Search results

In recent times, there has been a growing interest in buoyancy-induced heat transfer within confined enclosures due to its frequent occurrence in heat transfer processes across diverse engineering disciplines, including electronic cooling, solar technologies, nuclear reactor systems, heat exchangers and energy storage systems. Moreover, the reduction of entropy generation holds significant importance in engineering applications, as it contributes to enhancing thermal system performance. This study, a numerical investigation, aims to analyze entropy generation and natural convection flow in an inclined square enclosure filled with Ag–MgO/water and Ag–TiO2/water hybrid nanofluids under the influence of a magnetic field. The enclosure features heated slits along its bottom and left walls. Following the Boussinesq approximation, the convective flow arises from a horizontal temperature difference between the partially heated walls and the cold right wall.

The governing equations for laminar unsteady natural convection flow in a Newtonian, incompressible mixture is solved using a Marker-and-Cell-based finite difference method within a customized MATLAB code. The hybrid nanofluid’s effective thermal conductivity and viscosity are determined using spherical nanoparticle correlations.

The numerical investigations cover various parameters, including nanoparticle volume concentration, Hartmann number, Rayleigh number, heat source/sink effects and inclination angle. As the Hartmann and Rayleigh numbers increase, there is a significant enhancement in entropy generation. The average Nusselt number experiences a substantial increase at extremely high values of the Rayleigh number and inclination.

This numerical investigation explores advanced applications involving various combinations of influential parameters, different nanoparticles, enclosure inclinations and improved designs. The goal is to control fluid flow and enhance heat transfer rates to meet the demands of the Fourth Industrial Revolution.

In a 90° tilted enclosure, the addition of 5% hybrid nanoparticles to the base fluid resulted in a 17.139% increase in the heat transfer rate for Ag–MgO nanoparticles and a 16.4185% increase for Ag–TiO2 nanoparticles compared to the base fluid. It is observed that a 5% nanoparticle volume fraction results in an increased heat transfer rate, influenced by variations in both the Darcy and Rayleigh numbers. The study demonstrates that the Ag–MgO hybrid nanofluid exhibits superior heat transfer and fluid transport performance compared to the Ag–TiO2 hybrid nanofluid. The simulations pertain to the use of hybrid magnetic nanofluids in fuel cells, solar cavity receivers and the processing of electromagnetic nanomaterials in enclosed environments.

The purpose of this paper is to investigate the effect of inclined magnetic field, variable viscosity and Cattaneo–Christov heat and mass flux theories on the steady MHD free convective boundary layer flow of viscous, incompressible and electrically conducting water-driven silver and titanium-oxide nanofluids over a vertical stretching sheet.

The boundary layer equations of momentum, energy and nanoparticle concentration are partial differential equations in nature, which are reduced to nonlinear ordinary differential equations by means of similarity transformations. The resulting nonlinear equations are solved analytically by means of optimal homotopy analysis method.

Assessments with numerical results are performed and are found to be in an excellent agreement. Numerical results of the skin friction factor, the local Nusselt number and the local Sherwood number are obtained through tables. The effects of various physical parameters on the velocity, temperature and nanoparticles fraction are incorporated through graphs. The study analyzes the efficiency of heat transfer of nanofluids in cooling plants and rubber sheets.

No research works have been conducted to evaluate the effects of various physical phenomena on the copper and titanium nanofluids flow.

The nanofluid natural convection heat transfer in a hollow complex enclosure, which is named as Shamse knot shape, is studied numerically. This paper aims to present how the Rayleigh number, nanoparticle volume fraction, Hartmann number and hollow side length affect the fluid flow and heat transfer characteristics.

The continuity, momentum and energy equations have been solved using lattice Boltzmann method (LBM). Numerical simulation has been obtained for a wide range of Rayleigh number (10³ ≤ Ra ≤ 10⁶), nanoparticle volume fraction (0 ≤ ϕ 0.05) and Hartmann number (0 ≤ Ha ≤ 60) to analyze the fluid flow pattern and heat transfer characteristics. Moreover, the effect of hollow side length (D) on flow field and thermal performance is studied.

