Industrial Lubrication and Tribology: Volume 72 Issue 10
Covers all automotive and industrial applications of lubricants
Table of contents
Experimental study on leakage and wear characteristics of C/C composite finger seal
Fei Lu, Jian Liu, Hongyan LuThe carbon/carbon (C/C) composite finger seal experiment was performed on a high-speed seal tester. The purpose of this paper is to investigate the leakage and wear…
A thermal EHL investigation on plate-pin hinge pairs in silent chains using a narrow finite line contact
Mingyu Zhang, Jing Wang, Jinlei Cui, Peiran YangThe purpose of this paper is to numerically study the variations of oil film pressure, thickness and temperature rise in the contact zone of plate-pin pair in silent chains.
Fabrication and characterization of TiB2-reinforced functionally graded aluminum matrix material
Ömer SavaşThis study aims to investigate the production and abrasive wear rate of functionally graded TiB2/Al composites. TiB2 particles have been spontaneously formed in liquid matrix…
Study on high-temperature wear and mechanism of Al-Si/graphite composites prepared by the die-casting process
Yafei Deng, Xiaotao Pan, Guoxun Zeng, Jie Liu, Sinong Xiao, Zhenquan ZhouThis paper aims to improve the tribological properties of aluminum alloys and reduce their wear rate.
An experimental study on the tribological performance of water-lubricated journal bearings with three different materials
Yanfeng Han, Lei Yin, Guo Xiang, Guangwu Zhou, Haizhou Chen, Xiaolin ZhengThe tribological behavior, i.e. friction coefficient and wear rate, and vibration characteristics of the water-lubricated bearing was investigated. The water-lubricated bearing is…
Study on tribological properties of surface concave convex micro-texture on the mold steel
Xiping Yang, Yonghong Fu, Jinghu Ji, Tianyang Chen, Caiyun PanThe purpose of this paper is to describe the tribological characteristics with different area density of concave-convex micro-texture on the mold surface. It is a new technology…
Optimization of crankpin bearing lubrication under dynamic loading considering effect of micro asperity contact
Vanliem Nguyen, Zhenpeng Wu, Vanquynh LeTo improve the lubrication and tribology performance (LTP) of the crankpin bearing, this paper aims to propose the optimization of the crankpin bearing parameters considering…
Modelling and analysis of slip conditions in hydrodynamic lubrication of a piston skirt-cylinder contact
Mustapha Mechalikh, Ibrahim Zidane, Abdessoufi Benhamou, Hamid Zaidi, Miloud Tahar AbbesAfter more than a century of agreement with the postulate of non-slip condition (adhesion to the wall), the study of fluid-solid boundary conditions has shown renewed interest…
Effect of taper error on the performance of gas foil conical bearing
Hongyang Hu, Ming Feng, Tianming RenThis paper aims to study the bearing performance with different cone angle errors, to study the effect law of manufacturing taper error on the properties of gas foil conical…
Measurement of roller chain wear lubricated with palm oil-based hexagonal boron nitride nanoparticles
Hilmi Amiruddin, Mohd Fadzli Bin Abdollah, Muhamad Aliff Danial Mohamad NizarThis study aims to introduce a novel technique which helped in quantifying the wear performance of a roller chain which was lubricated by using the palm oil-based hexagonal boron…
A new fatigue damage accumulation rating life model of ball bearings under vibration load
Li CuiBearings in electric machines often work in high speed, light load and vibration load conditions. The purpose of this paper is to find a new fatigue damage accumulation rating…
Theoretical optimization and experiment on lubrication of floating microgroove cylindrical seal
Junjie LuThe purpose of this paper is to analyze and improve the lubrication performance of a floating cylindrical seal by investigating micro spiral groove.
Ferrofluid lubrication for ball bearings to avoid starvation
Mancheng Xu, Guanghu Jin, Qingwen Dai, Wei Huang, Xiaolei WangThis paper aims to prevent oil starvation and improve the service life of the rolling bearings.
Assessment of artificial neural network for thermohydrodynamic lubrication analysis
Nenzi Wang, Chih-Ming TsaiIn this study, artificial neural networks (ANNs) are constructed and validated by using the bearing data generated numerically from a thermohydrodynamic (THD) lubrication model…
Using FEM to study the frictional instability induced by third-body particles confined in frictional interface
Xiaoyu Yan, Wei Wang, Xiaojun Liu, Jimin Xu, Lihong Zhu, Bingxun YangA finite element method (FEM) model of the frictional behavior of two rough surfaces with a group of third-body particles confined by the surface asperities is established. By…
A disigned method of the surface structure of suspended glass transport device based bionic structure of dragonfly wings
Siyang Gao, Bangcheng Zhang, Jianwei Sun, Wenrui LiuThe purpose of this paper is to design a biomimetic surface structure for use in a glass transport device to enhance the suspension lift of a glass transport unit.
Thermal effect on stability and minimum oil film thickness of a deep/shallow pockets conical bearing
Ningning Wu, Hong Guo, Shuai Yang, Shaolin ZhangThis paper aims to study the influence of thermal effect on the performance for a high-speed conical hybrid bearing including stability and minimum oil film thickness.
Correlation of tribo-mechanical properties of internal geometry structures of fused filament fabrication 3D-printed acrylonitrile butadiene styrene
Mohamad Nordin Mohamad Norani, Mohd Fadzli Bin Abdollah, Muhammad Ilman Hakimi Chua Abdullah, Hilmi Amiruddin, Faiz Redza Ramli, Noreffendy TamaldinThis study aims is to investigate the correlation between tribological and mechanical properties of the fused filament fabrication 3D-printed acrylonitrile butadiene styrene (ABS…
Effects of operating conditions on cavitation induction of spiral groove liquid-film seal (SG-LFS)
Zhentao Li, Xiaoli Yin, Jixiang Yue, Fuyu Liu, Muming Hao, Baojie RenThe purpose of this paper is to study the effects of operating conditions including process coefficient, lubricant viscosity and cavitation pressure on the cavitation of spiral…
Tribological performance of non-asbestos brake friction material in contact with brake disc of varying topography
Dinesh Shinde, Mukesh Bulsara, K.N. MistryThe purpose of this paper is to evaluate experimentally the influence of different surface roughness of the contacting disc on tribological performance of the non-asbestos brake…
Coupling analysis of the fatigue life and the TEHL contact behavior of ball screw under the multidirectional load
Jia-Jia Zhao, Ming-Xing Lin, Xian-Chun Song, Nan WeiThis paper aims to provide thermal elastohydrodynamic lubrication (TEHL) contact model to study all balls’ lubrication performance of the ball screw when the multidirectional load…
An investigation of impact-sliding behavior and fretting wear of tubes against different supports in steam generators
Kai Guo, Zhongli Han, Yipeng Wang, Yang Wang, Wei TanThe purpose of this study is to reveal the interaction behavior between tubes and supports in steam generators and study the fretting wear of tubes in different load conditions.
Numerical model of two-phase mechanical face seal with shallow grooves based on finite volume method
Wenbin Gao, Weifeng Huang, Tao Wang, Ying Liu, Zhihao Wang, Yuming WangBy modeling and analyzing the two-phase mechanical seal of the fan-shaped groove end face, which is prone to phase change, an effective method to study the flow field of the…
Influence of contact form on mechanical wear characteristics of single diamond scratching on Ta12W
Haiyong Wu, Hui HuangMechanical wear is the main wear form of abrasive single crystal diamond (SCD) grit. The mechanical wear of SCD grit has a significant influence on the tool life and machining…
ISSN:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz