Microelectronics International: Volume 32 Issue 3


Table of contents - Special Issue: IMAPS-CPMT 2014 Poland

Guest Editors: Dr Agata Skwarek

Magnetoelectric properties in bulk and layered composites

Piotr Guzdek, Marek Wzorek

The purpose of the paper was to present a comparative study on the microstructure and magnetoelectric effect of new magnetoelectric composites based on TbFe2 compound and…

Thermoelectric properties of thin-film germanium-based layers

Piotr Markowski, Eugeniusz Prociów, Łukasz Urbaniak

The purpose of this paper is to determine the thermoelectric properties of the germanium-based thin films and selecting the most suitable ones for fabrication of…

Impact analysis of LTCC materials on microstrip filters’ behaviour up to 13 GHz

Alena Pietrikova, Kornel Ruman, Tibor Rovensky, Igor Vehec

The purpose of this paper is to consider the adequacy of various microstrip filters’ behaviour based on different low-temperature co-fired ceramic (LTCC) dielectrics in…

Technology and application of the LTCC-based microfluidic module for urea determination

Karol Malecha, Elżbieta Remiszewska, Dorota G Pijanowska

The purpose of this paper is to focus on the technology and performance of the miniature microfluidic module for urea determination. The presented module was made using…

3D LTCC structure for a large-volume cavity-type chemical microreactor

Darko Belavič, Marko Hrovat , Kostja Makarovič , Gregor Dolanč, Andrej Pohar , Stanko Hočevar, Barbara Malič

– The purpose of this paper is to present the research activity and results to research and development society on the field of ceramic microsystems.

Embossing in fuel cell fabrication

Barbara Dziurdzia, Zbigniew Magonski, Henryk Jankowski

– The purpose of this paper is to present the embossing as a replication technique for structuring fuel channels in the anode-supported solid oxide fuel cells (SOFCs).

Material and technological aspects of high-temperature SiC device packages reliability

Marcin Myśliwiec, Ryszard Kisiel, Marek Guziewicz

The purpose of this paper is to deal with material and technological aspects of SiC diodes assembly in ceramic packages. The usefulness of combinations of different…

Investigation of electrical performance of silicon solar cells with transparent counter electrode

Kazimierz Drabczyk, Jaroslaw Domaradzki, Piotr Panek, Danuta Kaczmarek

The purpose of this paper was the investigation of transparent conducting oxide (TCO) applied as an additional part of front metal electrode of crystalline silicon solar…

Modelling mutual thermal coupling in LED modules

Krzysztof Górecki, Przemysław Ptak

– The purpose of this paper is to present an electrothermal model of the module containing power light emitting diodes (LEDs) situated on a common base.

Energy losses and DVFS effectiveness vs technology scaling

Piotr Kocanda, Andrzej Kos

This article aims to present complete analysis of energy losses in complementary metal-oxide semiconductor (CMOS) circuits and the effectiveness of dynamic voltage and…

Cover of Microelectronics International



Online date, start – end:


Copyright Holder:

Emerald Publishing Limited

Open Access:



  • Professor John Atkinson