Search results

The purpose of this paper is to present an exploratory study which aims to assess the potential use of 3D mapping of buildings and construction sites using unmanned aerial system (UAS) imagery for supporting the construction management tasks.

The case studies were performed in two different residential construction projects. The equipment used was a quadcopter equipped with digital camera and GPS that allow for the registry of geo-referenced images. The Pix4D Mapper and PhotoScan software were used to generate the 3D models. The study sought to examine three main constructs related to the 3D mapping developed: the easiness of development, the quality of the models in accordance with the proposed use and the usefulness and limitations of the mapping for construction management purposes.

The main contributions of this study include a better understanding of the development process of 3D mapping from UAS imagery, the potential uses of this mapping for construction management and the identification of barriers and benefits related to the application of these emerging technologies for the construction industry.

The importance of the study is related to the initiative to identify and evaluate the potential use of 3D mapping from UAS imagery, which can provide a 3D view of the construction site from different perspectives, for construction management tasks applications, trying to bring positive contributions to this knowledge area.

This paper aims to focus on real-world mobile systems, and thus propose relevant contribution to the special issue on “Real-world mobile robot systems”. This work on 3D laser semantic mobile mapping and particle filter localization dedicated for robot patrolling urban sites is elaborated with a focus on parallel computing application for semantic mapping and particle filter localization. The real robotic application of patrolling urban sites is the goal; thus, it has been shown that crucial robotic components have reach high Technology Readiness Level (TRL).

Three different robotic platforms equipped with different 3D laser measurement system were compared. Each system provides different data according to the measured distance, density of points and noise; thus, the influence of data into final semantic maps has been compared. The realistic problem is to use these semantic maps for robot localization; thus, the influence of different maps into particle filter localization has been elaborated. A new approach has been proposed for particle filter localization based on 3D semantic information, and thus, the behavior of particle filter in different realistic conditions has been elaborated. The process of using proposed robotic components for patrolling urban site, such as the robot checking geometrical changes of the environment, has been detailed.

The focus on real-world mobile systems requires different points of view for scientific work. This study is focused on robust and reliable solutions that could be integrated with real applications. Thus, new parallel computing approach for semantic mapping and particle filter localization has been proposed. Based on the literature, semantic 3D particle filter localization has not yet been elaborated; thus, innovative solutions for solving this issue have been proposed. Recently, a semantic mapping framework that was already published was developed. For this reason, this study claimed that the authors’ applied studies during real-world trials with such mapping system are added value relevant for this special issue.

The main problem is the compromise between computer power and energy consumed by heavy calculations, thus our main focus is to use modern GPGPU, NVIDIA PASCAL parallel processor architecture. Recent advances in GPGPUs shows great potency for mobile robotic applications, thus this study is focused on increasing mapping and localization capabilities by improving the algorithms. Current limitation is related with the number of particles processed by a single processor, and thus achieved performance of 500 particles in real-time is the current limitation. The implication is that multi-GPU architectures for increasing the number of processed particle can be used. Thus, further studies are required.

The research focus is related to real-world mobile systems; thus, practical aspects of the work are crucial. The main practical application is semantic mapping that could be used for many robotic applications. The authors claim that their particle filter localization is ready to integrate with real robotic platforms using modern 3D laser measurement system. For this reason, the authors claim that their system can improve existing autonomous robotic platforms. The proposed components can be used for detection of geometrical changes in the scene; thus, many practical functionalities can be applied such as: detection of cars, detection of opened/closed gate, etc. […] These functionalities are crucial elements of the safe and security domain.

Improvement of safe and security domain is a crucial aspect of modern society. Protecting critical infrastructure plays an important role, thus introducing autonomous mobile platforms capable of supporting human operators of safe and security systems could have a positive impact if viewed from many points of view.

This study elaborates the novel approach of particle filter localization based on 3D data and semantic mapping. This original work could have a great impact on the mobile robotics domain, and thus, this study claims that many algorithmic and implementation issues were solved assuming real-task experiments. The originality of this work is influenced by the use of modern advanced robotic systems being a relevant set of technologies for proper evaluation of the proposed approach. Such a combination of experimental hardware and original algorithms and implementation is definitely an added value.

In recent decades, the field of robotic mapping has witnessed widespread research and development in light detection and ranging (LiDAR)-based simultaneous localization and mapping (SLAM) techniques. This paper aims to provide a significant reference for researchers and engineers in robotic mapping.

This paper focused on the research state of LiDAR-based SLAM for robotic mapping as well as a literature survey from the perspective of various LiDAR types and configurations.

This paper conducted a comprehensive literature review of the LiDAR-based SLAM system based on three distinct LiDAR forms and configurations. The authors concluded that multi-robot collaborative mapping and multi-source fusion SLAM systems based on 3D LiDAR with deep learning will be new trends in the future.

