Search results

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on properties of low calcium fly ash (FA)-based geopolymer concrete (GPC) cured at oven temperature. Further, this paper aims to study the effect of partial replacement of FA by ground granulated blast slag (GGBS) in GPC made with both NCA and RCA cured under ambient temperature curing.

M25 grade of ordinary Portland cement (OPC) concrete was designed according to IS: 10262-2019 with 100% NCA as control concrete. Since no standard guidelines are available in the literature for GPC, the same mix proportion was adopted for the GPC by replacing the OPC with 100% FA and W/C ratio by alkalinity/binder ratio. All FA-based GPC mixes were prepared with 12 M of sodium hydroxide (NaOH) and an alkalinity ratio, i.e. sodium hydroxide to sodium silicate (NaOH:Na₂SiO₃) of 1:1.5, subjected to 90^°C temperature for 48 h of curing. The NCA were replaced with 50% and 100% RCA in both OPC and GPC mixes. Further, FA was partially replaced with 15% GGBS in GPC made with the above percentages of NCA and RCA, and they were given ambient temperature curing with the same molarity of NaOH and alkalinity ratio.

The workability, compressive strength, split tensile strength, flexural strength, water absorption, density, volume of voids and rebound hammer value of all the mixes were studied. Further, the relationship between compressive strength and other mechanical properties of GPC mixes were established and compared with the well-established relationships available for conventional concrete. From the experimental results, it is found that the compressive strength of GPC under ambient curing condition at 28 days with 100% NCA, 50% RCA and 100% RCA were, respectively, 14.8%, 12.85% and 17.76% higher than those of OPC concrete. Further, it is found that 85% FA and 15% GGBS-based GPC with RCA under ambient curing shown superior performance than OPC concrete and FA-based GPC cured under oven curing.

The scope of the present paper is limited to replace the FA by 15% GGBS. Further, only 50% and 100% RCA are used in place of natural aggregate. However, in future study, the replacement of FA by different amounts of GGBS (20%, 25%, 30% and 35%) may be tried to decide the optimum utilisation of GGBS so that the applications of GPC can be widely used in cast in situ applications, i.e. under ambient curing condition. Further, in the present study, the natural aggregate is replaced with only 50% and 100% RCA in GPC. However, further investigations may be carried out by considering different percentages between 50 and 100 with the optimum compositions of FA and GGBS to enhance the use of RCA in GPC applications. The present study is further limited to only the mechanical properties and a few other properties of GPC. For wider use of GPC under ambient curing conditions, the structural performance of GPC needs to be understood. Therefore, the structural performance of GPC subjected to different loadings under ambient curing with RCA to be investigated in future study.

The replacement percentage of natural aggregate by RCA may be further enhanced to 50% in GPC under ambient curing condition without compromising on the mechanical properties of concrete. This may be a good alternative for OPC and natural aggregate to reduce pollution and leads sustainability in the construction.

This chapter provides an empirical assessment of the effects of infrastructure provision on structural change and aggregate productivity using industrylevel data for a set of developed and developing countries over 1995–2010. A distinctive feature of the empirical strategy followed is that it allows the measurement of the resource reallocation directly attributable to infrastructure provision. To achieve this, a two-level top-down decomposition of aggregate productivity that combines and extends several strands of the literature is proposed. The empirical application reveals significant production losses attributable to misallocation of inputs across firms, especially among African countries. Also, the results show that infrastructure provision has stimulated aggregate total factor productivity growth through both within and between industry productivity gains.

Unlike other types of corporate disclosure, corporate political disclosure (CPD), which is the disclosure of corporate political contributions and the related governing policies and oversight mechanisms, does not provide completely new information to stakeholders. Some of the information disclosed in CPD is available from other public records (e.g. the Federal Election Committee website or OpenSecrets website). Given this unique feature of CPD, it is interesting to investigate the cost and benefit tradeoff for firms of altering their CPD practice in response to policy and political uncertainty.

This study employs recently developed indexes of aggregate economic policy uncertainty (EPU) and a novel dataset of CPD transparency to examine the impact of EPU on CPD transparency and how the proprietary cost of corporate political activities moderates this association. The sample consists of S&P 500 companies from the 2012 to 2019 period.

The authors document that firms mitigate the heightened information asymmetry associated with higher aggregate EPU by increasing CPD transparency. The positive association between EPU and CPD is less pronounced for firms that are more sensitive to EPU, for firms that more actively manage EPU through corporate political contributions or lobbying activities and for firms that are followed by more analysts. The authors also find that more transparent CPD helps to mitigate the information asymmetry caused by heightened EPU. This study’s results hold when the authors control for other types of voluntary corporate disclosure.

