Search results

This study aims to better understand the morphological characteristics of single particle and the health risk characteristics of heavy metals in PM_2.5 in different functional areas of Handan City.

High resolution transmission electron microscopy was used to observe the aerosol samples collected from different functional areas of Handan City. The morphology and size distribution of the particles collected on hazy and clear days were compared. The health risk evaluation model was applied to evaluate the hazardous effects of particles on human health in different functional areas on hazy days.

The results show that the particulate matter in different functional areas is dominated by spherical particles in different weather conditions. In particular, the proportion of spherical particles exceeds 70% on the haze day, and the percentage of soot aggregates increases significantly on the clear day. The percentage of each type of particle in the teaching and living areas varied less under different weather conditions. Except for the industrial area, the size distribution of each type of particle in haze samples is larger than that on the clear day. Spherical particles contribute more to the small particle size segment. Soot aggregate and other shaped particles contribute more to the large size segment. The mass concentrations of hazardous elements (HEs) in PM_2.5 in different functional areas on consecutive haze pollution days were illustrated as industrial area > traffic area > living area > teaching area. Compared with the other functional areas, the teaching area had the lowest noncarcinogenic risk of HEs. The lifetime carcinogenic risk values of Cr and As elements in each functional area have exceeded residents’ threshold levels and are at high risk of carcinogenicity. Among the four functional areas, the industrial area has the highest carcinogenic and noncarcinogenic risks. But the effects of HEs on human health in the other functional areas should also be taken seriously and continuously controlled.

The significance of the study is to further understand the morphological characteristics of single particles and the health risks of heavy metals in different functional areas of Handan City. the authors hope to provide a reference for other coal-burning industrial cities to develop plans to improve air quality and human respiratory health.

Given the COVID-19 Pandemic outbreak and the role of medical textiles for protection, this study aims to identify the leading research foci on using textile materials for personal protection in pandemic situations.

A systematic review and systemic analysis of the literature on the subject were performed using the process knowledge development – constructivist (ProKnow-C) methodology.

A bibliographic portfolio with 16 relevant studies was obtained. This portfolio represents the main focus of this research field, including the main filtration mechanisms, ways of disinfecting N95 respirators and proposed methods to evaluate the filtration efficiency of different materials with potential for mask development.

To the best of the authors’ knowledge, this is the first time the ProKnow-C methodology was used in the textile field. Thus, future studies can benefit from using the Proknow-C for selecting and analyzing relevant textile studies following a systematic approach.

At the beginning of the Corona Virus Disease 2019 (COVID-19) pandemic, a digitalized construction environments surfaced in the heating, ventilation and air conditioning (HVAC) systems in the form of a modern delivery system called demand controlled ventilation (DCV). Demand controlled ventilation has the potential to solve the building ventilation's biggest problem of managing indoor air quality (IAQ) for controlling COVID-19 transmission in indoor environments. However, the improper evaluation and information management of infection prevention on dense crowd activities such as measurement errors and volatile organic compound (VOC) generation failure rates, is fragmented so the aim of this research is to integrate this and explore potentials with machine learning algorithms (MLAs).

The method used is a thorough systematic literature review (SLR) approach. The results of this research consist of a detailed description of the DCV system and digitalized construction process of its IAQ elements.

The discussion revealed that DCV has a potential for being further integrated by perceiving it as a MLAs and hereby enabling the management of IAQ level from the perspective of health risk function mechanism (i.e. VOC and CO₂) for maintaining a comfortable thermal environment and save energy of public and private buildings (PPBs). The appropriate MLA can also be selected in different occupancy patterns for seasonal variations, ventilation behavior, building type and locations, as well as current indoor air pollution control strategies. Furthermore, the conceptual framework showed that MLA application such as algorithm design/Model Predictive Control (MPC) integration can alleviate the high spread limitation of COVID-19 in the indoor environment.

Finally, the research concludes that a large unexploited potential within integration and innovation is recognized in the DCV system and MLAs which can be improved to optimize level of IAQ from the perspective of health throughout the building sector DCV process systems. The requirements of CO₂ based DCV along with VOC concentrations monitoring practice should be taken into consideration through further research and experience with adaption and implementation from the ventilation control initial stage of the DCV process.

Networks linking tourist attractions or organizations are a major focus of tourism research. Despite extensive research on tourism networks, academic research on the spatial structure and formation of wine tourism networks is limited. This study aims to investigate the spatial structure and factors influencing the development of a network among Ningxia wineries, an emerging wine tourism destination in China.

This study uses social network analysis to uncover “what” the spatial structure of wine tourism networks looks like. Sixteen in-depth interviews were conducted among key stakeholders to explain the “why” of such structural characteristics.

