Search results

The purpose of this study is for solving many issues in production that includes processing of complex-shaped profile, machining of high-strength materials, good surface finish with high-level precision and minimization of waste. Among the various advanced machining processes, abrasive jet machining (AJM) is one of the non-traditional machining techniques used for various applications such as polishing, deburring and hole making. Hence, an overview of the investigations done on carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GRFP) composites becomes important.

Discussion on various approaches to AJM, the effect of process parameters on the glass fiber and carbon fiber polymeric composites are presented. Kerf characteristics, surface roughness and various nozzle design were also discussed.

It was observed that abrasive jet pressure, stand-off distance, traverse rate, abrasive size, nozzle diameter, angle of attack are the significant process parameters which affect the machining time, material removal rate, top kerf, bottom kerf and kerf angle. When the particle size is maximum, the increased kinetic energy of the particle improves the penetration depth on the CFRP surface. As the abrasive jet pressure is increased, the cutting process is enabled without severe jet deflection which in turn minimizes the waviness pattern, resulting in a decrease of the surface roughness.

The review is limited to glass fiber and carbon fiber polymeric composites.

In many applications, the use of composite has gained wide acceptance. Hence, machining of the composite need for the study also has gained wide acceptance.

The usage of composites reduces the usage of very costly materials of high density. The cost of the material also comes down.

This paper is a comprehensive review of machining composite with abrasive jet. The paper covers in detail about machining of only GFRP and CFRP composites with various nozzle designs, unlike many studies which has focused widely on general AJM of various materials.

The purpose of the study is to machine the composites at lower machining time with higher accuracy without causing delamination.

Abrasive jet machining is the technology appropriate for machining composite materials to obtain good dimensional accuracy without causing de-lamination. The central composite design was followed in deciding the number of experiments to be carried out.

The influence of abrasive jet machining process parameters on machining time, material removal rate (MRR) and kerf characteristics were investigated. The experimental results proved the newly designed internal threaded nozzle increased MRR, thereby reducing the machining time.

Machining of glass fibre reinforced polymer (GFRP) is one of the challenging tasks given its non-linear and in-homogeneous properties. In this investigation, newly developed threaded and unthreaded nozzles in machining were used for making holes on the GFRP composites.

The goal of this study is to determine the values of the process parameters that should be used during the machining of ceramic tile using the abrasive water jet (AWJ) process in order to achieve the lowest possible values for surface roughness and kerf taper angle.

In the present work, ceramic tile is processed by the AWJ process and experimental data were recorded using the RSM approach based Box–Behnken design matrix. The input process factors were water jet pressure, jet traverse speed, abrasive flow rate and standoff distance, to determine the surface roughness and kerf taper angle. ANOVA was used to check the adequacy of model and significance of process parameters. Further, the elite opposition-based learning grasshopper optimization (EOBL-GOA) algorithm was implemented to identify the simultaneous optimization of multiple responses of surface roughness and kerf taper angle in AWJ.

The suggested EOBL-GOA algorithm is suitable for AWJ of ceramic tile, as evidenced by the error rate of ±2 percent between experimental and predicted solutions. The surfaces were evaluated with an SEM to assess the quality of the surface generated with the optimal settings. As compared with initial setting of the SEM image, it was noticed that the bottom cut surface was nearly smooth, with less cracks, striations and pits in the improved optimal results of the SEM image. The results of the analysis can be used to control machining parameters and increase the accuracy of AWJed components.

The findings of this study present an innovative method for assessing the characteristics of the nontraditional machining processes that are most suited for use in industrial and commercial applications.

This paper aims to develop an electrochemical abrasive jet machining (ECAJM) technology to investigate the surface machining effect of Ti-6Al-4V alloy.

First, the ECAJM equipment was set up, and a series of experiments for the surface machining of Ti-6Al-4V alloy was performed.

The experimental results show that the flowing abrasives of 0.05 Wt.% can effectively remove the TiO₂ oxide film of Ti-6Al-4V alloy surface. In addition, the flowing abrasives produce cutting machining effect on the surface of titanium aluminum alloy, and the oxide film can be removed effectively. For the case of machining pressure of 0.4 Mpa and machining gap of 0.4 mm, the processing efficiency can be achieved up to 20 µm/s.

Under different machining pressure, the flowing abrasive with high kinetic energy impacting the Ti-6Al-4V alloy surface and the oxide film produced from the electrolytic reaction process can be removed effectively, thereby enhancing the efficiency of electrochemical machining process.

The choice of best machining parameters is an extremely basic factor in handling of any machined parts. The purpose of this paper is to exhibit a multi-objective optimization technique; in view of weighted aggregate sum product assessment (WASPAS) technique toward upgrade the machining parameters in modified air abrasive jet machining (MAAJM) process: injecting pressure, stand-off distance (SOD), and abrasive mesh size measure with 100 rpm rotatable worktable on Nickel 233 alloy material. Three conflicting destinations, material removal rate (MRR), surface roughness (SR) and taper angles (Ta), respectively, are considered at the same time. The proposed procedure uses WASPAS, which is the examination of parametric optimization of the abrasive jet machining (AJM) process. The results was used any scopes of reactions in MAAJM process is the ideal setting of parameters are resolved through investigations represented. There is wide utilization of Nickel 233 in aviation enterprises; machining information on producing a hole utilizing MAAJM for the first time is given in this work, which will be helpful different industries.

