Search results

This study aims to present an experimental approach to develop a high-strength 3D-printed recycled polymer composite reinforced with continuous metal fiber.

The continuous metal fiber composite was 3D printed using recycled and virgin acrylonitrile butadiene styrene-blended filament (RABS-B) in the ratio of 60:40 and postused continuous brass wire (CBW). The 3D printing was done using an in-nozzle impregnation technique using an FFF printer installed with a self-modified nozzle. The tensile and single-edge notch bend (SENB) test samples are fabricated to evaluate the tensile and fracture toughness properties compared with VABS and RABS-B samples.

The tensile and SENB tests revealed that RABS-B/CBW composite 3D printed with 0.7 mm layer spacing exhibited a notable improvement in Young’s modulus, ultimate tensile strength, elongation at maximum load and fracture toughness by 51.47%, 18.67% and 107.3% and 22.75% compared to VABS, respectively.

This novel approach of integrating CBW with recycled thermoplastic represents a significant leap forward in material science, delivering superior strength and unlocking the potential for advanced, sustainable composites in demanding engineering fields.

Limited research has been conducted on the in-nozzle impregnation technique for 3D printing metal fiber-reinforced recycled thermoplastic composites. Adopting this method holds the potential to create durable and high-strength sustainable composites suitable for engineering applications, thereby diminishing dependence on virgin materials.

Polymer laser powder bed fusion (PBF-LB/P) is an additive manufacturing technology that is sustainable due to the possibility of recycling the powder multiple times and allowing the fabrication of gears without the aid of support structures and subsequent assembly. However, there are constraints in the process that negatively affect its adoption compared to other additive technologies such as material extrusion to produce gears. This study aims to demonstrate that it is possible to overcome the problems due to the physics of the process to produce accurate mechanism.

Technological aspects such as orientation, wheel-shaft thicknesses and degree of powder recycling were examined. Furthermore, the evolving tooth profile was considered as a design parameter to provide a manufacturability map of gear-based mechanisms.

Results show that there are some differences in the functioning of the gear depending on the type of powder used, 100% virgin or 50% virgin and 50% recycled for five cycles. The application of a groove on a gear produced with 100% virgin powder allows the mechanism to be easily unlocked regardless of the orientation and wheel-shaft thicknesses. The application of a specific evolutionary profile independent of the diameter of the reference circle on vertically oriented gears guarantees rotation continuity while preserving the functionality of the assembled mechanism.

In the literature, there are various studies on material aging and reuse in the PBF-LB/P process, mainly focused on the powder deterioration mechanism, powder fluidity, microstructure and mechanical properties of the parts and process parameters. This study, instead, was focused on the functioning of gears, which represent one of the applications in which this technology can have great success, by analyzing the two main effects that can compromise it: recycled powder and vertical orientation during construction.

Recently emerged Packaging-as-a-Service (PaaS) systems adopt aspects of access-based services and triadic frameworks, which have typically been treated as conceptually separate. The purpose of this paper is to investigate the implications of blending the two in what we call “access-based triadic systems,” by empirically evaluating intentions to adopt PaaS systems for takeaway food among restaurants and consumers.

We derived relevant attributes of PaaS systems from a qualitative pre-study with restaurants and consumers. Next, we conducted two factorial survey experiments with restaurants (N = 176) and consumers (N = 245) in Germany to quantitatively test the effects of those system attributes on their adoption intentions.

This paper highlights that the role of access-based triadic system providers as both the owners of shared assets and the operators of a triadic system is associated with a novel set of challenges and opportunities: System providers need to attract a critical mass of business and end customers while balancing asset protection and system complexity. At the same time, asset ownership introduces opportunities for improved quality control and differentiation from competition.

Conceptually, this paper extends research on access-based services and triadic frameworks by describing an unexplored hybrid form of non-ownership consumption we call “access-based triadic systems.” Empirically, this paper addresses the need to account for the demands of two distinct target groups in triadic systems and demonstrates how factorial survey experiments can be leveraged in this field.

