Category:Mechanical and Materials Engineering
Table Of Contents: Volume 9 Issue 5
Method for computing the shear capacity of prestressed reinforced concrete beams based on truss-arch modelJiawei Wang, Jinliang Liu, Guanhua Zhang, Yanmin Jia
The calculation of the shear capacity of inclined section for prestressed reinforced concrete beams is an important topic in the design of concrete members. The purpose of…
Experimental study on prestressed concrete hollow slabs in service strengthened with prestressed CFRP platesJiawei Wang, Yanmin Jia, Guanhua Zhang, Jigang Han, Jinliang Liu
Most existing studies are confined to model beam tests, which cannot reflect the actual strengthening effects provided by prestressed carbon-fiber-reinforced polymer…
The purpose of this paper is to carry out the application of risk reliability-based underwater inspection (RReBUI).
Influence of sulfuric and hydrochloric acid on the resistance of geopolymer cement with nano-silica additive for oil well cement applicationSyahrir Ridha, Afif Izwan Abd Hamid, Riau Andriana Setiawan, Ahmad Radzi Shahari
The purpose of this paper is to investigate the resistivity of geopolymer cement with nano-silica additive toward acid exposure for oil well cement application.
Analytical and numerical study of the serviceability performance of partial composite steel-FRP beamsAmr M.I. Sweedan, Hothifa N. Rojob, Khaled M. El-Sawy
The purpose of this paper is to introduce a closed-form analytical solution to evaluate the nominal moment capacity and associated deflections of steel-FRP beam systems…
A delamination fracture analysis of two-dimensional functionally graded multilayered end-loaded split beam configuration with non-linear mechanical behaviour of material…
Quantification of weld size parameters for throat failure prevention in a brake flange axle weld subjected to torsional loading with structural stress approachAnoop Vasu, Jerry Chung, Cory Padfield, Ravi Desai
The brake reaction test performed on a rear axle assembly revealed that the brake flange weld could not sustain the load needed to pass the minimum requirement of the…
Study on behaviour of geometrically scaled glass reinforced epoxy tubes subjected to non-coincident quasi static-indentationFahad Almaskari, Farrukh Hafeez
The purpose of this paper is to study the behaviour of glass reinforced epoxy tubes subjected to repeated indentation loads at two non-coincident indentations 180° apart.
Theoretical and experimental study on driving force and flow characteristics of damping control valve of shock absorberFangwei Xie, Dengshuai Wang, Cuntang Wang
The purpose of this paper is to study the flow characteristics of damping control valve of shock absorber, and obtain the minimum driving current required under different…
It is common practice in structural engineering to assume floor diaphragms infinitely stiff in their own plane. But, most of the code provisions lack clarity and unity in…
Online date, start – end:2010
Copyright Holder:Emerald Publishing Limited
- Prof Chris Rodopoulos