Search results

The food supply chain worldwide has suffered severely due to the COVID-19 pandemic countermeasures. Previous research suggests that business model innovation (BMI) could be a viable solution for recovering from the pandemic and fostering organizational resilience. This study analyzes the capabilities that enable food companies to innovate their business model and thereby increase organizational resilience.

Results were obtained using a multiple-case study approach consisting of 15 companies along the entire food supply chain. Managers and decision-makers were interviewed, and the collected insights were enriched with additional material.

The results show several capabilities that enable companies to innovate their business model due to disruption. These capabilities are categorized into four phases based on the processual representation of BMIs.

This study contributes to the understanding of BMI in the food supply chain and provides empirical evidence on the potential for business recovery through BMI.

Many buildings fail to meet user expectations, causing a performance gap. Pre-occupancy evaluation (PrOE) is believed to have the potential to close the gap. It enables designers to obtain end-user feedback in the design phase and improve the design for better performance. However, PrOE implementation faces challenges due to still maturing knowledgebase. This study aims to understand the state-of-the-art knowledge of PrOE, thereby identifying future research needs to advance the domain.

A systematic literature review following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) framework was conducted. A thorough search in five databases and Google Scholar retrieved 90 articles, with 30 selected for systematic review after eliminating duplicates and irrelevant articles. Bibliometric analyses were performed using VOSviewer and Biblioshiny on the article metadata, and thematic analyses were conducted on their contents.

PrOE is a vehicle for engaging building end-users in the design phase to address the credibility gap caused by the discrepancies between the expected and actual performance of buildings. PrOE has gained limited applications in healthcare, residential, office and educational building design for two broad purposes: design management and marketing. Using virtual reality technologies for PrOE has demonstrated significant benefits. Yet, the PrOE domain needs to mature in multiple perspectives to serve its intended purpose effectively.

This study identifies four knowledge gaps for future research to advance the PrOE domain: (1) developing a holistic PrOE framework, integrating comprehensive performance evaluation criteria, useable at different stages of the design phase and multi-criteria decision algorithms, (2) developing a mixed reality tool, embodying the holistic PrOE framework, (3) formulating a PrOE framework for adaptive reuse of buildings and (4) managing uncertainties in user requirements during the lifecycle in PrOE decisions.

The purpose of this paper is to establish a maturity evaluation model for the application of construction steel structure welding robotics suitable for the actual situation and specific characteristics of engineering projects in China and then to assess the maturity level of the technology in the application of domestic engineering projects more scientifically.

The research follows a qualitative and quantitative analysis method. In the first stage, the structure of the maturity model is constructed and the evaluation index system is designed by using the ideas of the capability maturity model and WSR methodology for reference. In the second stage, the design of the evaluation process and the selection of evaluation methods (analytic hierarchy process method, multi-level gray comprehensive evaluation method). In the third stage, the data are collected and organized (preparation of questionnaires, distribution of questionnaires, questionnaire collection). In the fourth stage, the established maturity evaluation model is used to analyze the data.

The evaluation model established by using multi-level gray theory can effectively transform various complex indicators into an intuitive maturity level or score status. The conclusion shows that the application maturity of building steel structure welding robot technology in this project is at the development level as a whole. The maturity levels of “WuLi – ShiLi – RenLi” are respectively: development level, development level, between starting level and development level. Comparison of maturity evaluation values of five important factors (from high to low): environmental factors, technical factors, management factors, benefit factors, personnel and group factors.

In this paper, based on the existing research related to construction steel structure welding robot technology, a quantitative and holistic evaluation of the application of construction steel structure welding robot technology in domestic engineering projects is conducted for the first time from a project perspective by designing a maturity evaluation index system and establishing a maturity evaluation model. This research will help the project team to evaluate the application level (maturity) of the welding robot in the actual project, identify the shortcomings and defects of the application of this technology, then improve the weak links pertinently, and finally realize the gradual improvement of the overall application level of welding robot technology for building steel structure.

This paper investigates a problem in a reverse logistics (RLs) network to decide whether to dispose of unsold goods in primary stores or re-commercialize them in outlet centers. By deducting the costs associated with each policy from its revenue, this study aims to maximize the profit from managing unsold goods.

A new mixed-integer linear programming model has been developed to address the problem, which considers the selling prices of products in primary and secondary stores and the costs of transportation, cross-docking and returning unwanted items. As a result of uncertain nature of the cost and time parameters, gray numbers are used to deal with it. In addition, an innovative uncertain solution approach for gray programming problems is presented that considers objective function satisfaction level as an indicator of optimism.

According to the results, higher costs, including transportation, cross-docking and return costs, make sending goods to outlet centers unprofitable and more goods are disposed of in primary stores. Prices in primary and secondary stores heavily influence the number of discarded goods. Higher prices in primary stores result in more disposed of goods, while higher prices in secondary stores result in fewer. As a result of the proposed method, the objective function satisfaction level can be viewed as a measure of optimism.

