Search results

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of this paper is to further optimize the line spacing to improve the performance of meanders for sensor application.

The model of GMI effect of microribbon with meander type is established. The effect of line spacing (Ls) on GMI behavior in meanders is analyzed systematically.

Comparison of theory and experiment indicates that decreasing the line spacing increases the negative mutual inductance and a consequent increase in the GMI effect. The maximum value of the GMI ratio increases from 69% to 91.8% (simulation results) and 16.9% to 51.4% (experimental results) when the line spacing is reduced from 400 to 50 µm. The contribution of line spacing versus line width to the GMI ratio of microribbon with meander type was contrasted. This behavior of the GMI ratio is dominated by the overall negative contribution of the mutual inductance.

This paper explores the effect of line spacing on the GMI ratio of meander type by comparing the simulation results with the experimental results. The superior line spacing is found in the identical sensing area. The findings will contribute to the design of high-performance micropatterned ribbon with meander-type GMI sensors and the establishment of a ribbon-based magnetic-sensitive biosensing system.

The purpose of this paper is to develop a prototype of a wearable medical device in the form of a bandage with a real-time data monitoring platform, which can be used domestically for diabetic patients to identify the possibility of foot ulceration at the early stage.

The prototype can measure blood volumetric change and temperature variation in the forefoot area simultaneously. The waveform extracted using a pulsatile-blood-flow signal was used to assess blood perfusion-related information, and hence, predict ischemic ulcers. The temperature difference between ulcerated and the reference was used to predict neuropathic ulcers. The medical device can be used as a bandage during the application wherein the sensory module is placed inside the hollow pocket of the bandage. A platform was developed through a mobile application where doctors can extract real-time information, and hence, determine the possibility of ulceration.

The height of the peaks in the pulsatile-blood-flow signal measured from the subject with foot ischemic ulcers is significantly less than that of the subject without ischemic ulcers. In the presence of ischemic ulcers, the captured waveform flattens. Therefore, the blood perfusion from arteries to the tissue of the forefoot is considerably low for the subject with ischemic ulcers. According to the temperature difference data measured over 25 consecutive days, the temperature difference of the subject with neuropathic ulcers occasionally exceeded the 4 °F range but mostly had higher values closer to the 4 °F range. However, the temperature difference of the subject who had no complications of neuropathic ulcers did not exceed the 4 °F range, and the majority of the measurements occupy a narrow range from −2°F to 2 °F.

The proposed prototype of wearable medical apparatus can monitor both temperature variation and pulsatile-blood-flow signal on the forefoot simultaneously and thereby predict both ischemic and neuropathic diabetes using a single device. Most importantly, the wearable medical device can be used domestically without clinical assistance with a real-time data monitoring platform to predict the possibility of ulceration and the course of action thereof.

To develop electrode materials for supercapacitor with superior electrochemical performance and simple preparation process, the purpose of this study is to prepare flexible CC/NiS/a-NiS electrodes with self-supporting structure by loading hydrothermally synthesized a-NiS particles along with nano-NiS on carbon cloth by electroplating method.

The effects of current densities, temperatures and pH values on the loading amount and uniformity of the active substances during the plating process were investigated on the basis of optimization of surface morphology, crystalline structure and electrochemical evaluation as the cyclic voltammetry curves, constant current charge–discharge curves and AC impedance.

The a-NiS particles on CC/NiS/a-NiS were mostly covered by the plated nano-NiS, which behaved as a bulge and provided a larger specific surface area. The CC/NiS/a-NiS electrode prepared with the optimized parameter exhibited a specific capacitance of 115.13 F/g at a current density of 1 A/g and a Coulomb efficiency of 84% at 5 A/g, which is superior to that of CC/NiS electrode prepared by electroplating at a current density of 10 mA/cm², a temperature of 55°C and a pH of 4, demonstrating its fast charge response of the electrode and potential application in wearable electronics.

This study provides an integrated solution for the development of specifically structured NiS-based electrode for supercapacitor with simple process, low cost and high electrochemical charge/discharge performance, and the simple and easy-to-use method is also applicable to other electrochemically active composites.

This study aims to investigate organizational learning, represented by the absorptive capacity, as a condition for the firm to learn about marketing data and make more informed decisions. The authors also aimed to understand how the behavior of micro, small and medium enterprises (MSME) businesses differ in this scenario through a multilevel perspective.