The results show that in an emerging wine tourism destination, popular tourist attractions enjoy high centrality and hold key positions in the wine tourism network. Small wineries exhibit high closeness centrality, and only one winery serves as a network broker. According to the stakeholders, the importance of network actors will increase as their economic and political importance increase, while small wineries that lack differentiation in the network may perish.

Local governments can implement the suggested measures for improving network connections, and wineries are advised to find suitable positions to improve the experiences of tourists.

This study pioneers the identification of the distinct structure and factors influencing the network of an emerging wine tourism destination, thus enriching the understanding of the interplay and roles of different actors.

The number of young people using e-cigarettes (commonly referred to as vaping) has grown at an alarming rate, creating the need for urgent action. This paper demonstrates rapid step-by-step iterative application of the Co-create, Build and Engage (CBE) framework to showcase how marketing was applied in response to emerging trends that have negative health and environmental consequences. This paper aims to demonstrate how CBE is applied iteratively, ensuring student feedback leads module development.

In Study 1, a pure seven-step co-design implementation, 19 high school students were invited to co-design a vaping prevention approach that would work for them and other people like them. During the sensitisation phase of co-design, students completed one Blurred Minds Vaping module. Feedback grids were provided, with students identifying likes, dislikes and ideas. This likeability data was used, together with input from technical experts and pedagogical best practice, in a 12-week research and development project that aimed to develop a new online learning module focused on vaping and their environmental impacts for the Blurred Minds Academy. The new module was tested with 20 high school students. Feedback grids were provided once again, allowing a comparison of results.

Examination of feedback grid data demonstrates that the newly developed Vaping and the Environment module was improved. Considerations taken on board in the new module design (e.g. increased variability within the module) overcame criticisms expressed previously (e.g. it was boring and too long). Other criticisms remained evident, albeit at a much lower proportion suggesting the new Vaping and the Environment module, and future Blurred Minds module development, would benefit from iterative CBE application.

Conduit et al. (2022) note that marketing academia has been criticised for having an increasingly less relevant managerial agenda. This paper outlines a rapid step-by-step application of marketing in response to one of society’s most pressing health challenges – vaping. The iterative application of CBE is outlined, demonstrating that the student experience can be enhanced when marketing’s continual improvement mindset is used. This is the first vaping prevention programme that has included substantive information around the negative impacts of vaping on the environment.

Waiting for a bus may represent a period of intense exposure to traffic particles in hot and noisy conditions in the street. To lessen the particle load and tackle heat in bus stops a shelter was equipped with an electrostatic precipitator and a three-step adiabatic cooling system capable of dynamically adjust its operation according to actual conditions. This study evaluates the effectiveness of the Airbitat Oasis Smart Bus Stop, as the shelter was called, to provide clean and cool air.

The particle exposure experienced in this innovative shelter was contrasted with that in a conventional shelter located right next to it. Mass concentrations of fine particles and black carbon, and particle number concentration (as a proxy of ultrafine particles) were simultaneously measured in both shelters. Air temperature, relative humidity and noise level were also measured.

The new shelter did not perform as expected. It only slightly reduced the abundance of fine particles (−6.5%), but not of ultrafine particles and black carbon. Similarly, it reduced air temperature (−1 °C), but increased relative humidity (3%). Its operation did not generate additional noise.

The shelter's poor performance was presumably due to design flaws induced by a lack of knowledge on traffic particles and fluid dynamics in urban environments. This is an example where harnessing technology without understanding the problem to solve does not work.

It is uncommon to come across case studies like this one in which the performance and effectiveness of urban infrastructure can be assessed under real-life service settings.

Exposure to poor indoor air in refurbished buildings is a matter of health concern due to the growing concentrations of various contaminants as a result of building airtightness without amendment of ventilation, or the use of building materials such as glue, paint, thinner and varnishes. Recent studies have been conducted to measure indoor air pollutants and assess the health risks affecting the quality of life, productivity and well-being of human beings. However, limited review studies have been recently conducted to provide an overview of the state of knowledge. This study aims to conduct a scoping review of indoor air quality (IAQ) in the context of refurbished or energy-retrofitted buildings.

A systematic screening process based on the PRISMA protocol was followed to extract relevant articles. Web of Science, Scopus, Google Scholar and PubMed were searched using customised search formulas. Among 276 potentially relevant records, 38 studies were included in the final review covering a period from 2015 to 2022.

Researchers mapped out the measured compounds in the selected studies and found that carbon dioxide (CO₂) (11%) and total volatile organic compounds (11%) were among the most commonly measured contaminants. Two trends of research were found including (1) the impact of ventilative properties on IAQ and (2) the impact of introducing building materials on IAQ.

The contribution of this study lies in summarising evidence on IAQ measurements in refurbished buildings, discussing recent advancements, revealing significant gaps and limitations, identifying the trends of research and drawing conclusions regarding future research directions on the topic.

