Search results

This study aims to offer a hybrid stand-alone system for electric vehicle (EV) charging stations (CS), an emerging power scheme due to the availability of renewable and environment-friendly energy sources. This paper presents the analysis of a photovoltaic (PV) with an adaptive neuro-fuzzy inference system (ANFIS) algorithm, solid oxide fuel cell (SOFC) and a battery storage scheme incorporated for EV CS in a stand-alone mode. In previous studies, either the hydrogen fuel of SOFC or the irradiance is controlled using artificial neural network. These parameters are not controlled simultaneously using an ANFIS-based approach. The ANFIS-based stand-alone hybrid system controlling both the fuel flow of SOFC and the irradiance of PV is discussed in this paper.

The ANFIS algorithm provides an efficient estimation of maximum power (MP) to the nonlinear voltage–current characteristics of a PV, integrated with a direct current–direct current (DC–DC) converter to boost output voltage up to 400 V. The issue of fuel starvation in SOFC due to load transients is also mitigated using an ANFIS-based fuel flow regulator, which robustly provides fuel, i.e. hydrogen per necessity. Furthermore, to ensure uninterrupted power to the CS, PV is integrated with a SOFC array, and a battery storage bank is used as a backup in the current scenario. A power management system efficiently shares power among the aforesaid sources.

A comprehensive simulation test bed for a stand-alone power system (PV cells and SOFC) is developed in MATLAB/Simulink. The adaptability and robustness of the proposed control paradigm are investigated through simulation results in a stand-alone hybrid power system test bed.

The simulation results confirm the effectiveness of the ANFIS algorithm in a stand-alone hybrid power system scheme.

This study aims to explore and ranks the factors that might determine attitudes and intentions toward using autonomous vehicles (AVs).

The “technology acceptance model” (TAM) was extended by assessing the moderating influences of personal-related factors. Data were collected from 378 Vietnamese and analysed using a combination of “partial least squares” and the “adaptive neuro-fuzzy inference system” (ANFIS) technique.

The findings demonstrated the power of TAM in explaining the attitude and intention to use AVs. ANFIS enables ranking the importance of determinants and predicting the outcomes. Perceived ease of use and attitude were the most crucial drivers of attitude and intention to use AVs, respectively. Personal innovativeness negatively moderates the influence of perceived ease of use on attitude. Data privacy concerns moderate positively the impact of perceived usefulness on attitude. The moderating effect of price sensitivity was not supported.

These findings provide insights for policymakers and automobile companies' managers, designers and marketers on driving factors in making decisions to adopt AVs.

The study extends the AVs literature by illustrating the importance of personal-related factors, ranking the determinants of attitude and intention, illustrating the inter-relationships among AVs adoption factors and predicting individuals' attitudes and behaviours towards using AVs.

The purpose of the study is to establish a predictive model for sustainable wire electrical discharge machining (WEDM) by using adaptive neuro fuzzy interface system (ANFIS). Machining was done on Titanium grade 2 alloy, which is also nicknamed as workhorse of commercially pure titanium industry. ANFIS, being a state-of-the-art technology, is a highly sophisticated and reliable technique used for the prediction and decision-making.

Keeping in the mind the complex nature of WEDM along with the goal of sustainable manufacturing process, ANFIS was chosen to construct predictive models for the material removal rate (MRR) and power consumption (Pc), which reflect environmental and economic aspects. The machining parameters chosen for the machining process are pulse on-time, wire feed, wire tension, servo voltage, servo feed and peak current.

The ANFIS predicted values were verified experimentally, which gave a root mean squared error (RMSE) of 0.329 for MRR and 0.805 for Pc. The significantly low RMSE verifies the accuracy of the process.

ANFIS has been there for quite a time, but it has not been used yet for its possible application in the field of sustainable WEDM of titanium grade-2 alloy with emphasis on MRR and Pc. The novelty of the work is that a predictive model for sustainable machining of titanium grade-2 alloy has been successfully developed using ANFIS, thereby showing the reliability of this technique for the development of predictive models and decision-making for sustainable manufacturing.

Despite the importance of demand forecasting in retail industry, its influence on supply chain agility has not been sufficiently examined. From a total information technology (IT) capability perspective, the purpose of this paper is to examine the antecedent of supply chain agility through retail demand forecasting.

Combining the literature reviews, the quantitative method of algorithm analysis was targeted at, and the firm data were processed on MATLAB.

This paper summarizes IT dimensions of demand forecasting in retail industry and distinguishes the relationship of supply chain agility and demand forecasting from an IT capability view.