The results showed that the magnetic field has a negative effect on the thermal performance and the average Nusselt number decreases by increasing the Hartmann number. Because of the high conduction heat transfer coefficient of nanoparticles, the average Nusselt number increases by rising the nanoparticle volume fraction. The effect of adding nanoparticles on heat transfer is more effective at low nanoparticle volume fraction (0 ≤ ϕ ≤ 0.01). It was also found that at Ra = 10⁶, when the hollow side length increases to 3, the flow pattern becomes different due to the small gap. The averaged Nu is an increasing function of D at low Ra and an opposite trend occurs at high Rayleigh number.

For the first time, the effects of magnetic field, Rayleigh number, nanoparticle volume fraction and hollow side length on natural convection heat transfer of hybrid nanofluid (Ag-TiO₂/water) is investigated in a complicated cavity.

This study aims to investigate the NiO nano-reinforced solder joint characteristics of ultra-fine electronic package.

Lead-free Sn-Ag-Cu (SAC) solder paste was mixed with various percentages of NiO nanoparticles to prepare the new form of nano-reinforced solder paste. The solder paste was applied to assemble the ultra-fine capacitor using the reflow soldering process. A focussed ion beam, high resolution transmission electron microscopy system equipped with energy dispersive X-ray spectroscopy (EDS) was used in this study. In addition, X-ray inspection system, field emission scanning electron microscopy coupled with EDS, X-ray photoelectron spectroscopy (XPS) and nanoindenter were used to analyse the solder void, microstructure, hardness and fillet height of the solder joint.

The experimental results revealed that the highest fillet height was obtained with the content of 0.01 Wt.% of nano-reinforced NiO, which fulfilled the reliability requirements of the international IPC standard. However, the presence of the NiO in the lead-free solder paste only slightly influenced the changes of the intermetallic layer with the increment of weighted percentage. Moreover, the simulation method was applied to observe the distribution of NiO nanoparticles in the solder joint.

The findings are expected to provide a profound understanding of nano-reinforced solder joint’s characteristics of the ultra-fine package.

The purpose of this paper is to improve the properties of metal nanoparticles which are easy to agglomerate and hard to disperse evenly, thus limiting the application of metal nanoparticles in grease. A novel technology was proposed for modifying metal oxide to improve the dispersibility of nanoparticles.

SA-TiO2 nanoparticles were synthesized using an in-situ esterification method followed by surface modification with stearic acid. The microstructure of the nanoparticles was characterized by scanning electron microscope, transmission electron microscope and Fourier transform infrared spectroscopy and their thermal stability was evaluated by thermogravimetric analyzer. The tribological properties of the SA-TiO2 nanoparticles as additives in lithium grease were evaluated with a four-ball tester and TE77 reciprocating friction tester. The worn surfaces of the steel balls were investigated by EDS and XPS.

The prepared nanoparticles can be well dispersed in the lithium grease and possess much better tribological properties compared to traditional nanoparticles. The results indicated that the excellent tribological performance of SA-TiO2 was attributed to the chemical reaction film composing of Fe2O3, iron oxide and other organic compounds.

This paper provides a method to prevent the agglomeration of nano-TiO2 by surface modification with stearic acid. And the prepared nanoparticles can effectively improve the tribology performance of lithium grease.

The paper aims to design the optimum formulation of the nano-titanium dioxide (TiO2) hydrophilic coating system using the synthetic polypropylene glycol (PPG), which can create the reflection and absorption property.

TiO2 nanoparticles are used as fillers, and PPG has been blended at the proper ratio of 1PPG: 0.2TiO2. The prepared resin has been applied onto the glass substrate at different numbers of glass immersions during the dip-coating fabrication process. One-time glass immersion is labeled as T1 coating, two-time glass immersion is labeled as T2 coating and three-time glass immersion is labeled as T3 coating. All the prepared coating systems were left dry at ambient temperature.

T3 coating showed the lowest reading of WCA value at 40.50°, due to higher surface energy at 61.73 mN/m. The T3 coating also shows the greatest absorbance property among the prepared coating systems among the prepared coating. In terms of reflectance property, the T2 coating system has great reflectance in UV region and near-infrared region, which is 16.47% and 2.77 and 2.73%, respectively. The T2 coating also has great optical transmission about 75.00% at the visible region.

