Influence of glass powder incorporation on the physical-mechanical properties of sand concrete

Abstract

Purpose

This study is part of the valorization of local materials and the reuse of industrial waste in construction. This study aims to improve the physical-mechanical properties of sand concrete. This work is a continuation of previous studies conducted on sand concrete, the purpose of which is to introduce industrial waste into this material. For this purpose, a glass waste in powder form is added.

Design/methodology/approach

This study is focused on the effect of adding glass powder (GP) whose mass percentage varies from 0 to 40% with an interval of 10% to target the right composition that ensures the best compromise between the characteristics studied.

Findings

The results found show that the workability and density of the studied concretes decreased with increasing GP dosage. Indeed, the optimal addition which constitutes the best compromise between the studied properties is 10% of GP. Improvements of up to about 9% in the case of flexural strength and about 18% in the case of compressive strength. The thermal conductivity has been reduced by 12.74%, the thermal diffusivity which characterizes the notion of thermal inertia has been reduced by about 4% and the specific heat mass has been reduced by 7.80%. Also, the shrinkage has been reduced by about 20%. The microstructure of the studied composite shows a good homogeneity between the aggregates. Finally, the addition of GP to sand concrete gives very encouraging results.

Originality/value

The interest of this study is in two parts. The first one is the exploitation of local materials: dune sand, river sand and limestone filler to meet the growing demand for construction materials. And the second one is the reuse of glass waste, in the form of powder (GP), to solve the environmental problem. All this participates in the improvement of the physical-mechanical properties of sand concrete and the extent of its response to the development of an economical structural concrete.

Citation

Ammari, M.S., Tobchi, M.B., Amrani, Y., Mim, A., Bederina, M. and Ferhat, A. (2023), "Influence of glass powder incorporation on the physical-mechanical properties of sand concrete", World Journal of Engineering, Vol. 20 No. 2, pp. 314-324. https://doi.org/10.1108/WJE-08-2021-0474