This study contributes to the emerging literature on the determinants of CPD transparency by identifying EPU's positive impact on CPD transparency. This study also provides empirical evidence that the proprietary costs arising from the controversial nature of corporate political activities dampen firms' incentives to provide transparent CPD in response to heightened EPU, and that information on corporate political activities gathered and processed by financial analysts seems to lower the marginal benefit to companies of publicizing CPD on their own website.

This study aims to consider environmental sustainability, a global challenge under the preview of sustainable development goals, highlighting the significance of knowledge economy in attaining sustainable aggregate demand behavior globally. For this purpose, 155 countries that have data available from 1995 to 2021 were selected. The purpose of selecting these countries is to test the global responsibility of the knowledge economy to attain environmental sustainability.

Results are estimated with the help of panel quantile regression. The empirical existence of aggregate demand-based environmental Kuznets curve (EKC) was tested using non-linear tests. Moreover, principal component analysis has been incorporated to construct the knowledge economy index.

U-shaped aggregate demand-based EKC at global level is validated. However, environmental deterioration increases with an additional escalation after US$497.945m in aggregate demand. As a determinant, the knowledge economy is reducing CO₂ emissions. The knowledge economy has played a significant role in global responsibility, shifting the EKC downward and extending the CO₂ reduction phase for every selected country. Further, urbanization, energy intensity, financial development and trade openness significantly deteriorate the environmental quality.

This study contains the empirical existence of aggregate demand-based EKC. The role of the knowledge economy is examined through an index which is calculated by using four pillars of the knowledge economy (technology, innovations, education and institutions). This study is based on a combined panel of all the countries for which the data was available.

This study aimed to review various existing methods for improving the quality of recycled concrete aggregates (RCAs) as a possible substitution for natural aggregates (NAs) in concrete. It is vital as the old paste attached to the RCA weakens its structure. It is due to the porous structure of the RCA with cracks, weakening the interfacial transition zone (ITZ) between the RCA and binding material, negatively impacting the concrete's properties. To this end, various methods for reinforcement of the RCA, cleaning the RCA's old paste and enhancing the quality of the RCA-based concrete without RCA modification are studied in terms of environmental effects, cost and technical matters. Furthermore, this research sought to identify gaps in knowledge and future research directions.

The review of the relevant journal papers revealed that various methods exist for improving the properties of RCAs and RCA-based concrete. A decision matrix was developed and implemented for ranking these techniques based on environmental, economic and technical criteria.

The identified methods for reinforcement of the RCA include accelerated carbonation, bio deposition, soaking in polymer emulsions, soaking in waterproofing admixture, soaking in sodium silicate, soaking in nanoparticles and coating with geopolymer slurry. Moreover, cleaning the RCA's old paste is possible using acid, water, heating, thermal and mechanical treatment, thermo-mechanical and electro-dynamic treatment. Added to these treatment techniques, using RCA in saturated surface dry (SSD) mixing approaches and adding fibres or pozzolana enhance the quality of the RCA-based concrete without RCA modification. The study ranked these techniques based on environmental, economic and technical criteria. Ultimately, adding fibres, pozzolana and coating RCA with geopolymer slurry were introduced as the best techniques based on the nominated criteria.

The study supported the need for better knowledge regarding the existing treatment techniques for RCA improvement. The outcomes of this research offer an understanding of each RCA enrichment technique's importance in environmental, economic and technical criteria.

The practicality of the RCA treatment techniques is based on economic, environmental and technical specifications for rating the existing treatment techniques.

The compressive strength of concrete depends on many interdependent parameters; its exact prediction is not that simple because of complex processes involved in strength development. This study aims to predict the compressive strength of normal concrete and high-performance concrete using four datasets.

In this paper, five established individual Machine Learning (ML) regression models have been compared: Decision Regression Tree, Random Forest Regression, Lasso Regression, Ridge Regression and Multiple-Linear regression. Four datasets were studied, two of which are previous research datasets, and two datasets are from the sophisticated lab using five established individual ML regression models.

The five statistical indicators like coefficient of determination (R²), mean absolute error, root mean squared error, Nash–Sutcliffe efficiency and mean absolute percentage error have been used to compare the performance of the models. The models are further compared using statistical indicators with previous studies. Lastly, to understand the variable effect of the predictor, the sensitivity and parametric analysis were carried out to find the performance of the variable.

The findings of this paper will allow readers to understand the factors involved in identifying the machine learning models and concrete datasets. In so doing, we hope that this research advances the toolset needed to predict compressive strength.

This study aims to examine the co-creation of customer experiences at different levels in service ecosystems, analyzing the case of a tourist destination.

A questionnaire was designed based on previously validated scales. The questionnaire was distributed through the social media platforms Facebook and Instagram. The survey yielded 1,476 valid responses for three types of destinations. Structural equation modeling and multigroup analysis were performed to test the hypotheses.