This paper aims to explore the intellectual structure shaping the circular economy (CE) discourse within the built environment in Africa.

The study adopted a bibliometric analysis approach to explore the intellectual structure of CE in the built environment in Africa. The authors collected 31 papers published between 2005 and 2021 from the Scopus database and used VOSviewer for data analysis.

The findings show that there are six clusters shaping the intellectual structure: demolition, material recovery and reuse; waste as a resource; cellulose and agro-based materials; resilience and low-carbon footprint; recycling materials; and the fourth industrial revolution. The two most cited scholars had three publications each, while the top journal was Resources, Conservation and Recycling. The dominant concepts included CE, sustainability, alternative materials, waste management, lifecycle, demolition and climate change. The study concludes that there is low CE research output in Africa, which implies that the concept is either novel or facing resistance.

The data were drawn from one database, Scopus; hence, adoption of alternative databases such as Web of Science, Google Scholar and Dimensions could potentially have yielded a higher number of articles for analysis which potentially would result in different conclusions on the subject understudy.

This study made a significant contribution by articulating the CE intellectual structure in the built environment, identified prominent scholars and academic platforms responsible for promoting circularity in Africa.

Current evidence indicates that humans and animals are at increased risk of multiple health challenges due to microplastic (MP) profusion. However, mitigation is constrained by inadequate scientific data, further aggravated by the lack of evidence in many African countries. This review therefore synthesized evidence on the current extent of MP pollution in Africa and the analytical techniques for reporting.

A literature search was undertaken in research databases. Medical subject headings (MeSH) terms and keywords were used in the literature search. The authors found 38 studies from 10 countries that met the inclusion criteria.

Marine organisms had MPs prevalence ranging from 19% to 100%, whereas sediments and water samples had between 77 and 100%. The most common and dominant polymers included polypropylene and polyethylene.

This review shows that most studies still use methods that are prone to human errors. Therefore, the concentration of MPs is likely underestimated, even though the authors’ prevalence evaluations show MPs are still largely pervasive across multiple environmental matrices. Also, the study reveals significant spatial disparity in MP research across the African continent, showing the need for further research in other African countries.

Even though some reviews have assessed MPs pollution in Africa, they have not evaluated sample prevalence, which is necessary to understand not only concentration but pervasiveness across the continent. Secondly, this study delves deeper into various methods of sampling, extraction and analysis of MPs, as well as limitations and relevant recommendations.

Due to the rapid increase in environmental degradation and depletion of natural resources, there has been a recent shift in global focus from economic concerns to environmental ones. The purpose of this research is to examine the relevant literature on the use of blockchain technology to promote environmental sustainability through customer integration.

The proposed framework is based on the theoretical lens of systems theory (ST) and knowledge-based view (KBV) theory, and is developed by conducting a systematic literature review of 51 articles, (16) from 2022, (17) from 2021, (10) 2020, (5) 2019, (2) 2018 and (1) from 2017 on blockchain technology (BCT), environmental supply chain performance (ESCP) and customer integration.

Three main propositions are formulated and demonstrated using the developed framework, which shows that BCT has the potential to revolutionize the supply chain from an environmental sustainability perspective through facilitating waste management, reduction of energy consumption and reduction of carbon emissions/pollution. The technology will not only enhance the environmental sustainability but also facilitate customer integration through resolving transparency issues, protecting data/enhancing security, database decentralization, promoting trust and immutability.

The effects of blockchain on supply chain performance has been studied in the past; however, no studies were found which shed light on how BCT can affect ESCP through the mediation of customer integration.

This study aims to investigate the fabrication of solid ankle foot orthoses (SAFOs) using fused deposition modeling (FDM) printing technology. It emphasizes cost-effective 3D scanning with the Kinect sensor and conducts a comparative analysis of SAFO durability with varying thicknesses and materials, including polylactic acid (PLA) and carbon fiber-reinforced (PLA-C), to address research gaps from prior studies.

