Search results

A saturated iron core superconducting fault current limiter (SISFCL) has an important role to play in the present-day power system, providing effective protection against electrical faults and thus ensuring an uninterrupted supply of electricity to the consumers. Previous mathematical models developed to describe the SISFCL use a simple flux density-magnetic field intensity curve representing the ferromagnetic core. As the magnetic state of the core affects the efficient working of the device, this paper aims to present a novel approach in the mathematical modeling of the device with the inclusion of hysteresis.

The Jiles–Atherton’s hysteresis model is utilized to develop the mathematical model of the limiter. The model is numerically solved using MATLAB. To support the validity of model, finite element model (FEM) with similar specifications was simulated.

Response of the limiter based on the developed mathematical model is in close agreement with the FEM simulations. To illustrate the effect of the hysteresis, the responses are compared by using three different hysteresis characteristics. Harmonic analysis is performed and comparison is carried out utilizing fast Fourier transform and continuous wavelet transform. It is observed that the core with narrower hysteresis characteristic not only produces a better current suppression but also creates a higher voltage drop across the DC source. It also injects more harmonics in the system under fault condition.

Inclusion of hysteresis in the mathematical model presents a more realistic approach in the transient analysis of the device. The paper provides an essential insight into the effect of the core hysteresis characteristic on the device performance.

With the development of 3D printing or additive manufacturing (AM), curved layer fused deposition modeling (CLFDM) has been researched to cope with the flat layer AM inherited problems, such as stair-step error, anisotropy and the time-cost and material-cost problems from the supporting structures. As one type of CLFDM, cylindrical slicing has obtained some research attention. However, it can only deal with rotationally symmetrical parts with a circular slicing layer, limiting its application. This paper aims to propose a ray-based slicing method to increase the inter-layer strength of flat layer-based AM parts to deal with more general revolving parts.

Specifically, the detailed algorithm and implementation steps are given with several examples to enable readers to understand it better. The combination of ray-based slicing and helical path planning has been proposed to consider the nonuniform path spacing between the adjacent paths in the same curved layer. A brief introduction of the printing system is given, mainly including a 3D printer and the graphical user interface.

The preliminary experiments are successfully conducted to verify the feasibility and versatility of the proposed and improved slicing method for the revolving thin-wall parts based on a rotary 3D printer.

This research is early-stage work, and the authors are intended to explore the process and show the initial feasibility of ray-based slicing for revolving thin-wall parts using a rotary 3D printer. In general, this research provides a novel and feasible slicing method for multiaxis rotary 3D printers, making manufacturing revolving thin-wall and complex parts possible.

The rapid development of three-dimensional (3D) printing makes it familiar in daily life, especially the fused deposition modeling 3D printers. The process planning of traditional flat layer printing includes slicing and path planning to obtain the boundaries and the filling paths for each layer along the vertical direction. There is a clear division line through the whole fabricated part, inherited in the flat-layer-based printed parts. This problem is brought about by the seam of the boundary in each layer. Hence, the purpose of this paper is to propose a novel helical filling path generation with the ideal surface-plane intersection for a rotary 3D printer.

The detailed algorithm and implementation steps are given with several worked examples to enable readers to understand it better. The adjacent points obtained from the planar slicing are combined to generate each layer's helical points. The contours of all layers are traversed to obtain the helical surface layer and helical path. Meanwhile, the novel rotary four-degree of freedom 3D printer is briefly introduced.

As a proof of concept, this paper presents several examples based on the rotary 3D printer designed in the authors’ previous research and the algorithms illustrated in this paper. The preliminary experiments successfully verify the feasibility and versatility of the proposed slicing method based on a rotary 3D printer.

This paper provides a novel and feasible slicing method for multi-axis rotary 3D printers, making manufacturing thin-wall and complex parts possible. To further broaden the proposed slicing method’s application in further research, adaptive tool path generation for flat and curved layer printing could be applied with a combination of flat and curved layers in the same layer, different layers or even different parts of structures.