This research paper aims to examine the influence of greater female participation on the board of directors on the environmental transparency of companies.

To achieve the purpose of this study, the authors analyzed the environmental transparency of 412 companies in the energy sector, headquartered in 19 countries, during a four-year period (2016 to 2019).

The data reveal that gender diversity has a positive effect on the environmental transparency of companies in developed countries and on the total model. Furthermore, after removing the US companies, the results remained the same, indicating that companies with more women on the board tend to have greater environmental transparency. Regarding corporate governance variables, the results show that companies that have a corporate social responsibility committee tend to have greater environmental transparency, both in emerging countries and in developed countries.

The findings indicate that if companies aim to have greater environmental transparency, they must encourage female participation on boards, giving them equal opportunities for professional growth. Organizations must deconstruct the ideology that women are fewer valuable members of their boards, which limits their contribution to organizational success. Additionally, regulators can encourage greater female participation on boards through the implementation of quota laws.

The authors’ evidence indicates that the presence of women on board is an antecedent of greater quality in the dissemination of environmental information. Thus, managers of companies in the energy sector must understand that diversity on the board affects communication with its stakeholders through environmental transparency.

Artificial fruit ripening is hazardous to mankind. In the recent past, artificial fruit ripening is increasing gradually due to its commercial benefits. To discriminate the type of fruit ripening involved at the vendors’ side, there is a great demand for on-sight ethylene detection in a nondestructive manner. Therefore, this study aims to deal with a comparison of various laboratory and portable methods developed so far with high-performance metrics to identify the ethylene detection at fruit ripening site.

This paper focuses on various types of technologies proposed up to date in ethylene detection, fabrication methods and signal conditioning circuits for ethylene detection in parts per million and parts per billion levels. The authors have already developed an infrared (IR) sensor to detect ethylene and also developed a lab-based setup belonging to the electrochemical sensing methods to detect ethylene for the fruit ripening application.

The authors have developed an electrochemical sensor based on multi-walled carbon nanotubes whose performance is relatively higher than the sensors that were previously reported in terms of material, sensitivity and selectivity. For identifying the best sensing technology for optimization of ethylene detection for fruit ripening discrimination process, authors have developed an IR-based ethylene sensor and also semiconducting metal-oxide ethylene sensor which are all compared with literature-based comparable parameters. This review paper mainly focuses on the potential possibilities for developing portable ethylene sensing devices for investigation applications.

The authors have elaborately discussed the new chemical and physical methods of ethylene detection and quantification from their own developed methods and also the key findings of the methods proposed by fellow researchers working on this field. The authors would like to declare that the extensive analysis carried out in this technical survey could be used for developing a cost-effective and high-performance portable ethylene sensing device for fruit ripening and discrimination applications.

This study aims to determine the solutions to address the Indian attitude-behaviour inconsistency in the green purchasing context and provide the possible combinations of antecedents that aid Indian marketers in designing promotional and advertising strategies.

A non-probability criterion-based sampling technique was used in collecting the data across Hyderabad city of Telangana region through online survey technique. The respondents were the customers who were attracted towards green and eco-friendly products. A total of 129 responses were received. SPSS v26 software was used to conduct the descriptive analysis, and the two-step analysis approach of the measurement and structural model was conducted in SmartPLS.

Results indicate that interpersonal influence has a greater direct influence on green purchase behaviour (GPB); altruism’s influence on green purchase intention (GPI) and GPB is through environmental attitude (EA) and green awareness (GA). EA has a significant influence on GA and green behaviour (GB). The GA and GB individually act as potential mediators between EA and green consumption behaviour (GCB) variables. Perceived environmental knowledge (PEK) does not influence GPB directly or indirectly. Altruism still ranks at the fifth position among the six antecedents, indicating reciprocal determinism and not an altruistic purchase approach in the Telangana region.

The results of this study may be used by government agencies and policymakers to launch awareness campaigns aimed at educating the public and encouraging green buying practices among broader societal segments. These kinds of programmes could lessen the harm that inconsiderate consumption habits do to the environment and to society, increase the green behaviour practices like planting trees, and recycling, and also increase the consumer’s PEK.

To the best of the authors’ knowledge, the present study is the first to apply reciprocal deterministic theory along with theory of planned behaviour to predict Indian GCB and address the attitude-behaviour gap. Moreover, to the best of the authors’ knowledge, this is the first study to investigate together the direct and indirect influence of altruism, interpersonal influence and perceived environmental knowledge on green purchase behaviour. Given the growing trend of consumers adopting an eco-friendly mind-set, a novel approach to empirically discuss the behavioural and personal factors will give research the much-needed boost it needs.