An integral contribution of this study is developing a new mixed-integer linear programming model for selecting the appropriate goods for re-commercialization and choosing the best outlet center based on the products' price and total profit. Another novelty of the proposed model is considering the matching percentage of boxes with secondary stores’ desired product lists and the probability of returning goods due to non-compliance with delivery dates. Moreover, a new uncertain solution approach is developed to solve mathematical programming problems with gray parameters.

Software defect prediction (SDP) is a critical aspect of software quality assurance, aiming to identify and manage potential defects in software systems. In this paper, we have proposed a novel hybrid approach that combines Gray Wolf Optimization with Feature Selection (GWOFS) and multilayer perceptron (MLP) for SDP. The GWOFS-MLP hybrid model is designed to optimize feature selection, ultimately enhancing the accuracy and efficiency of SDP. Gray Wolf Optimization, inspired by the social hierarchy and hunting behavior of gray wolves, is employed to select a subset of relevant features from an extensive pool of potential predictors. This study investigates the key challenges that traditional SDP approaches encounter and proposes promising solutions to overcome time complexity and the curse of the dimensionality reduction problem.

The integration of GWOFS and MLP results in a robust hybrid model that can adapt to diverse software datasets. This feature selection process harnesses the cooperative hunting behavior of wolves, allowing for the exploration of critical feature combinations. The selected features are then fed into an MLP, a powerful artificial neural network (ANN) known for its capability to learn intricate patterns within software metrics. MLP serves as the predictive engine, utilizing the curated feature set to model and classify software defects accurately.

The performance evaluation of the GWOFS-MLP hybrid model on a real-world software defect dataset demonstrates its effectiveness. The model achieves a remarkable training accuracy of 97.69% and a testing accuracy of 97.99%. Additionally, the receiver operating characteristic area under the curve (ROC-AUC) score of 0.89 highlights the model’s ability to discriminate between defective and defect-free software components.

Experimental implementations using machine learning-based techniques with feature reduction are conducted to validate the proposed solutions. The goal is to enhance SDP’s accuracy, relevance and efficiency, ultimately improving software quality assurance processes. The confusion matrix further illustrates the model’s performance, with only a small number of false positives and false negatives.

This paper aims to investigate the influence of “BroncoCut-X” (copper core-ZnCu50 coating) electrode on the machining of Ti-3Al-2.5V in view of its extensive use in aerospace and medical applications. The machining parameters are selected as Spark-off Time (ST_off), Spark-on Time (ST_on), Wire-speed (S_w), Wire-Tension (WT) and Servo-Voltage (S_v) to explore the machining outcomes. The response characteristics are measured in terms of material removal rate (MRR), average kerf width (KW) and average-surface roughness (SA).

Taguchi’s approach is used to design the experiment. The “AC Progress V2 high precision CNC-WEDM” is used to conduct the experiments with ϕ 0.25 mm diameter wire electrode. The machining performance characteristics are examined using main effect plots and analysis of variance. The grey-relation analysis and fuzzy interference system techniques have been developed to combine (called grey-fuzzy reasoning grade) the experimental response while Rao-Algorithm is used to calculate the optimal performance.

The hybrid optimization result is obtained as ST_off = 50µs, ST_on = 105µs, S_w = 7 m/min, WT = 12N and S_v=20V. Additionally, the result is compared with the firefly algorithm and improved gray-wolf optimizer to check the efficacy of the intended approach. The confirmatory test has been further conducted to verify optimization results and recorded 8.14% overall machinability enhancement. Moreover, the scanning electron microscopy analysis further demonstrated effectiveness in the WEDMed surface with a maximum 4.32 µm recast layer.

The adopted methodology helped to attain the highest machinability level. To the best of the authors’ knowledge, this work is the first investigation within the considered parametric range and adopted optimization technique for Ti-3Al-2.5V using the wire-electro discharge machining.

The paper aims to contribute conceptually to the conversation about organizational models and to the future development of an organizational diagnostic method, based on the human being seen as an allopoietic information processing gray box.

Methodologically, the approach is qualitative and interpretative, using the concepts of autopoiesis and allopoiesis of H. Maturana and F. Varela, the ideas of cybernetic machine, black box and functional homomorphism of W.R. Ashby, moving from the human being to the organizations producing goods and/or services.

Observing the human being as an allopoietic gray box allowed us to confirm the human being as an information-producing entity and the nervous system as its productive component. The functions distinguished were to emote, feel, perceive, think, memorize, decide, communicate, regulate, control, coordinate and move. Similarly, the proposed organizational model is composed of the same functions in which emoting is homologated with distributed leadership for the achievement of the organizational climate and to move with production. Notwithstanding the circularity of affectation between the functional components, the climate is the basis of organizational operation and consequently, the decisional closure distributed between owners and employees.

This is a theoretical proposal that needs to be discussed, and although there are precedents that could help in this regard, it is essential to enrich the model and derive thereof specific tools that can be applied.

