Search results

Pre-positioning and distributing relief items are important parts of disaster management as it simultaneously considers activities from both pre- and post-disaster stages. This study aims to address this problem with a novel mathematical model.

In this research, a bi-objective mixed-integer linear programming model is developed to tackle pre-positioning and distributing relief items, and it is formulated as an integrated location-allocation-routing problem with uncertain parameters. The humanitarian supply chain consists of relief facilities (RFs) and demand points (DPs). Perishable and imperishable relief commodities (RCs), different types of vehicles, different transportation modes, a time window for delivering perishable commodities and the occurrence of unmet demand are considered. A scenario-based game theory is applied for purchasing RCs from different suppliers and an integrated best-worst method-technique for order of preference by similarity to ideal solution technique is implemented to determine the importance of DPs. The proposed model is used to solve several random test problems for verification, and to validate the model, Iran’s flood in 2019 is investigated as a case study for which useful managerial insights are provided.

Managers can effectively adjust their preferences towards response time and total cost of the network and use sensitivity analysis results in their decisions.

The model locates RFs, allocates DPs to RFs in the pre-disaster stage, and determines the routing of RCs from RFs to DPs in the post-disaster stage with respect to minimizing total costs and response time of the humanitarian logistics network.

Wireless sensor networks (WSN), as a solution for buried water pipe monitoring, face a new set of challenges compared to traditional application for above-ground infrastructure monitoring. One of the main challenges for underground WSN deployment is the limited range (less than 3 m) at which reliable wireless underground communication can be achieved using radio signal propagation through the soil. To overcome this challenge, the purpose of this paper is to investigate a new approach for wireless underground communication using acoustic signal propagation along a buried water pipe.

An acoustic communication system was developed based on the requirements of low cost (tens of pounds at most), low power supply capacity (in the order of 1 W-h) and miniature (centimetre scale) size for a wireless communication node. The developed system was further tested along a buried steel pipe in poorly graded SAND and a buried medium density polyethylene (MDPE) pipe in well graded SAND.

With predicted acoustic attenuation of 1.3 dB/m and 2.1 dB/m along the buried steel and MDPE pipes, respectively, reliable acoustic communication is possible up to 17 m for the buried steel pipe and 11 m for the buried MDPE pipe.

Although an important first step, more research is needed to validate the acoustic communication system along a wider water distribution pipe network.

This paper shows the possibility of achieving reliable wireless underground communication along a buried water pipe (especially non-metallic material ones) using low-frequency acoustic propagation along the pipe wall.

Although earlier research suggests a positive relationship exists between engaging in entrepreneurial marketing activities and firm performance, there may be contingent issues that impact the association. This investigation unpacks the relationship between entrepreneurial marketing behaviour and firm performance under the moderating role of coopetition, in an immediate post-COVID-19 period.

A resource-based theoretical lens, alongside an outside-in perspective, underpins this study. Following 20 field interviews, survey responses via an online survey were obtained from 306 small, passive exporting wine producers with a domestic market focus in the United States. The data passed all major robustness checks.

The statistical findings indicated that entrepreneurial marketing activities positively and significantly influenced firm performance, while coopetition provided a non-significant moderation effect. Field interviews suggested that entrepreneurs’ attemps to scale up from passive to more active export activities in an immediate post-pandemic period helped explain the findings. Owner-managers rejoined trustworthy and complementary pre-pandemic coopetition partners in the immediate aftermath of coronavirus disease 2019 (COVID-19) for domestic market activities. In contrast, they had to minimise risks from dark-side/opportunistic behaviour when joining coopetition networks with partners while attempting to scale up export market activities.

Unique insights emerge to unpack the entrepreneurial marketing–performance relationship via the moderation effect of coopetition, namely, with the temporal setting of an immediate post-COVID-19 period. Firstly, new support arises regarding the likely performance-enhancing impact of owner-managers’ engagement in entrepreneurial marketing practices. Secondly, novel findings emerge in respect of the contrasting role of coopetition in both domestic and export market activities. Thirdly, new evidence arises in relation to a resource-based theoretical lens alongside an outside-in perspective, whereby, strategic flexibility in pivoting facets of a firm’s business model needs effective management following a crisis.

This study aims to focus on the main materials used in consolidation processes of illuminated paper manuscripts and leather binding.

For each material, chemical structure, chemical composition, molecular formula, solubility, advantages, disadvantages and its role in treatment process are presented.

This study concluded that carboxy methyl cellulose, hydroxy propyl cellulose, methyl cellulose, cellulose acetate, nanocrystalline cellulose, funori, sturgeon glue, poly vinyl alcohol, chitosan, chitosan nanoparticles (NPs), gelatin, aquazol, paraloid B72 and hydroxyapatite NPs were the most common and important materials used for the consolidation of illuminated paper manuscripts. For the leather bindings, hydroxy propyl cellulose, polyethylene glycol, oligomeric melamine-formaldehyde resin, acrylic wax SC6000, pliantex, paraloid B67 and B72, silicone oil and collagen NPs are the most consolidants used.

Illuminated paper manuscripts with leather binding are considered one of the most important objects in libraries, museums and storehouses. The uncontrolled conditions and other deterioration factors inside the libraries and storehouses lead to degradation of these artifacts. The brittleness, fragility and weakness are considered the most common deterioration aspects of illuminated paper manuscripts and leather binding. Therefore, the consolidation process became vital and important to solve this problem. This study presents the main materials used for consolidation process of illuminated paper manuscripts and leather bindings.

The recent failures and insolvencies of organisations related to the modern methods of construction (MMC) have gained increased attention and controversy across the UK construction sector. Such failures are linked to their inability to achieve an economy of scale and drive key clients to accept the MMC as an alternative to traditional methods. This paper aims to unravel whether a phenomenon of “innovation negativism” has manifested and is contributing to public clients' indecision towards broader MMC, whether this is only linked to past negative experiences formed after the Second World War or whether additional contributing reasons exist to influence adoption.

