Search results

This article contributes to a better theoretical and empiric understanding of mixed results in the literature investigating the relationship between institutional confidence and adherence to recommended measures during a pandemic.

The article relies on structural equation models (SEMs) based on data from ResPOnsE COVID-19, a rolling cross-section (RCS) survey carried out in Italy from April to June 2020.

The authors’ findings show the existence of multiple pathways of confidence at the national and local level. Confidence in the institutions is positively associated with support for the performance of the Prime Minister and that of the regional institutions in the North West, which in turn, raises the likelihood of following the restrictive measures. However, in the same regions, a good appraisal of the regional system's performance also had a direct positive effect on the perception of being safe from the virus, decreasing adherence to the restrictive measures. Finally, the direct effect of confidence in the institutions on compliance is negative.

The result enlightens the crucial role both of national and local institutions in promoting or inhibiting adherence to restrictive measures during a pandemic and suggests that “one size fits all” measures for increasing overall institutional confidence might not be sufficient to reach the desired goal of achieving compliance in pandemic times.

The authors theorize and test three cognitive mechanisms – (1) the “cascade of confidence”; (2) the “paradox of support” and (3) the “paradox of confidence” – to account for both the positive and negative links between measures of political support and public acceptability of COVID-19 containment measures.

The sudden onset of COVID-19 has brought about a watershed moment in the current research across all disciplines. As it has impacted almost all aspects of human existence, academicians are aggressively trying to understand the phenomenon from multidisciplinary perspectives. In this regard, the present study attempts to provide an in-depth understanding of academia's response pattern in the field of social sciences using a grounded theory literature review and bibliometric analysis.

The present study analyzed 395 research articles on the pandemic phenomenon, yielding five main themes and 11 sub-themes.

The emergent research themes are global impact on public health, the influence of COVID-19 on workplace functioning, global governance in COVID-19, research ethics in scholarly works and the influence of COVID-19 on demography.

Drawing from these themes, the authors provide propositions, policy implications and future research directions.

The COVID-19 pandemic virus has affected the largest economies around the world, especially Group 8 and Group 20. The increasing numbers of confirmed and deceased cases of the COVID-19 pandemic worldwide are causing instability in stock indices every day. These changes resulted in the G8 suffering major losses due to the spread of the pandemic. This paper aims to study the impact of COVID-19 events using country lockdown announcement on the most important stock indices in G8 by using seven lockdown variables. To find the impact of the COVID-19 virus on G8, a correlation analysis and an artificial neural network model are adopted.

In this study, a Pearson correlation is used to study the strength of lockdown variables on international indices, where neural network is used to build a prediction model that can estimate the movement of stock markets independently. The neural network used two performance metrics including R² and mean square error (MSE).

The results of stock indices prediction showed that R² values of all G8 are between 0.979 and 0.990, where MSE values are between 54 and 604. The results showed that the COVID-19 events had a strong negative impact on stock movement, with the lowest point on the March of all G8 indices. Besides, the US lockdown and interest rate changes are the most affected by the G8 stock trading, followed by Germany, France and the UK.

The study has used artificial intelligent neural network to study the impact of US lockdown, decrease the interest rate in the USA and the announce of lockdown in different G8 countries.

A set of rules is presented for printing thick film resistors, whose implementation minimises losses due to resistors firing too high or too low, and also results in the shortest possible set‐up times. To the best of the authors' knowledge, some of the concepts and relations reported here are nowhere to be found spelled out in the published literature, let alone presented in quantitative form. One example is the relationship between sheet resistance vs resistor length curves and the mesh/emulsion of the screen used to obtain such curves. Another example is the relationship between the choice (or lack of it) of resistors used to set up thickness at the beginning of a print, and the spread in resistance values. Then there are better known relationships, like the dependence of thickness on resistor width or print direction—still no quantitative data are available and the potential relevance of these effects is generally not appreciated. Long set‐up times and yield losses need not exist, as they arise from non‐rigorous printing rules which call for a standard dry thickness (usually 25±3 µm) regardless of resistor dimensions, print direction and ink jar value, and which only call for a range of screen mesh/emulsion values, rather than for specific ones. In fact, for any given sheet resistance vs resistor length curve, only one choice of screen mesh/emulsion and resistor thickness is logically possible. Also reported are experimental data relating resistor thickness to resistor length as a function of screen mesh/emulsion, resistor width and print direction as well as data on sheet resistance as a function of resistor dry thickness. Finally, results from thirty‐eight production runs are reported and discussed.

Critical processing steps of COB manufacturing, as implemented at Epitek, are reported. They include testing of incoming boards, cleaning, bonding parameters, bonding defects and statistical process control.

Hybrid manufacturers are uncertain as to whether laser‐drilled holes on 96% alumina are suitable for mixed‐bonded thick film conductor metallisation, or whether they require further treatment before metallisation if reliable circuitry is to be produced. Moreover, although the metallisation of holes on ceramic through the use of screen printed thick films is fairly common in the hybrid industry, this paper shows that published information on this topic is scant, at times contradictory, and, because of proprietary constraints, generally of little use. The authors report on an extensive study in which both as‐laser‐drilled holes and thermally‐treated laser‐drilled holes are metallised using a mixed bonded Pd‐Ag conductor paste. Both encapsulated and non‐encapsulated metallised holes are then subjected to various accelerated life tests, followed by ‘power‐up’ tests to the extreme of circuit destruction. An account is also given of a printing set‐up which allows volume production of printed through‐holes without the need for special skill or attention on the part of the printing operator.

