Handbook of Coatings Additives, 2nd edition

Citation

(2006), "Handbook of Coatings Additives, 2nd edition", Pigment & Resin Technology, Vol. 35 No. 1. https://doi.org/10.1108/prt.2006.12935aac.002

Handbook of Coatings Additives, 2nd edition

Handbook of Coatings Additives, 2nd edition

Edited by John J. Florio and Daniel J. MillerISBN: 0-8247-5626-6CRC Press$179.95/£99.00

Keywords: Coatings, Additives

Removing guesswork and uncertainty in the use of commercial and emerging coatings technologies, Handbook of Coatings Additives, 2nd edition complies a wealth of information on the composition, properties, utilization, and performance of major classes of additives while alerting formulators to potentially damaging interactions and challenges in the selection and testing of these materials. The book offers an abundance of practical knowledge on the industry's most widely used compounds to accelerate and refine laboratory procedures, meet regulatory standards, and avoid hazards in the formulation of coatings additives. Completely updated to reflect current trends and advances in the field, the 2nd edition contains new and revised sections on:

• •

  aqueous, nonaqueous and powder coatings;

• •

  dispersants;

• •

  rheology modifiers for aqueous and nonaqueous systems;

• •

  surface modifiers and defoamers;

• •

  catalysts of amino, urethane and radiation curable systems;

• •

  additives for prevention of coating degradation by light, biochemical attack and corrosion inhibitors; and

• •

  adhesion promoters.

To order complete the order form online at: www.crcpress.com