Search results

Micro-focus X-ray computed tomography (CT) can be used to quantitatively evaluate the packing density, pore connectivity and provide the basis for specimen derived simulations of gas permeability of sand mould. This non-destructive experiment or following simulations can be done on any section of any size sand mould just before casting to validate the required properties. This paper aims to describe the challenges of this method and use it to simulate the gas permeability of 3D printed sand moulds for a range of controlling parameters. The permeability simulations are compared against experimental results using traditional measurement techniques. It suggests that a minimum volume of only 700 × 700 × 700 µm³ is required to obtain, a reliable and most representative than the value obtained by the traditional measurement technique, the simulated permeability of a specimen.

X-ray tomography images were used to reconstruct 3D models to simulate them for gas permeability of the 3D printed sand mould specimens, and the results were compared with the experimental result of the same.

The influence of printing parameters, especially the re-coater speed, on the pore connectivity of the 3D printed sand mould and related permeability has been identified. Characterisation of these sand moulds using X-ray CT and its suitability, compared to the traditional means, are also studied. While density and 3PB strength are a measure of the quality of the moulds, the pore connectivity from the tomographic images precisely relates to the permeability. The main conclusions of the present study are provided below. A minimum required sample size of 700 × 700 × 700 µm³ is required to provide representative permeability results. This was obtained from sand specimens with an average sand grain size of 140 µm, using the tomographic volume images to define a 3D mesh to run permeability calculations. Z-direction permeability is always lower than that in the X-/Y-directions due to the lower values of X-(120/140 µm) and Y-(101.6 µm) resolutions of the furan droplets. The anisotropic permeability of the 3D printed sand mould is mainly due to, the only adjustable, X-directional resolution of the furan droplets; the Y-directional resolution is a fixed distance, 102.6 µm, between the printhead nozzles and the Z-directional one is usually, 280 µm, twice the size of an average sand grain.A non-destructive and most representative permeability value can be obtained, using the computer simulation, on the reconstructed 3D X-ray tomography images obtained on a specific location of a 3D printed sand mould. This saves time and effort on printing a separate specimen for the traditional test which may not be the most representative to the printed mould.

The experimental result is compared with the computer simulated results.

The purpose of this paper is to review available technologies, analyse their features, propose a new approach of 3D sand mould printing based on line forming, introduce the manufacturing principle and show advantages of this approach, especially for larger parts with large Z steps in the build, such as 2 mm stepwise.

This paper introduces 3D sand mould printing, compares and analyses technological process and existing fabrication approaches among available technologies first. Then, a new approach of 3D sand mould printing is proposed to improve build speed. In addition, the proposed system will be analysed or benchmarked against existing systems.

A new approach based on line forming of sand mould printing is put forward by reviewing and analysing available technologies, to improve build speed from the aspect of basic moulding movement instead of optimization of moulding methods and process parameters. The theoretical calculation and analysis shows that build speed can be improved greatly, and it is more suitable for the manufacture of large-scale casting’s sand mould when considering dimensional accuracy and printing error, as well as uniformity of each layer.

The specific implement scheme of line forming and nozzle’s specific structure of this new approach need further study.

Much higher build speed of 3D sand mould printing with new approach brings evident implication for moulds companies and manufacturing industry, having a far-reaching influence on the development of national economy.

This paper reviews available technologies and presents a new approach of 3D sand mould printing for the first time. Analysis of the new approach shows that this new method of sand mould printing can boost build speed greatly. So, its application prospect is great.

The purpose of this study is to analyse the problem of high binder content in sand mould and to solve it. Meanwhile, to increase build speed, especially for heavy casting’s sand mould with a high value in layer height, such as 2 mm in construction instead of the industry standard of 0.3 mm, line forming for three-dimensional (3D) sand mould printing is researched.

Brief introduction of 3D sand mould printing and key issues are given first. Then, this paper quantitatively analyses binder content in sand mould. Finally, to acquire sand mould with appropriate binder content and high build speed, line forming combining traditional furan no-bake sand manufacture technique is researched, as well as relevant feasible schemes and current progress.

The study shows that compared with traditional technique, binder content in sand mould produced by available 3D printing technique is too high, bad for sand mould’s properties and quality of castings, while line forming brings guaranteed binder content and improved build speed.

