Kistler launches the CoMo II-S control monitor

Sensor Review

ISSN: 0260-2288

Article publication date: 1 December 1998

Keywords

Citation

(1998), "Kistler launches the CoMo II-S control monitor", Sensor Review, Vol. 18 No. 4. https://doi.org/10.1108/sr.1998.08718dad.006

Publisher

:

Emerald Group Publishing Limited

Copyright © 1998, MCB UP Limited


Kistler launches the CoMo II-S control monitor

Kistler launches the CoMo II-S control monitor

Keywords Quality control, Signal processing

Kistler's new CoMo II-S control monitor type 5859A brings industry towards zero defect production. Simultaneously capturing two measurements, the CoMo II-S can represent either one as a function of time or one against the other. Production processes can then be controlled and monitored through freely definable analytical functions, e.g. thresholds, boxes, end position, tolerance band, etc. (see Plate 4).

Plate 4 Kistler launches the CoMo II-S control monitor

Although measuring up to 1,500 cycles per minute, the CoMo II-S takes only two or three cycles to calculate the appropriate range and automatically selects the best scale for the axes. From the average value, the CoMo II-S checks whether all processes measured are within the specified tolerance. Manufacturing can then commence once this is attained, ensuring that any imperfect parts are recognised and rejected through continuous monitoring.

The CoMo II-S can be used for the control and monitoring of any production process as it contains charge and voltage amplifiers. Therefore, piezoelectric sensors (force, pressure and acceleration) and potentiometric sensors (displacement and angle) can be connected.

For further information please contact Chris Collins, sales and marketing engineer, Kistler Instruments Limited. Tel: +44 (0)1420 544477; Fax: +44 (0)1420 544474.