Search results

Three-dimensional (3D) printing has great potential in the food industry. While 3D printing technology offers customised food products to consumers, it also allows producers to develop new products using a wide variety of alternative food ingredients, modernise the production process and carry out environmentally friendly production. This research aims to determine the attitudes of students towards 3D foods who are studying in the Department of Gastronomy and Culinary Arts, as they are both consumers and examine different food processing systems and use them in the field of application. As a result of the study, it was identified that the participants believed that 3D printing is a great modern technology that allows the development of new foods, that it will bring benefit to us in the future, reduce the cost of food and food waste, increase the sustainability of food and that they see it as environmentally friendly. In addition, it was determined that the participants did not think that 3D-printed foods were disgusting; they found these foods reliable, could try them in the future and were excited to experience them.

This paper aims to establish a lattice Boltzmann (LB) method for solid-liquid phase transition (SLPT) from the pore scale to the representative elementary volume (REV) scale. By applying this method, detailed information about heat transfer and phase change processes within the pores can be obtained, while also enabling the calculation of larger-scale SLPT problems, such as shell-and-tube phase change heat storage systems.

Three-dimensional (3D) pore-scale enthalpy-based LB model is developed. The computational input parameters at the REV scale are derived from calculations at the pore scale, ensuring consistency between the two scales. The approaches to reconstruct the 3D porous structure and determine the REV of metal foam were discussed. The implementation of conjugate heat transfer between the solid matrix and the solid−liquid phase change material (SLPCM) for the proposed model is developed. A simple REV-scale LB model under the local thermal nonequilibrium condition is presented. The method of bridging the gap between the pore-scale and REV-scale enthalpy-based LB models by the REV is given.

This coupled method facilitates detailed simulations of flow, heat transfer and phase change within pores. The approach holds promise for multiscale calculations in latent heat storage devices with porous structures. The SLPT of the heat sinks for electronic device thermal control was simulated as a case, demonstrating the efficiency of the present models in designing and optimizing SLPT devices.

A coupled pore-scale and REV-scale LB method as a numerical tool for investigating phase change in porous materials was developed. This innovative approach allows for the capture of details within pores while addressing computations over a large domain. The LB method for simulating SLPT from the pore scale to the REV scale was given. The proposed method addresses the conjugate heat transfer between the SLPCM and the solid matrix in the enthalpy-based LB model.

The purpose of this paper is to provide a new procedure for in-plane compensation of geometric errors that often appear in the layers deposited by an additive manufacturing (AM) process when building a part, regardless of the complexity of the layer geometry.

The procedure is based on comparing the real layer contours to the nominal ones extracted from the STL model of the part. Considering alignment and form deviations, the compensation algorithm generates new compensated contours that match the nominal ones as closely as possible. To assess the compensation effectiveness, two case studies were analysed. In the first case, the parts were not manufactured, but the distortions were simulated using a predictive model. In the second example, the test part was actually manufactured, and the distortions were measured on a coordinate measuring machine.

The geometric deviations detected in both case studies, as evaluated by various quality indicators, reduced significantly after applying the compensation procedure, meaning that the compensated and nominal contours were better matched both in shape and size.

Although large contours showed deviations close to zero, dimensional overcompensation was observed when applied to small contours. The compensation procedure could be enhanced if the applied compensation factor took into account the contour size of the analysed layer and other geometric parameters that could have an influence.

The presented method of compensation is applicable to layers of any shape obtained in any AM process.

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

This study aims to explore how libraries in the United Arab Emirates use technology to preserve and digitize cultural and historical documents. It examined how these institutions use different technology models to facilitate the dissemination of UAE’s cultural traditions, practices, historical experiences and expressions to the local and global populations interested in learning about the country.

This study relied heavily on a review of the relevant literature and case studies covering how UAE libraries use technology to preserve, document and share tangible and intangible cultural heritage. The methodology entailed gathering and synthesizing relevant information from scholarly journal articles, government and reputable institutional resources online and reports. Collectively, it led to a close analysis of the impact of technology on cultural preservation and an assessment of the specific technology models preferred for optimal outcomes in preserving and disseminating cultural heritage information of the UAE.

Multiple UAE libraries rely heavily on technology to collect, record, translate and store cultural heritage information, including releasing it to users when required. The National Archives of the United Arab Emirates, the Arabian Gulf Digital Archive, Mohammed Bin Rashid Library, the UAE National Library and Archives, New York University Abu Dhabi and Khalifa University of Science and Technology and Research libraries have leveraged different technological models and tools to make UAE’s cultural heritage information available and accessible globally. Artificial intelligence and machine learning algorithms, three-dimensional imaging and scanning, electronic archiving systems, document management systems and ICT storage systems have helped the UAE libraries to promote and disseminate the nation’s tangible and intangible cultural heritage.

By relying on scholarly and authoritative sources of information and evidence to draw conclusions, this study contributes to the existing literature by offering insights into the innovative strategies used by UAE libraries to leverage technology for cultural preservation and promotion. In underlining the value of digital approaches to safeguard tangible and intangible cultural heritage, the research highlights the instrumentalism of technology in preserving the UAE’s cultural heritage and identity.

This study aims to propose and develop a new digital collaborative supply chain (CSC) model completely based on the emerging Industry 4.0 technologies. The digital model aims to support the main factors likely to affect CSC. This proposed model combines the most well-known digital tools such as blockchain technology, Internet of Things (IoT) and cloud computing (CC).

