Search results

The purpose of this research is a study into a mathematical approach of a tailless aircraft dynamic stability analysis. This research is focused on investigation of influence of elevons (elevator) on stability derivatives and consequently on the aircraft longitudinal dynamic stability. The main research question is to determine whether this impact should be taken into account on the conceptual and preliminary stage of the analysis of the longitudinal dynamic stability.

Aerodynamic coefficients and longitudinal stability derivatives were computed by Panukl (panel methods). The analysis of the dynamic stability of the tailless aircraft was made by the Matlab code and SDSA package.

The main result of the research is a comparison of the dynamic stability of the tailless aircraft for different approaches, with and without the impact of elevator deflection on the trim drag and stability derivatives.

This paper presents research that mostly should be considered on the preliminary stage of aircraft design and dynamic stability analysis. The impact of elevons deflection on the aircraft moment of inertia has been omitted.

The results of this research will be useful for the further design of small tailless unmanned aerial vehicles (UAVs).

This research reveals that in case of the analysis of small tailless UAVs, the impact of elevons deflection on stability derivatives is bigger than the impact of a Mach number. This impact should be taken into consideration, especially for a phugoid mode.

Tandem wing aircrafts belong to an unconventional configurations group, and this type of design is characterised by a strong aerodynamic coupling, which results in lower induced drag. The purpose of this paper is to determine whether a certain trend in the wingspan impact on aircraft dynamic stability can be identified. The secondary goal was to compare the response to control of flaps placed on a front and rear wing.

The aerodynamic data and control derivatives were obtained from the computational fluid dynamics computations performed by the MGAERO software. The equations of aircraft longitudinal motion in a state space form were used. The equations were built based on the aerodynamic coefficients, stability and control derivatives. The analysis of the dynamic stability was done in the MATLAB by solving the eigenvalue problem. The response to control was computed by the step response method using MATLAB.

The results of this study showed that because of a strong aerodynamic coupling, a nonlinear relation between the wing size and aircraft dynamic stability proprieties was observed. In the case of the flap deflection, stronger oscillation was observed for the front flap.

Results of dynamic stability of aircraft in the tandem wing configuration can be found in the literature, but those studies show outcomes of a single configuration, while this paper presents a comprehensive investigation into the impact of wingspan on aircraft dynamic stability. The results reveal that because of a strong aerodynamic coupling, the relation between the span factor and dynamic stability is nonlinear. Also, it has been demonstrated that the configuration of two wings with the same span is not the optimal one from the aerodynamic point of view.

According to the study of the space flight market, there is a demand for space suborbital flights including commercial tourist flights. However, one of the challenges is to design a mission and a vehicle that could offer flights with relatively low G-loads. The project of the rocket-plane in a strake-wing configuration was undertaken to check if such a design could meet the FAA recommendation for this kind of flight. The project concept assumes that the rocket plane is released from a slowly flying carrier plane, then climbs above 100 kilometers above sea level and returns in a glide flight using a vortex lift generated by the strake-wing configuration. Such a mission has to include a flight transition during the release and return phases which might not be comfortable for passengers. Verification if FAA recommendation is fulfilled during these transition maneuvers was the purpose of this study.

The project was focused on the numerical investigation of a possibility to perform transition maneuvers mentioned above in a passenger-friendly way. The numerical simulations of a full-scale rocket-plane were performed using the simulation and dynamic stability analyzer (SDSA) software package. The influence of an elevator deflection change on flight parameters was investigated in two cases: a transition from the steep descent at high angles of attack to the level glide just after rocket-plane release from the carrier and an analogous transition after re-entry to the atmosphere. In particular, G-loads and G-rates were analyzed.

As a result, it was found that the values of these parameters satisfied the specific requirements during the separation and transition from a steep descent to gliding. They would be acceptable for an average passenger.

To verify the modeling approach, a flight test campaign was performed. During the experiment, a rocket-plane scaled model was released from the RC model helicopter. The rocket-plane model was geometrically similar only. Froude scales were not applied because they would cause excessive technical complications. Therefore, a separate simulation of the experiment with the application of the scaled model was performed in the SDSA software package. Results of this simulation appeared to be comparable to flight test results so it can be concluded that results for the full-scale rocket-plane simulation are also realistic.

It was proven that the rocket-plane in a strake-wing configuration could meet the FAA recommendation concerning G-loads and G rates during suborbital flight. Moreover, it was proven that the SDSA software package could be applied successfully to simulate flight characteristics of airplanes flying at angles of attack not only lower than stall angles but also greater than stall angles.

The application of rocket-planes in a strake-wing configuration could make suborbital tourist flights more popular, thus facilitating the development of manned space flights and contributing to their cost reduction. That is why it was so important to prove that they could meet the FAA recommendation for this kind of service.

The original design of the rocket plane was analyzed. It is equipped with an optimized strake wing and is controlled with oblique, all moving, wingtip plates. Its post-stall flight characteristics were simulated with the application of the SDSA software package which was previously validated only for angles of attack smaller than stall angle. Therefore, experimental validation was necessary. However, because of excessive technical problems caused by the application of Froude scales it was not possible to perform a conventional test with a dynamically scaled model. Therefore, the geometrically scaled model was built and flight tested. Then a separate simulation of the experiment with the application of this model was performed. Results of this separate simulation were compared with the results of the flight test. This comparison allowed to draw the conclusion on the applicability of the SDSA software for post-stall analyzes and, indirectly, on the applicability of the proposed rocket-plane for tourist suborbital flights. This approach to the experimental verification of numerical simulations is quite unique. Finally, a quite original method of the model launching during flight test experiment was applied.