This paper exhibits a multi-objective optimization technique; in view of WASPAS technique toward upgrade the machining parameters in MAAJM process: injecting pressure, SOD, and abrasive mesh size measure with 100 rpm rotatable worktable on Nickel 233 alloy material.

As an outcome of using the tool in any ranges of responses in the AJM process, the optimal setting of parameters is determined through experiments illustrated. The machining data of generating a hole using AJM are studied for the first time in this work, which will be useful for aerospace industries, where Nickel 233 is used broadly.

A new material in unconventional machining process and also a multi-objective optimization technique are adopted.

The purpose of this paper is to adopt the multi-objective optimization technique for identifying a set of optimum abrasive water jet machining (AWJM) parameters to achieve maximum material removal rate (MRR) and minimum surface roughness.

Data of a few experiments as per the Taguchi’s orthogonal array are considered for achieving maximum MRR and minimum surface roughness (Ra) of the Inconel718. Analysis of variance is performed to understand the statistical significance of AWJM input process parameters.

Empirical relations are developed for MRR and Ra in terms of the AWJM process parameters and demonstrated their adequacy through comparison of test results.

The signal-to-noise ratio transformation should be applied to take in to account the scatter in the repetition of tests in each test run. But, many researchers have adopted this transformation on a single output response of each test run, which has no added advantage other than additional computational task. This paper explains the impact of insignificant process parameter in selection of optimal process parameters. This paper demands drawbacks and complexity in existing theories prior to use new algorithms.

Taguchi approach is quite simple and easy to handle optimization problems, which has no practical implications (if it handles properly). There is no necessity to hunt for new algorithms for obtaining solution for multi-objective optimization AWJM process.

This paper deals with a case study, which demonstrates the simplicity of the Taguchi approach in solving multi-objective optimization problems with a few number of experiments.

The purpose of this study was to optimize the surface roughness (Ra), delamination damage at the hole entrance (FdT) and at the hole exit (FdB) and kerf angle (K) in the drilling of aramid fiber-reinforced polymer (AFRP) composite material using abrasive water jet (AWJ) machining.

The AFRP composite was produced by the vacuum infusion method. The drilling experiments were performed on an AWJ machine using a three-axis computerized numerical control system. Machine processing parameters were determined as water pressure (2,000, 3,000 and 4,000 bar), stand-off distance (2, 4 and 6 mm) and traverse feed rate (150, 250 and 350 mm/min). Optimization of processing parameters in the drilling experiments was carried out according to the Taguchi L27 (33) orthogonal array. In addition, gray relational analysis (GRA) was used to analyze the complex uncertainty affecting the results.

Results of the drilling operations demonstrated that water pressure (P) was the most effective parameter, with 65.3%, 65.2%, 49.8% and 52.1% contribution rates for Ra, FdT, FdB and K, respectively.

Reliable results have been obtained with Taguchi-based GRA while drilling AFRP composite material using AWJ. Significant results have been achieved to increase the hole quality in the drilling of AFRP composite material.

The new approach is to present more detailed analysis by using Taguchi method and multi-decision Taguchi-based gray relation analysis in AFRP composite material drilling using AWJ. Thus, time and experiment costs are saved.

Now available from LVD is the Aquarius range of water jet cutting machines which have been developed for the European market following the signing of a co‐operation agreement between ASI Robotic Systems of America and LVD.

Additive manufacturing (AM) offers potential solutions when conventional manufacturing reaches its technological limits. These include a high degree of design freedom, lightweight design, functional integration and rapid prototyping. In this paper, the authors show how AM can be implemented not only for prototyping but also production using different optimization approaches in design including topology optimization, support optimization and selection of part orientation and part consolidation. This paper aims to present how AM can reduce the production cost of complex components such as jet engine air manifold by optimizing the design. This case study also identifies a detailed feasibility analysis of the cost model for an air manifold of an Airbus jet engine using various strategies, such as computer numerical control machining, printing with standard support structures and support optimization.

Parameters that affect the production price of the air manifold such as machining, printing (process), feedstock, labor and post-processing costs were calculated and compared to find the best manufacturing strategy.

Results showed that AM can solve a range of problems and improve production by customization, rapid prototyping and geometrical freedom. This case study showed that 49%–58% of the cost is related to pre- and post-processing when using laser-based powder bed fusion to produce the air manifold. However, the cost of pre- and post-processing when using machining is 32%–35% of the total production costs. The results of this research can assist successful enterprises, such as aerospace, automotive and medical, in successfully turning toward AM technology.

Important factors such as validity, feasibility and limitations, pre-processing and monitoring, are discussed to show how a process chain can be controlled and run efficiently. Reproducibility of the process chain is debated to ensure the quality of mass production lines. Post-processing and qualification of the AM parts are also discussed to show how to satisfy the demands on standards (for surface quality and dimensional accuracy), safety, quality and certification. The original contribution of this paper is identifying the main production costs of complex components using both conventional and AM.