Managers can derive a better understanding and measurement of operating activities that appropriately balance among supply chain agility, IT capability and demand forecast practice. Demand forecasting should be integrated into the firm operations to determine the agility level of supply chain in marketplace.

This paper constructs new theoretical grounds for research into the relationship of demand forecasting-supply chain agility and provides an empirical assessment of the essential components for the means to prioritize IT-supply chain.

This study aims to investigate the dynamic influences of clustered barriers that hinder electronic procurement technology (EPT) implementation in construction procurement, using the neuro-fuzzy system.

A comprehensive literature review was conducted and 21 barriers to EPT implementation within construction projects were identified. Based on an expert survey, 121 datasets were gathered for this study. Using mean and normalization analysis for the datasets, 15 out of the 21 barriers were deemed to have critical influences in EPT barriers phenomenon. Subsequently, the critical barriers were classified into five groups: human-related; technological risk-related; government-related; industry growth-related; and financial-related. The relationships and influence patterns between the groups of barriers to EPT implementation were analyzed using the neuro-fuzzy system. Furthermore, sensitivity analysis was performed to examine the dynamic influence levels of the barriers within the hindrance level composition.

The results reveal that addressing one barrier group does not reduce the high levels of hindrances experienced in EPT implementation. However, addressing at least two barrier groups mostly tends to reduce the hindrance levels for EPT implementation. Further, this study revealed that addressing some barrier group pairings, such as technological risk-related and government-related barriers, while other barrier groups remained at a high level, still resulted in high levels of hindrances to EPT implementation in construction procurement.

This study provides insights for researchers to help them contribute to the development of theory with contemporary approaches based on the influence patterns of barrier interrelationships.

This study provides a model that would help practitioners and decision makers in construction procurement to understand and effectively determine the complex and dynamic influences of barrier groups to EPT uptake, for the development of suitable mitigation strategies.

This study provides novel insights into the complex influence patterns among grouped barriers concerning EPT adoption in the construction industry. Researchers and practitioners are equipped with knowledge on the influence patterns of barriers. This knowledge aids the development of effective strategies that mitigate the combined groups of barriers, and promote the wider implementation of EPT in the construction industry.

This paper aims to enable the analysts of reliability and safety system to assess the criticality and prioritize failure modes perfectly to prefer actions for controlling the risks of undesirable scenarios.

To resolve the challenge of uncertainty and ambiguous related to the parameters, frequency, non-detection and severity considered in the traditional approach failure mode effect and criticality analysis (FMECA) for risk evaluation, the authors used fuzzy logic where these parameters are shown as members of a fuzzy set, which fuzzified by using appropriate membership functions. The adaptive neuro-fuzzy inference system process is suggested as a dynamic, intelligently chosen model to ameliorate and validate the results obtained by the fuzzy inference system and effectively predict the criticality evaluation of failure modes. A new hybrid model is proposed that combines the grey relational approach and fuzzy analytic hierarchy process to improve the exploitation of the FMECA conventional method.

This research project aims to reflect the real case study of the gas turbine system. Using this analysis allows evaluating the criticality effectively and provides an alternate prioritizing to that obtained by the conventional method. The obtained results show that the integration of two multi-criteria decision methods and incorporating their results enable to instill confidence in decision-makers regarding the criticality prioritizations of failure modes and the shortcoming concerning the lack of established rules of inference system which necessitate a lot of experience and shows the weightage or importance to the three parameters severity, detection and frequency, which are considered to have equal importance in the traditional method.

This paper is providing encouraging results regarding the risk evaluation and prioritizing failures mode and decision-makers guidance to refine the relevance of decision-making to reduce the probability of occurrence and the severity of the undesirable scenarios with handling different forms of ambiguity, uncertainty and divergent judgments of experts.

This study aims to understand the current production scenario emphasizing the significance of green manufacturing in achieving economic and environmental sustainability goals to fulfil future needs; to determine the viability of particular strategies and actions performed to increase the process efficiency of electrical discharge machining; and to uphold the values of sustainability in the nonconventional manufacturing sector and to identify future works in this regard.

A thorough analysis of numerous experimental studies and findings is conducted. This prominent nontraditional machining process’s potential machinability and sustainability challenges are discussed, along with the current research to alleviate them. The focus is placed on modifications to the dielectric fluid, choosing affordable substitutes and treating consumable tool electrodes.

Trans-esterified vegetable oils, which are biodegradable and can be used as a substitute for conventional dielectric fluids, provide pollution-free machining with enhanced surface finish and material removal rates. Modifying the dielectric fluid with specific nanomaterials could increase the machining rate and demonstrate a decrease in machining flaws such as micropores, globules and microcracks. Tool electrodes subjected to cryogenic treatment have shown reduced tool metal consumption and downtime for the setup.

