Search results

The purpose of this paper is to investigate the influence of turning parameters such as cutting speed, feed rate and depth of cut on tool flank wear and machined surface quality of AISI 304 stainless steel during environment friendly turning under nanofluid minimum quantity lubrication (NMQL) conditions using PVD-coated carbide cutting inserts.

Turning experiments are conducted as per the central composite rotatable design under the response surface methodology. ANOVA and regression analysis are employed to examine significant cutting parameters and develop mathematical models for VB (tool flank wear) and R_a (surface roughness). Multi-response desirability optimization approach is used to investigate optimum turning parameters for simultaneously minimizing VB and R_a.

Optimal input turning parameters are observed as follows: cutting speed: 168.06 m/min., feed rate: 0.06 mm/rev. and depth of cut: 0.25 mm with predicted optimal output response factors: VB: 106.864 µm and R_a: 0.571 µm at the 0.753 desirability level. ANOVA test reveals depth of cut and cutting speed-feed rate interaction as statistically significant factors influencing tool flank wear, whereas cutting speed is a dominating factor affecting surface roughness. Confirmation tests show 5.70 and 3.71 percent error between predicted and experimental examined values of VB and R_a, respectively.

AISI 304 is a highly consumed grade of stainless steel in aerospace components, chemical equipment, nuclear industry, pressure vessels, food processing equipment, paper industry, etc. However, AISI 304 stainless steel is considered as a difficult-to-cut material because of its high strength, rapid work hardening and low heat conductivity. This leads to lesser tool life and poor surface finish. Consequently, the optimization of machining parameters is necessary to minimize tool wear and surface roughness. The results obtained in this research can be used as turning database for the above-mentioned industries for attaining a better machined surface quality and tool performance under environment friendly machining conditions.

Turning of AISI 304 stainless steel under NMQL conditions results in environment friendly machining process by maintaining a dry, healthy, clean and pollution free working area.

Machining of AISI 304 stainless steel under vegetable oil-based NMQL conditions has not been investigated previously.

This work aims to describe the face milling analysis on Inconel X-750 superalloy using coated carbides. The formed chips and tool wear were further analyzed at different cutting parameters. The various impact of cutting parameters on chip morphology was also analyzed. Superalloys, often referred to as heat-resistant alloys, have exceptional tensile, ductile and creep strength at high operating temperatures and good fatigue strength, and often better corrosion and oxidation resistance at extreme heat. Because of these qualities, these alloys account for more than half of the weight of sophisticated aviation, biomedical and thermal power plants today. Inconel X-750 is a high-temperature nickel-based superalloy that is hard to machine because of its extensive properties. At last, the discussion regarding the tool wear mechanism was analyzed and discussed in this article.

The machining parameters for the study are cutting speed, feed rate and depth of cut. One factor at a time approach was implemented to investigate the effect of cutting parameters on the cutting forces, surface roughness and material removal rate. The scatter plot was plotted between cutting parameters and target functions (cutting forces, surface roughness and material removal rate). The six levels of cutting speed, feed rate and depth of cut were taken as cutting parameters.

The cutting forces are primarily affected by the cutting parameters, tool geometry, work material etc. The maximum forces Fx were encountered at 10 mm/min cutting speed, 0.15 mm/rev feed rate and 0.4 mm depth of cut, further maximum forces Fy were attained at 10 mm/min cutting speed, 0.25 mm/rev feed rate and 0.4 mm depth of cut and maximum forces Fz were attained at 50 mm/min cutting speed, 0.05 mm/rev feed rate and 0.4 mm depth of cut. The maximum surface roughness value was observed at 40 mm/min cutting speed, 0.15 mm/rev feed rate and 0.5 mm depth of cut.

The effect of machining parameters on cutting forces, surface roughness, chip morphology and tool wear for milling of Inconel X-750 high-temperature superalloy is being less researched in the present literature. Therefore, this research paper will give a direction for researchers for further studies to be carried out in the domain of high-temperature superalloys. Furthermore, the different tool wear mechanisms at separate experimental trials have been explored to evaluate and validate the process performance by conducting scanning electron microscopy analysis. Chip morphology has also been evaluated and analyzed under the variation of selected process inputs at different levels.

Because many cutting fluids contain hazardous chemical constituents, industries and researchers are looking for alternative methods to reduce the consumption of cutting fluids in machining operations due to growing awareness of ecological and health issues, government strict environmental regulations and economic pressures. Therefore, the purpose of this study is to raise awareness of the minimum quantity lubrication (MQL) technique as a potential substitute for environmental restricted wet (flooded) machining situations.

The methodology adopted for conducting a review in this study includes four sections: establishment of MQL technique and review of MQL machining performance comparison with dry and wet (flooded) environments; analysis of the past literature to examine MQL turning performance under mono nanofluids (M-NF); MQL turning performance evaluation under hybrid nanofluids (H-NF); and MQL milling, drilling and grinding performance assessment under M-NF and H-NF.

From the extensive review, it has been found that MQL results in lower cutting zone temperature, reduction in cutting forces, enhanced tool life and better machined surface quality compared to dry and wet cutting conditions. Also, MQL under H-NF discloses notably improved tribo-performance due to the synergistic effect caused by the physical encapsulation of spherical nanoparticles between the nanosheets of lamellar structured nanoparticles when compared with M-NF. The findings of this study recommend that MQL with nanofluids can replace dry and flood lubrication conditions for superior machining performance.

Machining under the MQL regime provides a dry, clean, healthy and pollution-free working area, thereby resulting the machining of materials green and environmentally friendly.

This paper describes the suitability of MQL for different machining operations using M-NF and H-NF.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2023-0131/