The purpose of this paper is to present the results of a conceptual design of Martian aircraft. This study focuses on the aerodynamic and longitudinal dynamic stability analysis. The main research questions are as follows: Does a tailless aircraft configuration can be used for Martian aircraft? How to the short period characteristic can be improved by side plates modification?

Because of a conceptual design stage of this Martian aircraft, aerodynamic characterises were computed by the Panukl package by using the potential flow model. The longitudinal dynamic stability was computed by MATLAB code, and the derivatives computed by the SDSA software were used as the input data. Different aircraft configurations have been studied, including different wing’s aerofoils and configurations of the side plate.

This paper presents results of aerodynamic characteristics computations and longitudinal dynamic stability analysis. This paper shows that tailless aircraft configuration has potential to be used as Martian aircraft. Moreover, the study of the impact of side plates’ configurations on the longitudinal dynamic stability is presented. This investigation reveals that the most effective method to improve the short period damping ratio is to change the height of the bottom plate.

The presented result might be useful in case of further design of the aircrafts for the Mars mission and designing the aircrafts in a tailless configuration.

It is considered by the human expedition that Mars is the most probable planet to explore. This paper presents the conceptual study of aircraft which can be used to take the high-resolution pictures of the surface of Mars, which can be crucial to find the right place to establish a potential Martian base.

Most of aircrafts proposed for the Mars mission are designed in a configuration with a classic tail; this paper shows a preliminary calculation of the tailless Martian aircraft. Moreover, this paper shows the results of a dynamic stability analysis, where similar papers about aircrafts for the Mars mission do not show such outcomes, especially in the case of the tailless configuration. Moreover, this paper presents the results of the dynamic stability analysis of tailless aircraft with different configurations of the side plates.

The aim of the research is to conduct a study into a configuration of an aircraft system with a focus on aerodynamics. In addition, trim condition and static stability constraints were included. The main application of this system is suborbital space flights. The presented concept of a modular airplane system (MAS) consists of two vehicles: a Rocket Plane and a Carrier. Both are designed in tailless configurations but coupled formed a classic tail aircraft configuration, where the Rocket Plane works as the empennage. The most important challenge is to define the mutual position of those two tailless vehicles under the assumption that each vehicle will be operating alone in different flight conditions while joined in one object create a conventional aircraft. Each vehicle configuration (separated and coupled) must fulfil static stability and trim requirements.

Aircrafts’ aerodynamic characteristics were obtained using the MGAERO software which is a commercial computing fluid dynamics tool created by AMI Aero. This software uses the Euler flow model. Results from this software were used in the static stability and trim condition analysis.

The main outcome of this investigation is a mutual position of the Rocket Plane and the Carrier that fulfils project requirements. Also, the final configuration of both separated vehicles (Rocket Plane and Carrier) and the complete MAS were defined. In addition, it was observed that in the case of classic aircraft configuration which is created by connecting two tailless vehicles increasing horizontal tail arm reduces static stability. This is related to a significantly higher mass ratio of the horizontal tail (the Rocket Plane) with respect to the whole system. Moving backward, the Rocket Plane has a notable effect on a position of a centre of gravity of the whole system static stability. Moreover, the impact of the mutual vehicles’ position (horizontal tail arm) and inclination angle on the coupled vehicle lift to drag ratio was analysed.

In terms of aerodynamic computation, MGAERO software using an inviscid flow model, therefore, both a friction drag and breakdown of vortex are not considered. But the presented research is for the computation stage of the design, and the MGAERO software guarantees satisfactory accuracy with respect to the relatively low time of computations. The second limitation is that the presented results are for the conceptual stage of the design and dynamic stability constraints were not taken into account.

The ultimate goal of the coupled aircraft project is to conduct flying tests and the presented result is one of the milestones to achieve this goal.

A design process for a conventional aircraft configuration is well known however, there are not many examples of vehicles that consist of two coupled aircrafts where both vehicles have similar mass. The unique part of this paper includes results of the investigation of the mutual position of the vehicles that can fly alone, as well as in coupled form. The impact of the position of the centre of gravity on trim conditions and static stability of the coupled configuration was investigated.

The purpose of this paper is to present the varied roles played by the University of Lódz (UL) in maintaining and restoring the natural capital of a city as a driver for sustainable city development. The higher education institution can be perceived as visionary, originator and executor of natural capital projects.

The paper analyses three cases performed by the Faculty of Biology and Environmental Protection, UL, in the city of Lódz. The activities are based on different scales ranging from city-wide to local, e.g. river and green infrastructure, and which vary in character from policy planning to implementation.

Natural capital projects influence city development on different levels: by the initiation of legal protection, by the implementation of rehabilitation concepts for rivers and by influencing the strategic documents for mid-term and long-term urban development.

The university has the potential for multidisciplinary engagement in the development of urban sustainability. In large-scale projects, academics play a more conceptual role, in capacity building and knowledge transfer, while in local-scale implementations, their role includes innovation, know-how and technology transfer. Moreover, it may act as a reinforcement hub, by safeguarding and strengthening the natural capital of the city.