The development of thermal insulation coating by studying the relationship between convection heat and reflectance at different wavelengths of incident light.

The developed coating shows high potential for glass window application.

The application of the hydrophilic coating on light absorption, reflectance and transmission at different wavelengths.

The purpose of this paper is to invent a new functional coated fabric based on nanomaterials to shield UV and IR. Multifunctional surface coatings with ultraviolet (UV)/near infrared radiations protection and waterproof were widely applied in outdoor fabrics. Herein, ultrafine TiO2 and nano-antimony doped tin dioxide (ATO) were prepared and embedded into water-based polyurethane (PU) coatings and then coated on the nylon fabric.

ATO was prepared using the sol–gel method and the two powders were dispersed by ball milling. The results of zeta potential and particle size distribution showed that the ultrafine TiO2 and nano-ATO could be stably dispersed in water at pH 8 with the presence of sodium polycarboxylate. The optimal process was screened out by orthogonal design and scanning electron microscopy (SEM), UV protection, thermal insulation and water-pressure resistance were tested. SEM images indicated the nanoparticles could be uniformly dispersed in the coatings.

The effect of UV prevention can get to UPF > 50, UVA < 5 per cent, which meet up with the AATCC 183-2014. Coatings can effectively lower the temperature of fabric surface by 8∼9ºC through the self-made closed test system and by 3ºC through the open test system.

These PU coatings are environment-friendly and adhesive to impart waterproof, UV-proof and thermal insulation properties to nylon fabrics by coating finishing.

This study aims to investigate the effect of a small amount of TiO₂ NPs addition on the microstructure, thermal, mechanical and electrical properties of environmentally friendly eutectic (SAC355)_100-x(TiO₂)_x (x = 0.1, 0.3, 0.5, 0.7 and 1 wt.%) solder alloys.

Mechanical, thermal and electrical properties and microstructure conditions are taken into major consideration in any study of materials containing nanoparticles. Dynamic resonance technique, X-ray diffraction and scanning electron microscopy were carried out to study stiffness, identification of the phases and the morphology features of the solder. Structure and microstructure analysis indicated that the presence of rhombohedral β–Sn phase in addition to orthorhombic intermetallic compound (IMC) Ag₃Sn and Cu₃Sn phase dispersed in Sn matrix. In addition, the results showed that TiO₂ NPs addition at a small trace amount into SAC355 system reduces and improves the particle size of both rhombohedral β–Sn and orthorhombic IMC Ag₃Sn and Cu₃Sn. The interstitial dispersion of TiO₂ NPs at grain boundaries resulted in Ag₃Sn being more uniform needle-like, which is distributed in the β–Sn matrix. The fine and uniform microstructure leads to improvement of mechanical strength.

Some important conclusions are summarized as follows: microstructure investigations revealed that the addition of TiO₂ NPs particles to eutectic SAC355 inhibited in reducing and refines the crystallite size as well as the Ag₃Sn IMC, which reinforced the strength of plain solder alloy. The mechanical properties values such as Young’s modulus and Vickers microhardness of SAC355 solder alloy can be significantly improved by adding a trace amount of TiO₂ NPs compared with plain solder because of the existence of appropriate volume fraction of Ag₃Sn IMC. The results show that the best creep resistance is obtained when the addition of 0.3 wt.% of TiO₂ NPs is compared to plain solder. TiO₂ NPs addition could increase the melting temperature, compared with plain solder. All results showed that TiO₂ NPs addition is an effective method to enhance new solder joints.

New solder alloys.

Development of TiO₂ NPs-doped eutectic SAC355 lead-free solder for electronic packaging.

Several graphs, streamlines, isotherms and 3D plots are illustrated to enlighten the noteworthy fallouts of the investigation. Embedding flow factors for velocity, induced magnetic field and temperature have been determined using parametric analysis.