Placing absorptive capacity as a mediator of the relationship between business analytics and rational marketing decisions, the authors analyzed data from 224 Brazilian retail companies using structural equation modeling estimated with partial least squares. To test the cross-level moderation effect, the authors also performed a multilevel analysis in RStudio.

The authors found a partial mediation of the absorptive capacity in the relation between business analytics and rational marketing decisions. The authors also discovered that, in the MSMEs firms’ group, even if smaller companies find it more difficult to use data, those that do may reap more benefits than larger ones. This is due to the influence of size in how firms handle information.

The sample size, despite having shown to be consistent and valid, is considered small for a multilevel study. This suggests that our multilevel results should be viewed as suggestive, rather than conclusive, and subjected to further validation.

Rather than solely positioning business analytics as a tool for decision support, the authors’ analysis highlights the importance for firms to develop the absorptive capacity to enable ongoing acquisition, exploration and management of knowledge.

MSMEs are of economic and social importance to most countries, especially developing ones. This research aimed to improve understanding of how this group of firms could transform knowledge into better decisions. The authors also highlight micro and small firms’ difficulties with the use of marketing data so that they can have more effective practices.

The research contributes to the understanding of organizational mechanisms to absorb and learn from the vast amount of current marketing information. Recognizing the relevance of MSMEs, a preliminary multilevel analysis was also conducted to comprehend differences within this group.

This study intends to investigate how an employee's proactive personality and a supervisor's idiosyncratic deals (i-deals) relate to their subordinates' affective commitment (AC) and occupational well-being (OWB), in light of the mediating role of subordinates' i-deals, using proactive motivation theory and the job demand–resource (JD-R) model as theoretical foundations.

The study consisted of 342 employees working in the hospitality industry. To examine the proposed model, the researchers used the structural equation modelling approach and bootstrapping method in AMOS.

The results affirmed the influence of subordinates' proactiveness on AC and OWB, but no direct influence of supervisors' prior i-deals on subordinates' AC and OWB was established. When investigating the mediational role of subordinates' i-deals, a partial mediation effect was found between subordinates' proactive personality with AC and OWB, whereas full mediation was established between supervisors' i-deals and subordinates' AC and OWB.

These findings shed light on how i-deals improve AC and OWB for both groups of supervisors and subordinates. In an era of increasing competition amongst organizations operating within the hospitality industry, i-deals serve as a human resource strategy to recruit, develop and retain talented individuals.

The novelty of this research lies in its specific investigation of the combined influence of proactive personality as an individual factor and supervisors' i-deals as an organizational factor on subordinates' i-deals within the context of the hospitality industry. Furthermore, it aims to analyse the potential impact of these factors on AC and OWB.

The paper aims to examine the effect of justice perceptions of performance appraisal (JPPA) practices (i.e. distributive, procedural, informational and interpersonal justice) on organizational citizenship behavior (OCB) and affective commitment (AC) and the effect of AC on OCB. Further, it investigates the mediating role of AC in the relationship between JPPA practices and OCB. Moreover, this study examines the moderating effect of job level on the relationship between JPPA practices and OCB.

The data were collected using a self-reported structured questionnaire. A total of 650 questionnaires were distributed among the employees of 50 information technology (IT) companies in India, and 503 samples were obtained. The conceptual framework was tested using the partial least squares structural equation modeling (PLS-SEM) method, and the moderating effect was tested using process macro.

The findings of this study reveal that the JPPA practices positively affect OCB and AC and AC affects OCB. Further, AC partially mediates this relationship between JPPA practices and OCB. Furthermore, the direct effect of JPPA practices on OCB happens to be strengthened when the job level decreases, thus confirming the moderating role of job level.

The findings of this study augment the social exchange theory (SET) by suggesting that individuals perceiving justice or fairness in performance appraisal practices are likely to have a greater AC that ultimately engages employees in OCB.

This study will be helpful for human resource practitioners in IT companies who are responsible for the fairness of performance appraisal practices and expect their employees to be emotionally attached to the organization and engaged in OCB.

The study adds to the body of knowledge of how justice in performance appraisal practices links to OCB through AC and moderates by job level in an emerging economy in Asia.