More experiments are needed to demonstrate quantitative analysis of binder content and to obtain flowability of moist sand, detailed structure design of nozzle and practical build speed, as well as methods of circulation of materials considering solidification time.

Line forming with higher build speed and suitable binder content means excellent properties of sand mould and castings as well, bringing obvious implication for moulds industries and manufacturing industry.

This new method could increase build speed and meanwhile guarantee binder content. Thus, its application prospect is promising.

Optimised concrete components are often of complex geometries, which are difficult and costly to cast using traditional formworks. This paper aims to propose an innovative formwork system for optimised concrete casting, which is eco-friendly, recyclable and economical.

In the proposed formwork system, ice is used as mould pattern to create desired geometry for concrete member, then sand mould is fabricated based on the ice pattern. A mix design and a mixing procedure for the proposed sand mould are developed, and compression tests are also performed to ensure sufficient strength of the sand mould. Furthermore, surface preparation of the sand mould is investigated for easy demoulding and for achieving good concrete surface quality. Additionally, recyclability of the proposed sand mould is tested.

The proposed mix design and mixing procedure can provide sufficient strength for sand mould in concrete casting. The finished components exhibit smooth surfaces and match designed geometries, and the proposed sand mould can be fully recycled with satisfactory strength.

To the best of the authors’ knowledge, this is the first study that combines ice pattern and sand mould to create recyclable formwork system for concrete casting. The new techniques developed in this research has great potential to be applied in the fabrication of large-scale concrete structures with complex geometries.

The major concern technologies during the processing through three-dimensional printing (3DP) are the mechanical and boundary properties of sand models. The parameters such as activator content, resolution X, layer thickness and re-coater speed play a vital role in 3DP sand components. The purpose of this paper is to recommend the optimal process parameters for the best sand mold properties.

In this paper, taking the parameters of the activator content, resolution X, layer thickness and re-coater speed as the influence factors, an orthogonal test of L16(44) was designed to discuss the influences of those parameters on the mechanical and boundary properties. Three-point bending (3PB) test was used to characterize the actual bending strength, and the boundary accuracy was assessed by the deviation of the three-point bending samples compared with its design scale.

The experimental results showed that the resolution X and layer thickness are the main parameters affecting sand mold properties. The strength will attain its maximum when the resolution X and layer thickness are the minimum. The optimal parameters were screened and verified by the confirmation test. The optimal process parameters for best strength and less gas evolution are the activator of 0.19%, resolution X of 0.1 mm, layer thickness of 0.28 mm and re-coater speed of 210 mm/s.

The novelty of this paper is the select of significant parameters on 3D-printed sand model properties. A mathematical model was built to analyze the effect of these parameters. The optimal process parameters for the best properties were got.

Rapid tooling (RT) integrated with additive manufacturing technologies have been implemented in various sectors of the RT industry in recent years with various kinds of prototype applications, especially in the development of new products. The purpose of this study is to analyze the current application trends of RT techniques in producing hybrid mold inserts.

The direct and indirect RT techniques discussed in this paper are aimed at developing a hybrid mold insert using metal epoxy composite (MEC) in increasing the speed of tooling development and performance. An extensive review of the suitable development approach of hybrid mold inserts, material preparation and filler effect on physical and mechanical properties has been conducted.

Latest research studies indicate that it is possible to develop a hybrid material through the combination of different shapes/sizes of filler particles and it is expected to improve the compressive strength, thermal conductivity and consequently increasing the hybrid mold performance (cooling time and a number of molding cycles).

The number of research studies on RT for hybrid mold inserts is still lacking as compared to research studies on conventional manufacturing technology. One of the significant limitations is on the ways to improve physical and mechanical properties due to the limited type, size and shape of materials that are currently available.

This review presents the related information and highlights the current gaps related to this field of study. In addition, it appraises the new formulation of MEC materials for the hybrid mold inserts in injection molding application and RT for non-metal products.

In this paper, the effects of the adhesive and curing agent contents on the tensile strength, bending strength, gas evolution and gas permeability of three-dimensional printed sand molds are studied. A strength model of the three-dimensional printed sand molds is proposed. The multi-material composite sand mold forming test is carried out. In addition, the mesostructure of the sand mold is studied.

