A review on exploration of the mechanical characteristics of 3D-printed biocomposites fabricated by fused deposition modelling (FDM)
ISSN: 1355-2546
Article publication date: 20 December 2023
Issue publication date: 23 February 2024
Abstract
Purpose
This paper aims to investigate the current state of biocomposites used in fused deposition modelling (FDM) with a focus on their mechanical characteristics.
Design/methodology/approach
The study presents a variety of biocomposite materials that have been used in filaments for 3D printing by different researchers. The process of making filaments is then described, followed by a discussion of the process parameters associated with the FDM.
Findings
To achieve better mechanical properties of 3D-printed parts, it is essential to optimize the process parameters of FDM while considering the characteristics of the biocomposite material. Polylactic acid is considered the most promising matrix material due to its biodegradability and lower cost. Moreover, the use of natural fibres like hemp, flax and sugarcane bagasse as reinforcement to the polymer in FDM filaments improves the mechanical performance of printed parts.
Originality/value
The paper discusses the influence of critical process parameters of FDM like raster angle, layer thickness, infill density, infill pattern and extruder temperature on the mechanical properties of 3D-printed biocomposite.
Keywords
Citation
Anerao, P., Kulkarni, A. and Munde, Y. (2024), "A review on exploration of the mechanical characteristics of 3D-printed biocomposites fabricated by fused deposition modelling (FDM)", Rapid Prototyping Journal, Vol. 30 No. 3, pp. 430-440. https://doi.org/10.1108/RPJ-04-2023-0150
Publisher
:Emerald Publishing Limited
Copyright © 2023, Emerald Publishing Limited