To the best of the authors’ knowledge, this is the first thorough survey of robotic mapping from the perspective of various LiDAR types and configurations. It can serve as a theoretical and practical guide for the advancement of academic and industrial robot mapping.

Autonomous mobile robots (AMRs) play a crucial role in industrial and service fields. The paper aims to build a LiDAR-based simultaneous localization and mapping (SLAM) system used by AMRs to overcome challenges in dynamic and changing environments.

This research introduces SLAM-RAMU, a lifelong SLAM system that addresses these challenges by providing precise and consistent relocalization and autonomous map updating (RAMU). During the mapping process, local odometry is obtained using iterative error state Kalman filtering, while back-end loop detection and global pose graph optimization are used for accurate trajectory correction. In addition, a fast point cloud segmentation module is incorporated to robustly distinguish between floor, walls and roof in the environment. The segmented point clouds are then used to generate a 2.5D grid map, with particular emphasis on floor detection to filter the prior map and eliminate dynamic artifacts. In the positioning process, an initial pose alignment method is designed, which combines 2D branch-and-bound search with 3D iterative closest point registration. This method ensures high accuracy even in scenes with similar characteristics. Subsequently, scan-to-map registration is performed using the segmented point cloud on the prior map. The system also includes a map updating module that takes into account historical point cloud segmentation results. It selectively incorporates or excludes new point cloud data to ensure consistent reflection of the real environment in the map.

The performance of the SLAM-RAMU system was evaluated in real-world environments and compared against state-of-the-art (SOTA) methods. The results demonstrate that SLAM-RAMU achieves higher mapping quality and relocalization accuracy and exhibits robustness against dynamic obstacles and environmental changes.

Compared to other SOTA methods in simulation and real environments, SLAM-RAMU showed higher mapping quality, faster initial aligning speed and higher repeated localization accuracy.

This study aims to develop an optimized 3D laser point reconstruction using Descent Gradient algorithm. Precise and accurate reconstruction of 3D laser point cloud of the complex environment/object is a key solution for many industries such as construction, gaming, automobiles, aerial navigation, architecture and automation. A 2D laser scanner along with a servo motor/pan tilt/inertial measurement unit is used for generating 3D point cloud (either environment/object or both) by acquiring the real-time data from sensors. However, while generating the 3D laser point cloud, various problems related to time synchronization problem between laser and servomotor and torque variation in servomotors arise, which causes misalignment in stacking the 2D laser scan for generating the 3D point cloud of the environment. Because of the misalignment in stacking, the 2D laser scan corresponding to the erroneous angular and position information by the servomotor and the 3D laser point cloud become distorted in terms of inconsistency for measuring the dimension of the objects.

This paper addresses a modified 3D laser system assembled from a 2D laser scanner coupled with a servomotor (dynamixel motor) for developing an efficient 3D laser point cloud with the implementation of an optimization technique: descent gradient filter (DGT). The proposed approach reduces the cost function (error) in the angular and position coordinates of the servo motor caused because of torque variation and time synchronization, which resulted in enhancing the accuracy in 3D point cloud mapping for the accurate measurement of the object’s dimensions.

Various real-world experiments are performed with the proposed DGT filter linked with laser scanner and servomotor and an improvement of 6.5 per cent in measuring the accurate dimension of object is obtained while comparing with conventional approaches for generating a 3D laser point cloud.

This proposed technique may be applicable for various industrial applications that are based on robotics arms (such as painting, welding and cutting) in the automobile industry, the optimized measurement of object, efficient mobile robot navigation, precise 3D reconstruction of environment/object in construction, architecture applications, airborne applications and aerial navigation.

This paper aims to obtain a texture dental model with real images and improve the rendering effect of the dental model.

The paper proposes a semiautomatic method to construct a realistic dental model with real images based on two-dimensional/three-dimensional (2D/3D) registration. First, a 3D digital dental model and three intraoral images are obtained by a 3D scanner and digital single-lens reflex camera. Second, the camera projection poses for every intraoral images are calculated by using the single-objective optimization algorithm. Third, with camera poses, the preliminary projection texture mapping is performed; besides, the seam between two textures is marked. Finally, the marked regions are fused based on the image pyramid to eliminate obvious seams.

The paper provides a method to construct a realistic dental model. The method can map three intraoral images to the dental model. The experimental results show that the textured dental model without obvious distortion, dislocation and seams is constructed with simple interactions.

The proposed method can be applied to the digital smile design system to improve the communication efficiency between doctors, patients and technicians.

The purpose of this research is to outline in detail the procedure of remote data capture using laser scanning and the subsequent processing required in order to identify a new methodology for creating full engineering drawings (orthographic and 3D models) from laser scan and image survey data for historic structures.