The findings suggested eco-friendly machining techniques and optimized control settings that reduce energy consumption, lowering operating expenses and carbon footprints. Using eco-friendly dielectrics, including vegetable oils or biodegradable dielectric fluids, might lessen the adverse effects of the electrical discharge machine operations on the environment. Adopting sustainable practices might enhance a business’s reputation with the public, shareholders and clients because sustainability is becoming increasingly significant across various industries.

A detailed general review of green nontraditional electrical discharge machining process is provided, from high-quality indexed journals. The findings and results contemplated in this review paper can lead the research community to collectively apply it in sustainable techniques to enhance machinability and reduce environmental effects.

With the help of basic physics, the application of computer algorithms in the form of recent advances such as machine learning and neural networking in textile Industry has been discussed in this review. Scientists have linked the underlying structural or chemical science of textile materials and discovered several strategies for completing some of the most time-consuming tasks with ease and precision. Since the 1980s, computer algorithms and machine learning have been used to aid the majority of the textile testing process. With the rise in demand for automation, deep learning, and neural networks, these two now handle the majority of testing and quality control operations in the form of image processing.

The state-of-the-art of artificial intelligence (AI) applications in the textile sector is reviewed in this paper. Based on several research problems and AI-based methods, the current literature is evaluated. The research issues are categorized into three categories based on the operation processes of the textile industry, including yarn manufacturing, fabric manufacture and coloration.

AI-assisted automation has improved not only machine efficiency but also overall industry operations. AI's fundamental concepts have been examined for real-world challenges. Several scientists conducted the majority of the case studies, and they confirmed that image analysis, backpropagation and neural networking may be specifically used as testing techniques in textile material testing. AI can be used to automate processes in various circumstances.

This research conducts a thorough analysis of artificial neural network applications in the textile sector.

This paper aims to present the development of a holistic campus facility management (CFM) performance assessment framework that incorporates a fuzzy logic approach and integrates a comprehensive set of key factors for successful management of campus facilities. The devised framework aims to cater to the needs of campus facilities management firms and departments for the purpose of gauging and assessing their performance across different management domains. Through this approach, facility management organizations can detect potential areas of enhancement and adopt preemptive steps to evade issues, foster progress and ensure success.

After a comprehensive analysis of the literature, conducting in-depth interviews with industry experts and employing the Delphi technique in two rounds, a total of 45 indicators critical to CFM success were identified and subsequently sorted into seven distinct groups. Through an online questionnaire, 402 subject-matter experts proficiently assessed the significance of the critical success indicators and their groups. A fuzzy logic framework was developed to evaluate and quantify a firm's compliance with the critical success indicators and groups of indicators. The framework was subsequently weighted using computations of the relative importance index (RII) based on the responses received from the questionnaire participants. The initial section of the framework involved a comprehensive analysis of the firm's performance vis-à-vis the indicators, while the latter part sought to evaluate the impact of the indicators groups on the overall firm's performance.

The utilization of fuzzy logic has uncovered the significant effects each effective CFM key indicator on indicators groups, as well as the distinct effects of each CFM indicators group on the overall performance of CFM. The results reveal that financial management, communications management, sustainability and environment management and workforce management are the most impactful indicators groups on the CFM performance. This suggests that it is imperative for management to allocate increased attention to these specific areas.

This study contributes to the advancement of current knowledge by revealing vital indicators of effective CFM and utilizing them to construct a thorough fuzzy logic framework that can assist in evaluating the effectiveness of CFM firms worldwide. This has the potential to provide crucial assistance to facility management organizations, facility managers and policymakers in their quest for informed decision-making.

Public debt forecasts represent a key policy issue. Many methodologies have been employed to predict debt sustainability, including dynamic stochastic general equilibrium models, the stock flow consistent method, the structural vector autoregressive model and, more recently, the neuro-fuzzy method. Despite their widespread application in the empirical literature, all of these approaches exhibit shortcomings that limit their utility. The present research adopts a different approach to public debt forecasts, that is, the random forest, an ensemble of machine learning.

Using quarterly observations over the period 2000–2021, the present research tests the reliability of the random forest technique for forecasting the Italian public debt.

The results show the large predictive power of this method to forecast debt-to-GDP fluctuations, with no need to model the underlying structure of the economy.

Compared to other methodologies, the random forest method has a predictive capacity that is granted by the algorithm itself. The use of repeated learning, training and validation stages provides well-defined parameters that are not conditional to strong theoretical restrictions This allows to overcome the shortcomings arising from the traditional techniques which are generally adopted in the empirical literature to forecast public debt.