₂) emission and economic growth, except in Nigeria where a unidirectional causal relationship was found running from CO₂ emissions to economic growth. In addition, a bidirectional causal relationship was found between air pollution and health expenditure in Turkey, while no causal relationship was found among these variables in Nigeria.

This study is limited by available data and it only focuses on four emerging economies. To address this, future studies can expand this scope to more emerging economies with severe air pollution and also extend the scope when more recent data becomes available.

This study suggests that pollution standards in MINT countries should be monitored and enforced with transparency so as to mitigate its health implications and ensure the sustainability of economic growth.

The study confirms the importance of keeping air pollution as low as possible because of its negative effect on health and economic output.

The study accounts for the complexity of each MINT country instead of providing a general discussion on the relationship between air pollution, health expenditure and economic growth in MINT countries.