Historic building information modelling (HBIM) is proposed as a new system of modelling historic structures; the HBIM process begins with remote collection of survey data using a terrestrial laser scanner combined with digital cameras. A range of software programs is then used to combine the image and scan data.

Meshing of the point cloud followed by texturing from the image data creates a framework for the creation of a 3D model. Mapping of BIM objects onto the 3D surface model is the final stage in the reverse engineering process, creating full 2D and 3D models including detail behind the object's surface concerning its methods of construction and material makeup, this new process is described as HBIM.

The future research within this area will concentrate on three main stands. The initial strand is to attempt improve the application of geometric descriptive language to build complex parametric objects. The second stand is the development of a library of parametric based on historic data (from Vitruvius to 18th century architectural pattern books). Finally, while it is possible to plot parametric objects onto the laser scan data, there is need to identify intermediate software platforms to accelerate this stage within the HBIM framework.

Realistic geometric description is essential for simulating physical properties of warp-knitted velvet fabrics, which are widely used for home-textiles and garments. The purpose of this paper is to provide an approach to the description of patterned piles and propose a customized simulation model to realize highly real-time simulation of warp-knitted velvet fabrics in three dimensions.

Based on knitting technology and structure features, a mathematical model to qualify forming possibility of piles is conducted by assessing underlaps of pattern bars and pile ground bars. When the pile areas and ground areas are classified, a three-dimensional (3D) space coordinate is built, of which the z-axis is divided into equal spaces to form certain multi-layer textured slices. Color and transparency of piles on each textured slice can be computed and generated by mapping to 3D geometrical grid layers with particular mapping relationship. Moreover, piles’ deflection and spatial collision are also taken into account to make sure high uniformity with real fabrics.

According to the models built, a simulator special for warp-knitted patterned velvet fabrics is programed via Visual C++ and the models are proven practical and easily implemented by comparing simulated effect of one sample with real fabric.

Because of present limited research, 3D simulation of patterned velvet fabrics knitted on double-needle bar Raschel machine as well as 3D shadow effect will be studied in the further research.

The paper includes implications for designing patterned velvet products and shows convenience to instantly see finished effect without sampling on machine.

This paper fulfills a featured simulation method for warp-knitted patterned velvet fabrics in 3D dimensions for the first time.

The purpose of this study is to solve the problem of an unknown initial position in a multi-robot raster map fusion. The method includes two-dimensional (2D) raster maps and three-dimensional (3D) point cloud maps.

A fusion method using multiple algorithms was proposed. For 2D raster maps, this method uses accelerated robust feature detection to extract feature points of multi-raster maps, and then feature points are matched using a two-step algorithm of minimum Euclidean distance and adjacent feature relation. Finally, the random sample consensus algorithm was used for redundant feature fusion. On the basis of 2D raster map fusion, the method of coordinate alignment is used for 3D point cloud map fusion.

To verify the effectiveness of the algorithm, the segmentation mapping method (2D raster map) and the actual robot mapping method (2D raster map and 3D point cloud map) were used for experimental verification. The experiments demonstrated the stability and reliability of the proposed algorithm.

This algorithm uses a new visual method with coordinate alignment to process the raster map, which can effectively solve the problem of the demand for the initial relative position of robots in traditional methods and be more adaptable to the fusion of 3D maps. In addition, the original data of the map can come from different types of robots, which greatly improves the universality of the algorithm.

The purpose of this study is to designed a robot odometry based on three dimensional (3D) laser point cloud data, inertial measurement unit (IMU) data and real-time kinematic (RTK) data in underground spatial features and gravity fluctuations environment. This method improves the mapping accuracy in two types of underground space: multi-layer space and large-scale scenarios.

An IMU–Laser–RTK fusion mapping algorithm based on Iterative Kalman Filter was proposed, and the observation equation and Jacobian matrix were derived. Aiming at the problem of inaccurate gravity estimation, the optimization of gravity is transformed into the optimization of SO(3), which avoids the problem of gravity over-parameterization.

Compared with the optimization method, the computational cost is reduced. Without relying on the wheel speed odometer, the robot synchronization localization and 3D environment modeling for multi-layer space are realized. The performance of the proposed algorithm is tested and compared in two types of underground space, and the robustness and accuracy in multi-layer space and large-scale scenarios are verified. The results show that the root mean square error of the proposed algorithm is 0.061 m, which achieves higher accuracy than other algorithms.

Based on the problem of large loop and low feature scale, this algorithm can better complete the map loop and self-positioning, and its root mean square error is more than double compared with other methods. The method proposed in this paper can better complete the autonomous positioning of the robot in the underground space with hierarchical feature degradation, and at the same time, an accurate 3D map can be constructed for subsequent research.