Asymtek introduces four-position "Tilt" accessory for conformal coating applications

Citation

(2004), "Asymtek introduces four-position "Tilt" accessory for conformal coating applications", Soldering & Surface Mount Technology, Vol. 16 No. 2. https://doi.org/10.1108/ssmt.2004.21916bad.021

Asymtek introduces four-position "Tilt" accessory for conformal coating applications

Asymtek introduces four-position "Tilt" accessory for conformal coating applications

Keywords: Asymtek, Conformal coatings

Asymtek has released its new four-position Tilt accessory, available exclusively on the award winning SC-300 Swirl Coate applicator. The Tilt option provides coating access in areas not accessible from the standard vertical approach. Ideal for applying conformal coating to component sides or underneath parts on a printed circuit board, the mechanism tilts the SC-300 applicator in four positions: 30° from vertical to the left, right, front or back. Tilt is controlled by Asymtek's Easy Coat^™ for Windows NT^® software, and can be retrofitted to existing Century conformal coating systems (Plate 9).

Plate 9 The new four-position Tilt accessory from Asymtek

Asymtek's SC-300 Swirl Coat applicator operates in three modes for optimum flexibility and control: bead, monofilament and swirl. Mean Time Between Assist (MTBA) is significantly improved by minimizing material build up at the zero cavity nozzle. If necessary, a periodic clean up routine can be easily added to the coating program. The SC-300 offers high performance and easy maintenance for coating applications that utilize today's solvent-less (100 percent-solids) formulations, and coatings with greater than 100 cps. It can also be used with low viscosity film coating materials.

For further information, visit the Web site: www.asymtek.com.