The purpose of this paper is to study the feasibility of the fabrication of circle arc curved-layered structures via conventional fused deposition modeling (FDM) with three-axis machines and to identify the main structural parameters that have an influence on their mechanical properties.

Customized G-codes were generated via a script developed in MATLAB. The G-codes contain nozzle trajectories with displacements in the three axes simultaneously. Using these, the samples were fabricated with different porosities, and their influence on the mechanical responses evaluated via tensile testing. The load-displacement curves were analyzed to understand the structure-property relationship.

Circled arc curved-layered structures were successfully fabricated with conventional three-axis FDM machines. The response of these curved lattice structures under tensile loads was mapped to three main stages and deformation mechanisms, namely, straightening, stretching and fracture. The micro-structure formed by the transverse filaments affect the first stage significantly and the other two minimally. The main parameters that affect the structural response were found to be the transverse filaments, as these could behave as hinges, allowing the slide/rotation of adjacent layers and making the structure more shear sensitive.

This paper was restricted to arc-curved samples fabricated with conventional three-axis FDM machines.

The FDM fabrication of curved-structures with controlled porosity and their relation to the resulting mechanical properties is presented here for the first time. The study of curved-lattice structures is of great relevance in various areas, such as biomedical, architecture and aerospace.

While additive manufacturing via melt-extrusion of plastics has been around for more than several decades, its application to complex geometries has been hampered by the discretization of parts into planar layers. This requires wasted support material and introduces anisotropic weaknesses due to poor layer-to-layer adhesion. Curved-layer manufacturing has been gaining attention recently, with increasing potential to fabricate complex, low-weight structures, such as mechanical metamaterials. This paper aims to study the fabrication and mechanical characterization of non-planar lattice structures under cyclic loading.

A mathematical approach to parametrize lattices onto Bèzier surfaces is validated and applied here to fabricate non-planar lattice samples via curved-layer fused deposition modeling. The lattice chirality, amplitude and unit cell size were varied, and the properties of the samples under cyclic-loading were studied experimentally.

Overall, lattices with higher auxeticity showed less energy dissipation, attributed to their bending-deformation mechanism. Additionally, bistability was eliminated with increasing auxeticity, reinforcing the conclusion of bending-dominated behavior. The analysis presented here demonstrates that mechanical metamaterial lattices such as auxetics can be explored experimentally for complex geometries where traditional methods of comparing simple geometry to end-use designs are not applicable.

The mechanics of non-planar lattice structures fabricated using curved-layer additive manufacturing have not been studied thoroughly. Furthermore, traditional approaches do not apply due to parameterization deformations, requiring novel approaches to their study. Here the properties of such structures under cyclic-loading are studied experimentally for the first time. Applications for this type of structures can be found in areas like biomedical scaffolds and stents, sandwich-panel packaging, aerospace structures and architecture of lattice domes.

This work presents an experimental approach to study the mechanical properties of non-planar lattice structures via quasi-static cyclic loading, comparing variations across several lattice patterns including auxetic sinusoids, disrupted sinusoids and their equivalent-density quadratic patterns.

The purpose of this paper is to design and develop a rotary three-dimensional (3D) printer for curved layer fused deposition modeling (CLFDM), and discuss some technical challenges in the development.

Some technical challenges include, but are not limited to, the machine design and control system, motion analysis and simulation, workspace and printing process analysis, curved layer slicing and tool path planning. Moreover, preliminary experiments are carried out to prove the feasibility of the design.

A rotary 3D printer for CLFDM has been designed and developed. Moreover, this printer can function as a polar 3D printer for flat layer additive manufacturing (AM). Compared with flat layer AM, CLFDM weakens the staircase effect and improves geometrical accuracy and mechanical properties. Hence, CLFDM is more suitable for parts with curved surfaces.

Double extruders have brought improved build speed. However, this paper is restricted to complex process planning and mechanical structures, which may lead to collisions during printing. Meanwhile, the rotation range of the nozzle is limited by mechanical structures, affecting the manufacturing capability of complex curved surfaces.