In this study, the methodology comprises key components: data capture using a cost-effective Microsoft Kinect® Xbox 360 scanner to obtain precise leg dimensions for SAFOs. SAFOs are designed using CAD tools with varying thicknesses (3, 4, and 5 mm) while maintaining consistent geometry, allowing controlled thickness impact investigation. Fabrication uses PLA and PLA-C materials via FDM 3D printing, providing insights into material suitability. Mechanical analysis uses dual finite element analysis to assess force–displacement curves and fracture behavior, which were validated through experimental testing.

The results indicate that the precision of the scanned leg dimensions, compared to actual anthropometric data, exhibits a deviation of less than 5%, confirming the accuracy of the cost-effective scanning approach. Additionally, the research identifies optimal thicknesses for SAFOs, recommending a 4 and 5 mm thickness for PLA-C-based SAFOs and an only 5 mm thickness for PLA-based SAFOs. This optimization enhances the overall performance and effectiveness of these orthotic solutions.

This study’s innovation lies in its holistic approach, combining low-cost 3D scanning, 3D printing and computational simulations to optimize SAFO materials and thickness. These findings advance the creation of cost-effective and efficient orthotic solutions.

This paper aims to review the topic of “luxury fashion consumption”, a field of recent interest for academics and practitioners. However, a literature review that can map the existing knowledge and aggregate it into relevant topics and offers a research agenda for future research is still lacking.

This paper uses a systematic review and a text mining approach to analyse 73 articles on luxury fashion consumption aiming to clarify, rationalise and critically interpret the literature on luxury fashion consumption; identify the core topic, create an integrative framework of core constructs; and offer research gaps and suggest a research agenda for future studies.

From this analysis, eight major research topics are found and analysed (brand desire, authenticity, luxury markets, value perceptions, luxury retail experience, luxury brands communication, responsible consumption and sustainability and status signalling). Based on these topics and following the TCM framework, this review offers directions for future research.

This research offers a text-mining review of luxury fashion consumption to help scholars and managers further develop this field, as there is no comprehensive review on the topic exploring the themes, theories, constructs and methods used in prior studies.

Este artículo pretende revisar el “consumo de moda de lujo”, un tema de reciente interés para académicos y profesionales. Sin embargo, sigue faltando una revisión de la literatura que pueda ordenar el conocimiento existente y aglutinarlo en temas relevantes y que ofrezca una agenda de investigación futura.

Este trabajo emplea una revisión sistémica de la literatura y la minería de textos para analizar 73 artículos sobre el consumo de moda de lujo con el objetivo de (i) aclarar, racionalizar e interpretar críticamente la literatura sobre el consumo de moda de lujo, (ii) identificar el tema central, crear un marco integrador de constructos clave y (iii) presentar las lagunas de la investigación y sugerir una agenda de investigación para futuros estudios.

A partir de este análisis, se identifican y analizan ocho temas principales de investigación (el deseo de marca, la autenticidad, los mercados de lujo, las percepciones de valor, la experiencia de la venta al por menor de lujo, la comunicación de las marcas de lujo, el consumo responsable y la sostenibilidad, y la señalización de estatus). Sobre la base de estos temas y siguiendo el marco del TCM, esta revisión propone líneas para futuras investigaciones.

Esta investigación ofrece una revisión de la minería de textos sobre el consumo de moda de lujo para ayudar a los académicos y gestores a seguir desarrollando este campo, ya que no existe una revisión exhaustiva sobre el tema que explore los conceptos, teorías, constructos y métodos utilizados en estudios previos.