A general model is provided from which methods of organizational design, diagnosis and treatment could be derived.

The proposed model is expected to be a contribution to organizational research discussion.

It is considered that the work has a certain degree of originality when proposing a functional organizational model of a general nature, based on the emotionality of the people that constitute it.

It is important to understand the factors that are significant in supply chain (SC) collaboration decision making and whether supply chain collaborative factors that are considered in the literature are still valid. To date, SC collaboration has not been extensively studied in the literature with supply chain finance (SCF) factors to evaluate SCF performance. Therefore, in this paper, the authors investigate the interrelationships between SCF and supply chain collaborative (SCC) factors for achieving SCF performance. The authors identified the most important factors from the literature on SCF and SCC and with inputs from experts in the textile industry in Pakistan.

The authors employed the Gray-Decision Making Trial and Evaluation Laboratory approach to help examine the cause-and-effect relationship between the factors and identify the influence of each factor on the others.

The findings showed that the most prominent factors of the study are “level of digitalization”, “information sharing”, and “collaborative communication”, and “most effect factors of this study are incentive alignment” and “information quality”. Furthermore, the “Level of digitalization” was identified as the factor with the central role and most significant correlation with other factors.

The major implication of the study is that textile industries should effectively develop their supply chain decisions after analyzing their internal and external factors, which will help in developing strategies that will facilitate better management of SCF relationships. The limitations of the study are that only 15 SCF and supply chain collaborative factors were considered, and time and scope are also limited. This study is only applied in the textile industry, so generalization may be limited.

To date, this study is the only one that has taken into consideration SCC with SCF factors to evaluate supply chain performance. This paper therefore makes this initial attempt and original contribution to this discussion, which can be helpful for those working to enhance supply chain performance, such as practitioners and policymakers.

This study aims to establish an evaluation method for cross-regional major infrastructure project (CRMIP) supportability. The focus is to identify evaluation indicators from a complexity perspective and develop an evaluation model using qualitative and quantitative methods. Case studies are carried out to verify the reliability of the evaluation model, thereby providing theoretical and practical guidance for CRMIP operations and maintenance (O&M).

Guided by the idea of complexity management, the evaluation indicators of CRMIP supportability are determined through literature analysis, actual O&M experience and expert interviews. A combination of qualitative and quantitative methods, consisting of sequential relationship analysis, entropy weighting, game theory and cloud model, is developed to determine the indicator weights. Finally, the evaluation model is used to evaluate the supportability of the Hong Kong–Zhuhai–Macao Bridge (HZMB), which tests the rationality of the model and reveals its supportability level.

The results demonstrate that CRMIPs' supportability is influenced by 6 guideline-level and 18 indicator-level indicators, and the priority of the influencing factors includes “organization,” “technology,” “system,” “human resources,” “material system,” and “funding.” As for specific indicators, “organizational objectives,” “organizational structure and synergy mechanism,” and “technical systems and procedures” are critical to CRMIPs' O&M supportability. The results also indicate that the supportability level of the HZMB falls between good and excellent.

Under the guidance of complexity management thinking, this study proposes a supportability evaluation framework based on the combined weights of game theory and the cloud model. This study provides a valuable reference and scientific judgment for the health and safety of CRMIPs' O&M.

The Grey System Theory (GST) is an emerging area of research within artificial intelligence. Since its founding in 1982, it has seen a lot of multidisciplinary applications. In just a short period, it has garnered some considerable strengths. Based on the 1987–2021 data collected from the Web of Science (WoS), the current study reports the advancement of the GST.

Research papers utilizing the GST in the fields of economics and education were retrieved from the Web of Science (WoS) platform using a set of predetermined keywords. In the final stage of the process, the papers that underwent analysis were manually chosen, with selection criteria based on the information presented in the titles and abstracts.

The study identifies prominent authors, institutions, publications and journals closely associated with the subject. In terms of authors, two major clusters are identified around Liu SF and Wang ZX, while the institution with the highest number of publications is Nanjing University of Aeronautics and Astronautics. Moreover, significant keywords, trends and research directions have been extracted and analyzed. Additionally, the study highlights the regions where the theory holds substantial influence.

The study is subject to certain limitations stemming from factors such as the language employed in the chosen literature, the papers included within the Web of Science (WoS) database, the designation of works categorized as “articles” in the database, the specific selection of keywords and keyword combinations, and the meticulous manual process employed for paper selection. While the manual selection process itself is not inherently limiting, it demands a greater investment of time and meticulous attention, contributing to the overall limitations of the study.

The significance of the study extends not only to scholars and practitioners but also to readers who observe the development of emerging scientific disciplines.

The analysis of trends revealed a growing emphasis on the application of GST in diverse domains, including supply chain management, manufacturing and economic development. Notably, the emergence of COVID-19 as a new research focal point among GST scholars is evident. The heightened interest in COVID-19 can be attributed to its global impact across various academic disciplines. However, it is improbable that this interest will persist in the long term, as the pandemic is gradually brought under control.