Transport shapes the health of urban populations. It can support healthy behaviours such as participation in regular physical activity and access to community connection. Transport systems can also have major negative impacts on health. For example, through air pollution from fossil fuel-based modes of travel, the risk of injury and death from transport related collisions, and in the way sedentary modes of travelling can contribute to less physically active lifestyles.

This chapter considers the long-term impact of the pandemic on a series of well-researched transport-related health outcomes. It first describes the established connections between transport and health. It then considers the future implications of three potential pandemic-induced shifts: the increased uptake of working from home (WFH); decreased usage of public transport and increased interest in walking and cycling in the local neighbourhood. The impacts of these shifts on the transport-health nexus are then discussed, revealing both positive and negative outcomes. The authors conclude by providing policy recommendations to mitigate possible negative outcomes and strengthen the positive consequences into the future.

The purpose of this paper is twofold: first, to present a set of critical factors for total quality management (TQM) and supply chain management (SCM) practices through an extensive literature review; and, second, to identify the relationships among them by comparing the identified TQM and SCM practices in order to explore the concept of supply chain quality management (SCQM).

To meet the goals of this work, a review of published quality research papers was carried out. For this, the authors identified papers on TQM and SCM practices and observed how these practices improve the business performance of organizations. Further, on the basis of identified practices, a conceptual model of SCQM was developed.

The results presented a set of six critical factors each for TQM and SCM practices. Further, it was found that management support and commitment, customer focus, information and supplier partnership are the most common practices found in both TQM and SCM practices. The integration of TQM and SCM (SCQM) throughout the supply chain has the strongest impact on the organizational performance.

The study used data from various research papers of reputed journals which considered the study of India’s manufacturing industry as well as other countries, which may not provide a clear picture. However, this can be overcome by applying the findings of this paper to collect data from Indian manufacturing industry in future studies.

Indian manufacturing industry can improve its competitive image through the synergy of TQM and SCM. The result of this paper will help in providing a greater understanding of identified TQM and SCM practices that will lead to the successful implementation of TQM and SCM strategies to enhance business performance in terms of the improved levels of customer service.

Much of the attention is given on TQM and SCM practices, and very few studies have been undertaken to integrate TQM and SCM practices. But as far as the authors know, there is no study undertaken to integrate TQM and SCM practices in India for the manufacturing class. Therefore, this study compares TQM and SCM practices and considers their integration and can be thus treated as filling a gap in the extant literature. Therefore, the findings of this review paper will contribute in future research.

This paper aims to explain the importance of the international cooperation and coordination among supervisory authorities of different countries in event of banking crises. It also suggests that the harmonious relationship has to be attained in the adoption of ex ante financial regulatory measures and ex post compensation schemes. In other words, the paper highlights the linkage between ex ante preventive regulatory measures and ex post compensation schemes, on the one hand, and cooperation among national regulatory and supervisory authorities in globalized financial markets. Although the paper is relevant to most developed and emerging financial markets, it chooses Hong Kong as a context to examine this proposal. In the current literature, there are no similar approach linking these two paradigms and examining them in an integrated context.

The paper adopts a conceptual framework after the 2008 global financial crisis and takes Hong Kong, an international financial centre in which numerous branches or subsidiaries of foreign financial institutions locate, as an example to examine how the coordination with foreign supervisory authorities are being conducted and to analyse whether the present regulatory framework in Hong Kong is effective and sufficient against banking crises. Through the review of the literature, the important link between ex ante regulatory measures and ex post compensation schemes is found to be significant in adopting proper solutions.

Through analysing the Hong Kong financial regulators’ reports on the collapse of Lehman Brother, the paper finds out that even though there is some weakness in the cooperation and coordination between regulators after the 2008 financial crisis, Hong Kong is still in the progress of proposing bank special resolution regime. Although there has been some awareness on the issue of coordination between home and host states regulatory measures, there is still a lack of awareness of the connection between regulatory measures and compensation schemes.

Conflict of interests could hardly be prevented in the course of cooperation and coordination among home and host regulatory authorities, and the coordination of the important link between ex ante regulatory measures and ex post compensation scheme which involves legal and economic analyses is a challenging task.

The paper’s findings show that there are practical implications for the recent rapid development of special resolution regime for global systematically important financial institutions against future banking crises and for managing the balance between the adoption of financial supervisory laws and special resolution measures.

This paper suggests that the harmonious coordination between ex ante regulatory measures and ex post compensation schemes has to be achieved through international context to avoid the absurd situations. This conceptual integrated framework presented in the current paper is not touched upon by the existing literature. This important concept is valuable for future research, and it is significant to financial regulators, legislators and the government in adjusting policy against banking crises in both developed and developing countries.

Mechanical properties of 100% polyester and polyester-viscose (P/V) blended yarns produced from polyester fibres which vary in denier and cross-sectional shape have been analyzed. It is observed that fibre fineness and cross-sectional shape play a significant role in the translation of fibre properties to the respective yarn properties. As the fibre linear density decreases, fibre strength translation efficiency increases. In the case of trilobal fibre, translation efficiency is observed to be lower, but yarn breaking elongation is higher in comparison to the corresponding circular fibre. Scalloped oval fibre contributes more towards yarn strength and elongation versus the equivalent circular and tetraskelion fibres. In the P/V blended form, a decrease in yarn tenacity does not affect fibre fineness, but is substantially influenced by changes in the fibre profile. Contribution of broken viscose fibres (comparatively weaker component) at the point of actual breaking of yarn, i.e. Z-value, is altered depending on the polyester fibre profile, which is higher in trilobal and scalloped oval fibres in comparison to the corresponding circular ones, but the role of fibre linear density in this regard is rendered insignificant.