Revisión de la literatura

本文旨在回顾 “奢侈时尚消费”, 这是学术界和从业人员最近关注的一个话题。然而, 目前仍然未能将现有知识分类并为未来研究提供议程的文献回顾。

本文使用系统的文献综述和文本挖掘, 分析了73篇关于奢侈时尚消费的文章。此文目的是：（1）批判性地解释关于奢侈时尚消费的文献; （2）确定中心主题, 建立综合框架; （3）提出研究缺憾, 为未来的研究提出议程。

从这个分析中, 我们发现并分析了八个主要的研究主题（品牌欲望、真实性、奢侈品市场、价值认知、奢侈品零售体验、奢侈品品牌传播、负责任的消费和可持续性、以及地位信号）。基于这些主题并遵循TCM框架, 本评论提出了未来研究的方向。

目前还没有关于该主题的全面文献回顾, 以探索以前研究中使用的概念、理论、构造和方法。本研究对奢侈时尚消费的文本挖掘进行了回顾, 以帮助学者和管理者进一步发展该领域。

文献评论

This study aims to extend and explore patterns and trends of research in the linkage of big data and knowledge management (KM) by identifying growth in terms of numbers of papers and current and emerging themes and to propose areas of future research.

The study was conducted by systematically extracting, analysing and synthesizing the literature related to linkage between big data and KM published in top-tier journals in Web of Science (WOS) and Scopus databases by exploiting bibliometric techniques along with theory, context, characteristics, methodology (TCCM) analysis.

The study unfolds four major themes of linkage between big data and KM research, namely (1) conceptual understanding of big data as an enabler for KM, (2) big data–based models and frameworks for KM, (3) big data as a predictor variable in KM context and (4) big data applications and capabilities. It also highlights TCCM of big data and KM research through which it integrates a few previously reported themes and suggests some new themes.

This study extends advances in the previous reviews by adding a new time line, identifying new themes and helping in the understanding of complex and emerging field of linkage between big data and KM. The study outlines a holistic view of the research area and suggests future directions for flourishing in this research area.

This study highlights the role of big data in KM context resulting in enhancement of organizational performance and efficiency. A summary of existing literature and future avenues in this direction will help, guide and motivate managers to think beyond traditional data and incorporate big data into organizational knowledge infrastructure in order to get competitive advantage.

To the best of authors’ knowledge, the present study is the first study to go deeper into understanding of big data and KM research using bibliometric and TCCM analysis and thus adds a new theoretical perspective to existing literature.

Digital supply chains require nascent technologies like blockchain and Internet of Things (IoT). There is a need to develop a roadmap for the implementation of these technologies, as they require a huge amount of resources and infrastructure. The purpose of this paper is to analyze the challenges of implementing blockchain-IoT integrated architecture in the green supply chain and develop strategies for the same.

After a thorough literature survey of Scopus-indexed journals and books, 37 barriers were identified, which were then brought down to 15 barriers after confirming with industry and academic experts using the Delphi method. Using the total interpretive structural modeling (TISM) method and cross-impact matrix multiplication applied to classification (MICMAC) analysis, the barriers were modeled, and finally, strategies were formulated using a concept map to handle the barriers in the blockchain-IoT integrated architecture for a green supply chain.

This paper presents the research on barriers that can be considered for incorporating blockchain and IoT in the green supply chain. It was found from the TISM model that environmental concerns are Level-1 barriers and need to be addressed by developing appropriate technology and allocating funds for the same. An integrated ecosystem with blockchain and IoT is developed.

The focus of this study was on the challenges of blockchain and IoT; hence, it is required to extend the research and find challenges for different industries and also analyze the criteria using other multi-criteria decision-making (MCDM) methods. Further research is required for the integration of blockchain-IoT with supply chain functions.

The transformation of a traditional supply chain into a green supply chain is possible with the integration of technologies. This research work and the strategies developed are useful to managers and practitioners working on technology implementation. Planning resources and addressing key barriers is possible with the concept maps and architecture developed.

Green supply chain management (SCM) is gaining importance in industry as well as the academic sector due to government Policies and norms worldwide for reducing emissions and encouraging environment-friendly production systems. Incorporating blockchain and IoT in a green supply chain will further digitize and increase transparency in supply chains.

We have done a categorization of all barriers based on the expert survey by academicians and industry experts from industries in India. The concept map helps in identifying possible solutions for the challenges and initiatives to be taken for the smooth integration of technologies in the green supply chain.