COMPEL - The international journal for computation and mathematics in electrical and electronic engineering: Volume 31 Issue 4

Subject:

Table of contents - Special Issue: Selected papers from the 4th International Conference on Electromagnetic Fields, Health and Environment (EHE 2011)

Guest Editors: Carlos L. Antunes

Validation of the electromagnetic design of a total artificial heart under physical load conditions

Thomas Finocchiaro, André Pohlmann, Elena Cuenca Navalon, Marc Leßman, Ulrich Steinseifer, Kay Hameyer

The purpose of this paper is to introduce the RWTH's total artificial heart, ReinHeart, focusing on the design of the unique drive system.

Saline‐enhanced RF ablation on a cholangiocarcinoma: a numerical simulation

Carlos L. Antunes, Tony Richard O. Almeida, Nélia Raposeiro

Cholangiocarcinoma is an adenocarcinoma of the bile ducts which drain bile from the liver into the small intestine. Unfortunately, most patients are diagnosed at an advanced stage…

Algorithm‐based, drive design for a ventricular assist device

André Pohlmann, Marc Leßmann, Kay Hameyer

The purpose of this paper is to describe a design process for a drive of a ventricular assist device (VAD) under the consideration of constraints given by the application. In this…

Using a tubular electrode for radiofrequency ablation: Numerical and experimental analysis

Carlos L. Antunes, Tony Richard O. Almeida, Nélia Raposeiro, Belarmino Gonçalves, Paulo Almeida

Due to its good mechanical and biocompatibility characteristics, nitinol SEMS is a popular endoprothesis used for relieving stricture problems in hollow organs due to carcinomas…

Computer modelling and simulation of radiofrequency thermal ablation

Dagmara M. Dołęga, Jerzy Barglik

The purpose of this paper is to enable the correct selection of the radiofrequency thermal ablation (RFTA) process parameters for an individual patient by applying a computer…

The use of magnetic nanoparticles in low frequency inductive hyperthermia

Arkadiusz Miaskowski, Bartosz Sawicki, Andrzej Krawczyk

The purpose of this paper is to present the basic ideas of magnetic nanoparticles' usage in the breast cancer treatment, which is called magnetic fluid hyperthermia. The proposed…

Effect of the wall structure on the level of the radiated electric field due to indoor PLC circuit

Vesna Arnautovski‐Toševa, Khalil El Khamlichi Drissi, Kamal Kerroum

The purpose of this paper is to present a frequency domain analysis of high frequency behaviour of an indoor Powerline communications (PLC) circuit in the presence of a plaster…

Characterization of nanostructured copper films for electromagnetic shield

Daniele Desideri, Alvise Maschio, Marco Bolzan, Marco Natali, Monica Spolaore

The purpose of this paper is to obtain a multidisciplinary characterization of nanostructured copper films for electromagnetic shields.

Evaluation of induced AC voltages in underground metallic pipeline

Dan D. Micu, Levente Czumbil, Georgios C. Christoforidis, Andrei Ceclan, Denisa Şteţ

The purpose of this paper is to make a study of electromagnetic interference between electrical power lines and nearby underground metallic pipelines.

Human exposure during operation of GMAW‐P welding machines

Daniele Desideri, Alvise Maschio, Paolo Mattavelli

The purpose of this paper is to investigate the exposure of human workers to low and high frequency electromagnetic fields during operation of GMAW‐P welding machines.

Subcutaneous implanted antennas: interaction with biological tissues

N. Vidal, J.M. Lopez‐Villegas, J. Sieiro

The purpose of this paper is to study the interaction of electromagnetic fields with biological tissues in the presence of antennas implanted subcutaneously for biotelemetry…

Assessment of the electric field induced in the human tissue during magnetic stimulation of the spinal cord

Laura Darabant, Mihaela Cretu, Radu V. Ciupa, Dan D. Micu, Denisa Stet

The purpose of this paper is to estimate the electrical field induced in the spinal cord and nearby area during lumbar magnetic stimulation.

115

An innovative microwave system for wooden art object disinfestation

Anna Pia Pastore, Bruno Bisceglia, Roberto De Leo, Nicola Diaferia

Many objects made up of wood, as well as paper and carpets with artistic or cultural value, are seriously damaged by various infesting microorganisms and often such damage is…

Simulation of interferences between power lines and gas pipelines in unbalanced phase currents state

Denisa Şteţ, Dan Doru Micu, Levente Czumbil, Laura Darabant, Andrei Ceclan

The purpose of this paper is to compute the values of induced voltages and currents in an underground gas pipeline, which shares the same right of way with a high voltage power…

Internet application concept to trivialize EMF biomedical computing

Bartosz Sawicki, Bartosz Chaber, Jacek Starzyński, Robert Szmurło

The purpose of this paper is to describe a new concept of a computer system devoted to simulations of electromagnetic fields inside the human body. The main idea is based on…

Analysis and evaluation of good practices in the design of internet sites dedicated to electromagnetic fields and health

Claudia Giliberti, Angelico Bedini, Silvana Salerno

The purpose of this paper is to apply a dedicated checklist for the evaluation of good practice information in the design of Italian internet sites on electromagnetic fields (emf…

208

Impact of static electric field on prooxidant‐antioxidant balance in rats

Grzegorz Cieslar, Justyna Malyszek‐Tumidajewicz, Pawel Sowa, Aleksander Sieron

The purpose of this paper is to estimate the influence of long‐term, whole‐body exposure of rats to strong, static electric field with physical parameters generated nearby high…

Equivalent circuit of photovoltaic generator using Newton‐Raphson algorithm

Andreas D. Theocharis, Vasilis P. Charalampakos, Anastasios Drosopoulos, John Milias‐Argitis

The purpose of this paper is to develop a linearized equivalent electrical circuit of a photovoltaic generator. This circuit is appropriate to confront problems such as numerical…

Analysis of near‐field magnetic resonant energy coupling for high power light‐emitting diode illumination

Sucheng Liu, Luowei Zhou, Weiguo Lu, Anxin Li

The purpose of this paper is to model and analyze energy transfer through near‐field resonant coupling for high power light‐emitting diode (HPLED) illumination, with the intention…

Damping of subsynchronous resonance using self‐tuning PID and wavelet neural network

Soheil Ganjefar, Mohsen Farahani

Subsynchronous resonance (SSR) problem is often created in generator rotor systems with long shafts (non‐rigid shaft) and large inertias constituting a weakly damped mechanical…

Estimation of simulated transfer function to discriminate axial displacement and radial deformation of transformer winding

Peyman Karimifard, G.B. Gharehpetian, Ahmad Javid Ghanizadeh, Stefan Tenbohlen

The transfer function (TF) method is a reliable tool for the detection of the transformer winding deformation and displacement. One of the most important problems is the…

Parameter identification of Jiles‐Atherton model using SFLA

Ramezan‐Ali Naghizadeh, Behrooz Vahidi, Seyed Hossein Hosseinian

The purpose of this paper is to implement a simple, fast and accurate heuristic method for parameter determination of Jiles‐Atherton (JA) hysteresis model for representing…

Cover of COMPEL - The international journal for computation and mathematics in electrical and electronic engineering

ISSN:

0332-1649

Online date, start – end:

1982

Copyright Holder:

Emerald Publishing Limited

Open Access:

hybrid

Editor:

  • Prof Jan Sykulski