THE IMPORTANCE OF OIL ELASTICITY

Abstract

Oil film thickness measurements made in the front main bearing of an operating 3.8 L, V‐6 engine were compared with rheological measurements made on a series of commercial and experimental oil blends. High‐temperature, high‐shear‐rate viscosity measurements correlated with the film thickness of all single‐grade and many multigrade oils. However, the film thickness provided by some multigrade oils were larger than could be accounted for by their high‐temperature, high‐shear‐rate viscosities alone. Although the pressure/viscosity coefficients of some of the oils were significantly different from those of the majority of oils tested, they were not oils which produced unusual film thicknesses. As a consequence, correcting oil viscosities for the esimated pressures acting within the bearing was unsuccessful in improving the correlations. The correlations were improved, however, by accounting for the elastic properties of the multigrade oils. Measurements of oil relaxation times at high temperatures and shear rates showed large differences in elastic properties among the test oils. A good correlation (R2 = 0.73) was obtained from a multiple linear regression of film thickness as a function of both high‐temperature, high‐shear‐rate viscosities and relaxation times.

Citation

Bates, T.W., Williamson, B., Spearot, J.A. and Murphy, C.K. (1988), "THE IMPORTANCE OF OIL ELASTICITY", Industrial Lubrication and Tribology, Vol. 40 No. 6, pp. 4-19. https://doi.org/10.1108/eb053384