This paper aims to introduce an alternative for modeling levitation forces between NdFeB magnets and bulks of high-temperature superconductors (HTS). The presented approach should be evaluated through two different formulations and compared with experimental results.

The T-A and H-ϕ formulations are among the most efficient approaches for modeling superconducting materials. COMSOL Multiphysics was used to apply them to magnetic levitation models and predict the forces involved.The permanent magnet movement is modeled by combining moving meshes and magnetic field identity pairs in both 2D and 3D studies.

It is shown that it is possible to use the homogenization technique for the T-A formulation in 3D models combined with mixed formulation boundaries and moving meshes to simulate the whole device’s geometry.

The case studies are limited to the formulations’ implementation and a brief assessment regarding degrees of freedom. The intent is to make the simulation straightforward rather than establish a benchmark.

The H-ϕ formulation considers the HTS bulk domain as isotropic, whereas the T-A formulation homogenization approach treats it as anisotropic. The originality of the paper lies in contrasting these different modeling approaches while incorporating the external magnetic field movement by means of the Lagrangian–Eulerian method.

Small- and medium-sized enterprises (SMEs) within the construction sector are highly vulnerable to disruptions caused by political and economic decisions or even pandemics. This study evaluated the current operations of selected SMEs providing engineering design and consultancy services against Toyota Production System (TPS) lean tool. The purpose is to juxtapose SME operations and processes with TPS to ascertain the level of their operations conformity to the established TPS lean thinking tool.

This study used a qualitative data collection and analysis approach to evaluate the current processes of participating SMEs against Liker's 14 management principles of TPS. The data collected were analysed using thematic analysis to identify patterns and themes that emerged from the qualitative data.

The analysis revealed that focus on short-term goals, immediate profit and duplication of effort resulting from insufficient collaboration is currently creating waste in participating SMEs' operations. Hence, the implementation of TPS was recommended as a lean tool and a framework based on TPS lean tool was developed for improving the operations of SMEs.

The study is limited to SMEs operating only as consultants providing project planning design within the construction industry. Data collection is limited to qualitative even though observations would improve the outcome of the study.

The study advances contemporary issues in promoting lean implementation in construction sector and developed an improved framework based on the TPS to enhance the performance of SME construction businesses.

This study proposes that the relationship between the employee's moral identity and unethical behavior might sometimes differ from linearly negative, given certain contextual variations, such as unethical pro-organizational behavior (UPB). The pro-organizational motivation of UPB may appeal to individuals' morality to perform unethical behavior for their organization. Herein, using the social identity perspective, the present study hypothesizes a curvilinear relationship between moral identity and UPB with the moderation of organizational identification.

Data collected in two field studies, from 316 and 185 executives in Study 1 and 2, was analyzed using hierarchical regression analysis.

The results affirmed an inverted U-shaped relationship between moral identity and UPB. Further, organizational identification moderated the relationship such that an increase in organizational identification augmented the UPB tendency for low moral identity individuals while inhibiting the UPB tendency for high moral identity individuals.

The current study uniquely demonstrates how moral identity might promote unethical behavior in pro-organizational contexts. Further, this research shows how high moral identity might mitigate the negative outcomes of high organizational identification.

Allocation of the marketing budget has become increasingly challenging due to the diverse channel exposure to customers. This study aims to enhance global marketing knowledge by introducing an ensemble attribution model to optimize marketing budget allocation for online marketing channels. As empirical research, this study demonstrates the supremacy of the ensemble model over standalone models.

The transactional data set for car insurance from an Indian insurance aggregator is used in this empirical study. The data set contains information from more than three million platform visitors. A robust ensemble model is created by combining results from two probabilistic models, namely, the Markov chain model and the Shapley value. These results are compared and validated with heuristic models. Also, the performances of online marketing channels and attribution models are evaluated based on the devices used (i.e. desktop vs mobile).

Channel importance charts for desktop and mobile devices are analyzed to understand the top contributing online marketing channels. Customer relationship management-emailers and Google cost per click a paid advertising is identified as the top two marketing channels for desktop and mobile channels. The research reveals that ensemble model accuracy is better than the standalone model, that is, the Markov chain model and the Shapley value.

To the best of the authors’ knowledge, the current research is the first of its kind to introduce ensemble modeling for solving attribution problems in online marketing. A comparison with heuristic models using different devices (desktop and mobile) offers insights into the results with heuristic models.