Aggregate service experience and memorable customer experience (MCE) in service ecosystems are determined by customer experiences at a dyadic level. Service experience at the ecosystem level is formed from ordinary experiences at the actor level, while MCE is formed from extraordinary experiences at the dyadic level. The type of ecosystem moderates the relationships between the variables but does not alter the importance of each of them.

The relationship between the co-creation of customer experiences at different levels of service ecosystems (dyadic vs aggregate) is addressed. A relationship is established between the ordinary and extraordinary character of experiences and their memorability at the ecosystem level.

The study aims to drive conceptual clarity around resistance to information technology projects, integrating multiple facets of the phenomenon from earlier studies.

The study conducts a meta-synthesis of qualitative studies on resistance to technology projects; it analyzes those studies at a case-specific level, compares and contrasts emergent concepts against each other, and “translates” those to the rest of the studies. The study uses the seven-step meta-ethnography method by Noblit and Hare to reciprocally translate emergent concepts to construct the conceptual model.

Through meta-synthesis, the study derives a new conceptual model for resistance to information technology projects, exemplifying how the identified antecedents create user resistance and how the phenomenon progresses within organizations.

This study enriches the observations and conclusions of past individual studies while explicating various facets of the mechanisms that generate and progress technology resistance within organizations. It offers fresh insights into the equivocal nature of the phenomenon and the distinctive ways it progresses from individual to group level.

Many ambitious and costly digital transformation efforts do not succeed due to user resistance. Understanding the mechanisms that create user resistance can help organizations manage technology projects better, thereby reducing the technology assimilation gap and protecting returns on related investments.

There have been extensive studies on technology acceptance (enablers) within organizations, while those relating to technology inhibitors are somewhat limited. However, the symmetry of understanding between enablers and inhibitors is vital for organizations to assimilate promising technologies and transform their business models. This model uses a new lens of sensemaking theory to explain how the antecedents trigger perceived threats and resistance behavior; it highlights the nuances around the development of resistance within individuals and its progression to groups. The resultant model offers better generalizability in organizational contexts.

Supplier selection along with continuous evaluation of their performance is a crucial activity in healthcare supply chain management for effective utilization of scarce resources while providing quality service at an affordable price, and minimizing chances of stock-out, avoiding serious consequences on the illness or fatality of the patients. Presence of both qualitative and quantitative evaluation criteria, set of potential suppliers and participation of different stakeholders with varying interest make healthcare supplier selection a challenging task which can be effectively solved using any of the multi-criteria decision making (MCDM) methods.

To deal with various qualitative criteria, like cost, quality, delivery performance, reliability, responsiveness and flexibility, this paper proposes integration of grey system theory with a newly developed MCDM tool, i.e. mixed aggregation by comprehensive normalization technique (MACONT) to identify the best performing supplier for pharmaceutical items in a healthcare unit from a pool of six competing alternatives based on the opinions of three healthcare professionals.

While assessing importance of the six evaluation criteria and performance of the alternative healthcare suppliers against those criteria using grey numbers, and exploring use of three normalization procedures and two aggregation operations of MACONT method, this integrated approach singles out S5 as the most compromised healthcare supplier for the considered problem. A sensitivity analysis of its ranking performance against varying values of both balance parameters and preference parameters also validates its solution accuracy and robustness.

This integrated approach can thus efficiently solve healthcare supplier selection problems based on qualitative evaluation criteria in uncertain group decision making environment. It can also be deployed to deal with other decision making problems in the healthcare sector, like supplier selection for healthcare devices, performance evaluation of healthcare units, ranking of physicians etc.

The purpose of this study is to provide new insights into the relationship between fiscal policy and total factor productivity (TFP) while accounting for several economic and econometric issues of the phenomenon like non-stationarity, fiscal feedback effects, persistence in productivity, country heterogeneity and unobserved global shocks and local spillovers affecting heterogeneously the countries in the sample.

The paper is empirical. It builds an Error Correction Model (ECM) specification within a dynamic heterogeneous framework with common correlated effects and models both reverse causality and feedback effects.

The results of this study highlight some new findings relative to the existing related literature. The outcomes suggest some relevant evidence at both the academic and policy levels: (1) the causal effects going from fiscal deficit/surplus to TFP are heterogeneous across countries; (2) the effects depend on the time horizon considered; (3) the long-run dynamics of TFP are positively impacted by improvements in fiscal budget, but only if the austerity measures do not exert slowdowns in aggregate growth.

The main originality of this study is methodological, with possible extensions to related phenomena. Relative to the existing literature, the gains of this study rely on the way econometric techniques, recently proposed in the literature, are adapted to the economic relationship of interest. The endogeneity due to the existence of reverse causality is modelled without implying relevant performance losses of the models. Moreover, this is the first article that questions whether the effects of fiscal budget on productivity depend on the impact of the former on aggregate output growth, thus emphasising the importance of the quality of fiscal adjustments.