Motivated by its effective solution to enhance trust, traceability, transparency and minimize costs and risks, the combination of the most well-known digital tools such as blockchain technology, IoT and CC to develop a new digital CSC model is addressed in this research. This study first investigates and conducts a deep review analysis that explores how Industry 4.0 technologies can enable collaboration mechanisms. Second, based on an analysis of literature review, the main factors likely to affect CSC have been identified and analysed. Finally, the authors combine digital tools to support the identified factors to enhance transparency, traceability and trust by proposing a new digital CSC model. This proposed model will be used as a referential guide to encourage and motivate SC actors to collaborate in digital CSC.

This work provides many important contributions to theory and practice. First, role and impacts of the most well-known digital tools such as blockchain technology, IoT and CC for digitizing CSC have separately presented and developed. Second, the authors conceptualized a framework by developing a new digital CSC model. This conceptual digital model can be used as a referential guide for all SC actors in order to motivate them to collaborate in a modern, intelligent, secure and reliable SC. It can also support all factors affecting CSC.

The originality of this study is first investigating separately the roles and impacts of each digital tool on CSC performance. Second, the authors combine the most well-known digital tools such as blockchain technology, IoT and CC in order to develop an efficient, smart, modern and new digital CSC model. In this combination, CC is used as platform as a service enabling to link and connect the blockchain and IoT to support the main factors affecting CSC. Unlike to digital CSC model with only one digital tool, the proposed model is more realistic since depending on the information to be shared with other actors, the most appropriate tool will be automatically detected and used. This solution offers a large choice to SC actors for real time data and information sharing. In addition, the proposed model will largely enhance traceability, transparency and trust in CSC.

The interpretation of any emerging form or period in art history was never a trivial task. However, in the case of digital art, technology, becoming an integral part, multiplied the complexity of describing, systematizing and evaluating it. This article investigates the most common metadata standards for the documentation of art as a broad category and suggests possible next steps toward an extended metadata standard for digital art.

Describing several techno-cultural phenomena formed in the last decade, manifesting the extendibility of digital art (its ability to be easily extended across multiple modalities), the article, at first, points to the long overdue need to re-evaluate the standards around it. Then it suggests a deeper analysis through a comparative study. In the scope of the study three artworks, The Arnolfini Portrait (Jan van Eyck), an iconic example of the early Renaissance, The World's First Collaborative Sentence (Douglas Davis), a classic example of early Internet art and Fake It Till You Make It (Maya Man), a prominent example of the blockchain art, are examined following the structure of the VRA Core 4.0 standard.

The comparative study demonstrates that digital art is more multi-semantic than traditional physical art, and requires new taxonomies as well as approaches for data acquisition.

Acknowledging that digital art simply has not yet evolved to the stage of being systematically collected by cultural institutions for documentation, curation and preservation, but otherwise, in the past few years, it has been at the front-center of social, economic and technological trends, the article suggests looking for hints on the future-proof extended metadata standard in some of those trends.

The importance of modeling digital leadership in quickly digitizing countries, like the United Arab Emirates (UAE), is inevitable for building leadership capabilities to lead, engage and motivate remote employees in the digital environment. Using Blake and Mouton Grid, the current study examines the behavioral approach used by the leaders from both public and private sectors while managing their workforce digitally in the period of the pandemic, when 70% of the workforce worked remotely for the first-time in the region.

An online survey was conducted by the managerial employees working in different firms using self-administered questionnaires and adopting the snowball sampling technique. In total, 476 respondents participated in the study from both the Emirates of Abu Dhabi and Dubai.

The analysis using IBM SPSS and Smart PLS software reported that 9 out of 10 leaders positioned their digital leadership style well above the middle-of-the-road management style (5,5) oriented towards team management (9,9); with 7 out of 9 displaying high team management leadership style, while managing remote workers. However, millennials displayed higher task orientation when compared to generation-x leaders, who concentrated more on their relations with the workers.

The findings have implications for practitioners in technology driven regions. Also the results highlighting the task-oriented approach of millennials digital leaders have implication for owners and board of directors of the firms that seniority is not the only credible approach for leadership positions.

The study reveals the behavioral styles beneficial for digital leaders to develop their leadership capabilities and increase their effectiveness while managing the workforce digitally. Black Mountain Grid and its two-dimensional leadership matrix has been found to be a useful conceptual approach for understanding digital leadership behaviors, and based on study findings, recommendations have been provided to effectively improve its utilization for leading teams. The findings have implications for practitioners in technology driven regions as well as digital leadership field scholars.

The tourism industry is seeing unprecedented growth due to the convergence of the internet and growing travel trends. E-tourism digitises the tourism business, including processes, value chains, infrastructure, services and auxiliary industries, to maximise efficiency and effectiveness. It is in response to the globalisation of the tourism sector, which has spurred the introduction of information and communications technologies (ICTs) during the past four decades. ICT can boost travellers' satisfaction by providing pre-trip information about tourism attractions and allowing them to contact vendors directly, obtain accurate information and get the lowest price.

ICT has made the global tourism sector more competitive by providing pre-trip information about tourism attractions, allowing tourists to contact vendors directly, obtain accurate information and get the lowest price. Search engines, transport capacity and network speeds have increased the number of international travellers who use technology to organise and document their trips. E-tourism reduces seasonality, improves consumer communication and boosts reservations and sales. ICT also affects customer behaviour management and future marketing models and supports tourism industry globalisation by providing practical tools to tourism agents to develop and disseminate their offers globally. Strategic behaviours significantly impact tourism, as eliminating intermediaries shortens the distance between client and provider. ICT is a new way to boost tourism demand, which attracts more tourists and generates more revenue while improving the sector.