A novel rotary 3D printer, which has four degrees of freedom and double extruders, has been designed and manufactured. The investigation on the prototype has proved its capability of CLFDM. Besides, this rotary 3D printer has two working modes, which brings the possibility of flat layer AM and CLFDM.

The purpose of this paper is to explore how any proposed Women’s Health Strategy could address the needs of women affected by dementia in England.

The authors take the following three perspectives: women living with dementia, female carers and female practitioners supporting people with dementia.

In this paper, the authors explore the current evidence about dementia and female gender under three main strands relating to policy and practise.

There is worldwide interest amongst policy communities in gender inequalities.

This study aims to explore the role of the Indian merchant class in 19th-century colonial India in addressing the social concerns of disability. Specifically, it addresses why and how business engaged with disability in colonial India.

This study’s methodology entailed historiographical approach and archival investigation of official correspondence and letters of business people in 19th-century colonial India.

Using institutional theory, the study’s findings indicate that guided by philanthropic and ethical motives, Indian businesses, while recognizing the normative and cognitive challenges, accepted the regulative institutional pressures of colonial India and adopted an involved and humane approach. This manifested in the construction of asylums and the setting up of bequeaths and charitable funds for people with disability (PwD). The principal institutional drivers in making of the asylums and the creation of benevolent charities were religion, social practices, caste-based expectations, exposure to Western education and Victorian and Protestantism ideologies, the emergence of colonial notions of health, hygiene and medicine, carefully crafted socio-political and economic policies of the British Raj and the social aspirations of the native merchant class.

In contrast to the 20th-century rights-based movement of the West, which gave birth to the global term of “disability,” a collective representation of different types of disabilities, this paper locates that cloaked in individual forms of sickness, the identity of PwD in 19th-century colonial India appeared under varied fragmented labels such as those of leper, lunatic, blind and infirm. This paper broadens the understanding of how philanthropic business response to disability provided social acceptability and credibility to business people as benevolent members of society. While parallelly, for PwD, it reinforced social marginalization and the need for institutionalization, propagating perceptions of unfortunate and helpless members of society.

The purpose of this paper is to investigate the effect of rotation and a magnetic field on the wave propagation in a generalized thermoelastic problem for a medium with an internal heat source that is moving with a constant speed.

The formulation is applied to a generalized thermoelastic problem based on the three-phase-lag model and Green-Naghdi theory without energy dissipation. The medium is a homogeneous isotropic thermoelastic in the half-space.

The exact expressions of the displacement components, temperature, and stress components are obtained by using normal mode analysis.

Comparisons are made with the results predicted by the two models in the absence and presence of a magnetic field as well as a rotation. A comparison also is made with the results predicted by the two models for two different values of an internal heat source.

Static VAR compensators (SVC) have been recognized to be one of the most important flexible AC transmission systems devices used for mitigating the low-frequency electrochemical oscillations occurring in the system and for reactive power compensation, thereby improving the overall dynamic stability and efficiency of the system. The purpose of this paper is to optimize and dynamically tune the control parameters of the classical proportional integral and derivative (PID) controller of the SVC for a two-machine system by designing a new robust optimization technique.

The angular speed deviation between the two machines is used as an auxiliary signal to SVC for generation of the required damping output. To justify the efficacy of the system undertaken, a light load fault at time t = 1 s is projected to the system. The simulation is carried out in MATLAB/Simulink architecture.

The proposed technique helps in the enhancement of system efficiency, reliability and controllability and by effectively responding to the non-linearities taking place in a power grid network. The results obtained are indicative of the fact that the proposed modified brain storming optimization (MBSO) technique reduces system disturbances very quickly, increases the system response in terms of better rise time, settling time and peak overshoot and improves the efficiency of the system.

A detailed comparison of the MBSO technique is compared with the conventional brain storming optimization (BSO) and PID technique. Total harmonic distortion through fast Fourier transform is also compiled to prove that the values of the proposed MBSO method found out to be confined well within the prescribed IEEE-514 boundaries.