This study focusses on exploring the decision-making of the UK public construction sector; therefore, this paper adopts a qualitative approach, utilising interviews with 14 carefully selected MMC experts, government advisors and public clients. The phenomenological stance adopted herewith enables the authors to make better sense of the perceptions of the interviewees, leading to the conceptualisation of the innovation negativism phenomenon.

The paper identifies nine themes that may be argued to promote a profound understanding of the MMC negativism influencing public clients' decision-making. The study has found that more than just the previous negative perceptions formulated post Second World War are driving innovation negativism in the UK public sector. Notably, the emerging themes are incomprehension, lacking evidence, communication, relationship history, bad experiences, uncertainty, inadequate experimentation, the business case and localism.

This study is the first construction management research that acts as a fair departure point to conceptualise the reasoning behind innovation negativism in the construction setting. Through mirroring demand's unipolarity for traditional methods, policy and decision-makers can now rely on the conceptualised reasoning to determine practical solutions to overcome clients' indecisions towards MMC.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

This paper presents an experimental investigation in establishing the relationship between FDM process parameters and tensile strength of polycarbonate (PC) samples using the I-Optimal design.

I-optimal design methodology is used to plan the experiments by means of Minitab-17.1 software. Samples are manufactured using Stratsys FDM 400mc and tested as per ISO standards. Additionally, an artificial neural network model was developed and compared to the regression model in order to select an appropriate model for optimisation. Finally, the genetic algorithm (GA) solver is executed for improvement of tensile strength of FDM built PC components.

This study demonstrates that the selected process parameters (raster angle, raster to raster air gap, build orientation about Y axis and the number of contours) had significant effect on tensile strength with raster angle being the most influential factor. Increasing the build orientation about Y axis produced specimens with compact structures that resulted in improved fracture resistance.

The fitted regression model has a p-value less than 0.05 which suggests that the model terms significantly represent the tensile strength of PC samples. Further, from the normal probability plot it was found that the residuals follow a straight line, thus the developed model provides adequate predictions. Furthermore, from the validation runs, a close agreement between the predicted and actual values was seen along the reference line which further supports satisfactory model predictions.

This study successfully investigated the effects of the selected process parameters - raster angle, raster to raster air gap, build orientation about Y axis and the number of contours - on tensile strength of PC samples utilising the I-optimal design and ANOVA. In addition, for prediction of the part strength, regression and ANN models were developed. The selected ANN model was optimised using the GA-solver for determination of optimal parameter settings.

The proposed ANN-GA approach is more appropriate to establish the non-linear relationship between the selected process parameters and tensile strength. Further, the proposed ANN-GA methodology can assist in manufacture of various industrial products with Nylon, polyethylene terephthalate glycol (PETG) and PET as new 3DP materials.

This study aims to assess how real income, oil prices and gold prices affect housing prices in China from 2010 to 2021.

This study uses a novel bootstrap autoregressive distributed lag (ARDL) testing to empirically analyze the short and long links among the tested variables.

The ARDL estimations demonstrate a positive impact of oil price shocks and real income on housing market prices in both the phrases of the short and long run. Furthermore, the results reveal that gold price shocks negatively affect housing prices both in the short and long run. The result can be attributed to China’s housing market and advanced infrastructure, resulting in a drop in housing prices as gold prices increase. Additionally, the prediction of housing market prices will provide a base and direction for housing market investors to forecast housing prices and avoid losses.

To the best of the authors’ knowledge, this is the first attempt to analyze the effect of gold price shocks on housing market prices in China.

Purpose: This chapter aims to find the impact of cultural marketing on consumer buying behaviour and analyse the cultural factors affecting consumers’ buying behaviour. Cultural marketing aims to offer and promote a product, a message, or a service to a group of people who may be their potential purchasers and belong to the same culture or particular demographic.

Methodology: This study uses the published research for different countries viz. India, Canada, Germany, the UAE, the UK, the USA, Japan, etc., in the field of culture, cross-culture, and consumer buying behaviour considering various factors and their impact; but in particular, this study focussed on the cultural factors only and analysed their impact on the consumer behaviour of the different countries.

Findings: The study revealed that different countries have their own unique culture. Cultural factors have a positive relationship with consumers’ buying behaviour and exhibit that consumers behave differently towards the same product as per their perception developed by their culture.

Need of the study: Today, the world has become global, and to become a successful consumer oriented market service provider, marketers have to study the psychology of the customers to procure them. This study focusses on one of the essential factors, that is, culture and how cultural factors affect consumer buying behaviour. The study of culture is the gateway to attracting consumers in the market.

Practical implications: The study would help multinational companies in segmentation, targeting, and positioning and developing several marketing strategies for their products. Companies would be able to understand changes in consumer purchasing behaviours that arise from cultural differences, which helps them cater to the needs of their global consumers.

This paper aims to meta-analyze the results of the prior studies related to the relationship of human capital and financial performance in Islamic banking.

To examine the relationship between human capital and financial of Islamic banks, 23 empirical studies having sample of 15,607 are considered for the meta-analysis. Moreover, different measures related to financial performance including return on assets (ROA), return of equity (ROE) and Tobin’s Q have been taken as moderating for further subgroup analysis.

The results of meta-analysis reveal a positive correlation between human capital and financial performance with an effect size of 0.268. The subgroup analyses showed significant positive associations of human capital with ROA and ROE, insignificant with Tobin’s Q.

This study suggests Islamic banking should prioritize human capital development, maintain consistency and adopt a long-term perspective. Future research should consider context-specific factors and harmonize human capital and financial performance measurements for consensus.