The performances of three-dimensional printed sand mold such as tensile strength, bending strength, gas evolution and gas permeability are studied using the standard test methods. The mesostructure of the sand mold is studied by digital core technology.

A sand mold strength model based on the resin adhesive content, curing agent content and sand mold compactness are obtained. Two types of multi-material composite three-dimensional printed sand molds are proposed. An increase in the curing agent content in the sand mold widens the mesoscopic characteristic size distribution of the sand mold, and large-sized mesostructures appear, resulting in a decrease in the sand mold bearing capacity.

Process parameters that affect the performance of three-dimensional printed sand mold are revealed. The sand mold bearing curve provides a reference for the ultimate design of three-dimensional printed sand mold.

The paper deals with experimental work on the performance and mesostructure of multi-material composite three-dimensional printed sand mold with different contents of adhesive and curing agent. That gives a perspective on future designs of sand mold based on these principles.

This paper aims to determine how the viscosity and curing agent content affect the flowability of moist silica sand granules. In addition, a coating device was designed according to the flow properties of silica sand granules.

The flowability of silica sand granules premixed with two curing agents of different viscosities is studied using a Jenike shear apparatus. An open-ended device was used in discharge testing of sand granules with a design based on the variable dip angle of the two plates and variable outlet size.

The test results show that increasing the curing agent content would significantly decrease the flowability of silica sand granules, and a curing agent of higher viscosity has a greater effect on the flowability of silica sand. The presence of a curing agent strengthens the cohesion among sand granules, lubricates them and restrains their deformation. The shape function of the coating device was obtained by theoretical derivation.

The flow properties provide a valuable theoretical guidance for the design of coating device for sand mold printing.

This paper deals with experimental work on flow properties of silica sand granules with different viscosities and curing agent content. The shape function of a wedge-shaped coating device is obtained based on experimental data.

Casting is one of the well-known manufacturing processes to make durable parts of goods and machinery. However, the quality of the casting parts depends on the proper choice of process variables related to properties of the materials used in making a mold and the product itself; hence, variables related to product/process designs are taken into consideration. Understanding casting techniques considering significant process variables is critical to achieving better quality castings and helps to improve the productivity of the casting processes. This study aims to understand the computational models developed for achieving better quality castings using various casting techniques.

A systematic literature review is conducted in the field of casting considering the period 2000–2020. The keyword co-occurrence network and word cloud from the bibliometric analysis and text mining of the articles reveal that optimization and simulation models are extensively developed for various casting techniques, including sand casting, investment casting, die casting and squeeze casting, to improve quality aspects of the casting's product. This study further investigates the optimization and simulation models and has identified various process variables involved in each casting technique that are significantly affecting the outcomes of the processes in terms of defects, mechanical properties, yield, dimensional accuracy and emissions.

This study has drawn out the need for developing smart casting environments with data-driven modeling that will enable dynamic fine-tuning of the casting processes and help in achieving desired outcomes in today's competitive markets. This study highlights the possible technology interventions across the metal casting processes, which can further enhance the quality of the metal casting products and productivity of the casting processes, which show the future scope of this field.

This paper investigates the body of literature on the contributions of various researchers in producing high-quality casting parts and performs bibliometric analysis on the articles. However, research articles from high-quality journals are considered for the literature analysis in identifying the critical parameters influencing quality of metal castings.

The systematic literature review reveals the analytical models developed using simulation and optimization techniques and the important quality characteristics of the casting products. Further, the study also explores critical influencing parameters involved in every casting process that significantly affects the quality characteristics of the metal castings.

The purpose of present paper is to enlarge the knowledge about the performance of gypsum powder to realize complex molds or cores for aluminum casting.

The research was divided into two activities: simple; and complex-part production capability. In the simple-part step, the performance of gypsum powder and the minimum mold thickness that would withstand the casting process. In the complex-part step, the authors first investigated the powder removability as a function of geometry complexity and then binder jetting performance was evaluated for the case of lattice-structure fabrication.

All the geometries tested withstand the casting process demonstrating the benefits in terms of complexity part design; however, the process suffers of all the typical defect of casting as misrun, porosity and cold shut.

The results found in this research improve the benefits related to additive manufacturing application in industrial environment and in particular to the binder jetting technology and the rapid casting approach.