Ternary hybrid nanofluids has outstanding hydrothermal performance compared to classical mono nanofluids and hybrid nanofluids owing to the presence of triple tiny metallic particles. Ternary hybrid nanofluids are considered as most promising candidates in solar energy, heat exchangers, electronics cooling, automotive cooling, nuclear reactors, automobile, aerospace, biomedical devices, food processing etc. In this work, a ternary hybrid nanofluid flow that contains metallic nanoparticles over a wedge under the prevalence of solar radiating heat, induced magnetic field and the shape factor of nanoparticles is considered. A ternary hybrid nanofluid is synthesized by dispersing iron oxide (Fe3O4), silver (Ag) and magnesium oxide (MgO) nanoparticles in a water (H₂O) base fluid. By employing similarity transformations, we can convert the governing equations into ordinary differential equations and then solve numerically by using the Runge–Kutta–Fehlberg approach.

There is no fund for the research work.

This kind of study may be used to improve the performance of solar collectors, solar energy and solar cells.

This investigation unfolds the hydrothermal changes of radiative water-based Fe₃O₄-Ag-MgO-H₂O ternary hybrid nanofluidic transport past a static and moving wedge in the presence of solar radiating heating and induced magnetic fields. The shape factor of nanoparticles has been considered in this study.

The aim of the present study was to gather and review all the important properties of the Sn–Ag–Cu (SAC) solder alloy. The SAC solder alloy has been proposed as the alternative solder to overcome the environmental concern of lead (Pb) solder. Many researchers have studied the SAC solder alloy and found that the properties such as melting temperature, wettability, microstructure and interfacial, together with mechanical properties, are better for the SAC solder than the tin – lead (SnPb) solders. Meanwhile, addition of various elements and nanoparticles seems to produce enhancement on the prior bulk solder alloy as well. These benefits suggest that the SAC solder alloy could be the next alternative solder for the electronic packaging industry. Although many studies have been conducted for this particular solder alloy, a compilation of all these properties regarding the SAC solder alloy is still not available for a review to say.

Soldering is identified as the metallurgical joining method in electronic packaging industry which uses filler metal, or well known as the solder, with a melting point < 425°C (Yoon et al., 2009; Ervina and Marini, 2012). The SAC solder has been developed by many methods and even alloying it with some elements to enhance its properties (Law et al., 2006; Tsao et al., 2010; Wang et al., 2002; Gain et al., 2011). The development toward miniaturization, meanwhile, requires much smaller solder joints and fine-pitch interconnections for microelectronic packaging in electronic devices which demand better solder joint reliability of SAC solder Although many studies have been done based on the SAC solder, a review based on the important characteristics and the fundamental factor involving the SAC solder is still not sufficient. Henceforth, this paper resolves in stating all its important properties based on the SAC solder including its alloying of elements and nanoparticles addition for further understanding.

Various Pb-free solders have been studied and investigated to overcome the health and environmental concern of the SnPb solder. In terms of the melting temperature, the SAC solder seems to possess a high melting temperature of 227°C than the Pb solder SnPb. Here, the melting temperature of this solder falls within the range of the average reflow temperature in the electronic packaging industry and would not really affect the process of connection. A good amendment here is, this melting temperature can actually be reduced by adding some element such as titanium and zinc. The addition of these elements tends to decrease the melting temperature of the SAC solder alloy to about 3°C. Adding nanoparticles, meanwhile, tend to increase the melting temperature slightly; nonetheless, this increment was not seemed to damage other devices due to the very slight increment and no drastic changes in the solidification temperature. Henceforth, this paper reviews all the properties of the Pb-free SAC solder system by how it is developed from overcoming environmental problem to achieving and sustaining as the viable candidate in the electronic packaging industry. The Pb-free SAC solder can be the alternative to all drawbacks that the traditional SnPb solder possesses and also an upcoming new invention for the future needs. Although many studies have been done in this particular solder, not much information is gathered in a review to give better understanding for SAC solder alloy. In that, this paper reviews and gathers the importance of this SAC solder in the electronic packaging industry and provides information for better knowledge.

This paper resolves in stating of all its important properties based on the SAC solder including its alloying of elements and nanoparticles addition for further understanding.